low beam Citroen C3 PICASSO 2008.5 1.G Owner's Manual

Page 64 of 204

61
VISIBILITY
LIGHTING CONTROLS
System for selection and control of the
various front and rear lights providing
the vehicle's lighting.
Main lighting
The various front and rear lights of the
vehicle are designed to adapt the driv-
er's visibility progressively in relation to
the climatic conditions:
- side lights, to be seen,
- dipped headlamps to see without dazzling other drivers,
- main beam headlamps to see clearly when the road is clear.
Additional lighting
Other lights are installed to fulfi l the re-
quirements of particular visibility condi-
tions:
- a rear fog lamp,
- front fog lamps.
Programming
Various automatic lighting control
modes are also available according to
the following options:
- guide-me-home lighting,
- automatic lighting. Model without AUTO lighting
Model with AUTO lighting
automatic switching on of
the lamps,
Manual controls
The lighting commands are issued di-
rectly by the driver by means of the
ring
A and the stalk B .

A. main lighting mode selection ring,
with:
lamps off,
sidelamps only,

B. stalk for switching headlamps by pull-
ing: dipped headlamps/main beam
headlamps.
In the lamps off and sidelamps modes,
the driver can switch on the main beam
headlamps temporarily ("headlamp
fl ash") by maintaining a pull on the
stalk. dipped headlamps or main
beam headlamps.
Displays
Lighting of the corresponding indicator
lamp on the instrument panel confi rms
the selective switching on of the lighting
selected.

Page 66 of 204

VISIBILITY
Manual guide-me-home lighting
The temporary maintaining of the
dipped headlamps lighting after the ve-
hicle's ignition has been switched off
makes the driver's exit easier when the
light is poor.
Switching on

 With the ignition off, "fl ash" the
headlamps using the lever B .

 A second "headlamp fl ash" switches
the function off again.
Switching off
The manual guide-me-home lighting
switches off automatically after a set
time.
Daytime lights *
On vehicles fi tted with daytime lights,
the dipped beams come on when the
vehicle is started.
* According to country.
This warning light comes on on
the instrument panel.
Automatic lighting
The side lights and dipped headlamps
are switched on automatically, without
any action on the part of the driver,
when a low level of external light is de-
tected or in certain cases of activation
of the windscreen wipers.
As soon as the brightness returns to a
suffi cient level or after the windscreen
wipers are switched off, the lights are
switched off automatically.
Activation

 Turn ring A to the "AUTO" position.
The automatic lighting is accompa-
nied by a message on the multifunc-
tion display.
Deactivation

 Turn ring A to a position other than

"AUTO" . Deactivation is accompa-
nied by a message on the multifunc-
tion display.
The instruments and controls (instru-
ment panel, multifunction display, air
conditioning control panel, etc.) are not
lit, except on switching to the automatic
switching on of the lights mode or when
the lights are switched on manually.
This function can be activated/deacti-
vated by a CITROËN dealer.

Page 67 of 204

VISIBILITY
Manual guide-me-home lighting
The temporary maintaining of the
dipped headlamps lighting after the ve-
hicle's ignition has been switched off
makes the driver's exit easier when the
light is poor.
Switching on

 With the ignition off, "fl ash" the
headlamps using the lever B .

 A second "headlamp fl ash" switches
the function off again.
Switching off
The manual guide-me-home lighting
switches off automatically after a set
time.
Daytime lights *
On vehicles fi tted with daytime lights,
the dipped beams come on when the
vehicle is started.
* According to country.
This warning light comes on on
the instrument panel.
Automatic lighting
The side lights and dipped headlamps
are switched on automatically, without
any action on the part of the driver,
when a low level of external light is de-
tected or in certain cases of activation
of the windscreen wipers.
As soon as the brightness returns to a
suffi cient level or after the windscreen
wipers are switched off, the lights are
switched off automatically.
Activation

 Turn ring A to the "AUTO" position.
The automatic lighting is accompa-
nied by a message on the multifunc-
tion display.
Deactivation

 Turn ring A to a position other than

"AUTO" . Deactivation is accompa-
nied by a message on the multifunc-
tion display.
The instruments and controls (instru-
ment panel, multifunction display, air
conditioning control panel, etc.) are not
lit, except on switching to the automatic
switching on of the lights mode or when
the lights are switched on manually.
This function can be activated/deacti-
vated by a CITROËN dealer.

Page 129 of 204

i
!
i
!
i
117
PRACTICAL INFORMATION
CHANGING A BULB
Procedure for replacing a faulty bulb
with a new bulb .
Front lights

1. Direction indicators (H21 W amber).

2. Dipped headlamps (H7-55 W).

3. Main beam headlamps (H1-55 W).

4. Side lights (W 5 W).

5. Fog lamps (PSX24 W).
In certain climatic conditions
(low temperature, humidity), the
presence of condensation on
the inside of the headlamp and
light glass is normal ; it disap-
pears a few minutes after the lights
are switched on.
 Handle the bulbs using a dry
cloth.
The headlamps are fi tted with poly-
carbonate lenses, coated with a
protective varnish:

 do not clean them with a dry
or abrasive cloth or using a
detergent or solvent product,

 use a sponge and soapy water,

 when using a high pressure
washer on stubborn dirt, do not
spend too long on the head-
lamps, lights and their sur-
rounds to avoid damaging their
varnish and their seals.
Changing direction indicator bulbs Amber coloured bulbs, such as
the direction indicators, must be
replaced with bulbs of identical
specifi cations and colour.

 Remove the plastic protective cover.

 Pull the bulb-holder and replace the
bulb.
To refi t, carry out these operations in re-
verse order.
When refi tting, close the plastic
cover carefully to guarantee the
sealing of the headlamp. If either of the direction indicator
warning lights is fl ashing quickly,
one of the bulbs is faulty.

Page 130 of 204

i
118
PRACTICAL INFORMATION Changing integrated direction
indicator side repeaters
Contact a CITROËN dealer to obtain re-
placement repeaters.

 Insert a screwdriver on the edge of
the repeater.

 Tilt the screwdriver to extract the re-
peater and remove it.

 Disconnect the repeater connector.
When removing:
- be careful not to damage the paint- work of your vehicle with the screw-
driver,
- do not allow the wire and the con- nector to slide inside the wing.
To refi t, carry out these operations in re-
verse order.

Changing main beam headlamp
bulbs

 Remove the protective plastic cover
by pulling on the tab.

 Disconnect the bulb connector.

 Move the springs to release the
bulb.

 Remove the bulb and change it.
To refi t, carry out these operations in re-
verse order.
Changing side light bulbs

 Remove the protective plastic cover
by pulling on the tab.

 Pull the bulb-holder.

 Remove the bulb and replace it.
To refi t, carry out these operations in re-
verse order.
Changing dipped headlamp bulbs

 Remove the protective plastic cover
by pulling on the tab.

 Turn the bulb-holder by a quarter
turn.

 Remove the bulb and change it.
To refi t, carry out these operations in
reverse order.
If you experience any diffi culty
in replacing bulbs, contact your
CITROËN dealer.