lock CITROEN C4 2007 Service Manual

142
XI
P R A C T I C A L I N F O R M A T I O N If the headlamp bears this
symbol, any operation to
change the Xenon dual-
function directional head-
lamp (D1S - 35 W) must be carried
out by professionals (risk of elec-
trocution).
Consult a CITROËN dealer.
It is recommended to change both
bulbs at the same time if one of
them is faulty.
Dual-function Xenon headlamps
(dipped/main beam)
Additional main beams

 Remove the rubber cover.

 Rotate the bulb-holder a quarter
turn anti-clockwise and remove it
from its housing.

 Replace the faulty bulb.

 Reposition the bulb-holder by
pushing it in, tightening it by a
quarter turn clockwise.

 Refi t the rubber cover. When using a high-pres-
sure washer on persistent
marks, do not direct at the
lamps or their outlines for too long,
so as not to damage their coating
and their seals.
Model with Xenon headlamps
and directional headlamps

1. Dual-function Xenon head-
lamps (dipped/main beam)

2. Additional main beams
(H7 - 55 W)

3. Sidelamps (H6 W - 6 W)
(see previous page)

4. Direction indicators
(H21 - 21 W)
(see previous page) Changing fog-lamp bulbs
Consult a CITROËN dealer.

63
IV
A C C E S S
ELECTRIC WINDOWS
System intended to open or close a
window manually or automatically.
Fitted with a safety anti-pinch sys-
tem and a deactivation system for
the prevention of misuse of the rear
controls.

1. Front left electric window
control.

2. Front right electric window
control.

3. Rear right electric window
control.

4. Rear left electric window
control.

5. Deactivation of the rear
electric window controls
or
Deactivation of the rear
electric window and door
controls * .
One-touch electric windows
There are two options:
- manual mode

 Press or pull the control gently.
The window stops when the
control is released.
- automatic mode


Press or pull the control fi rmly.
The window opens or closes fully
when the control is released.

 Pressing the control again stops
the movement of the window.
The electric window controls re-
main operational for approximately
45 seconds after the ignition is
switched off or until the vehicle is
locked after a door is opened.
If one of the passenger windows
cannot be operated from the driv-
er's door control pad, carry out the
operation from the control for the
passenger door concerned. Safety anti-pinch
When the window rises and meets
an obstacle, it stops and partially
lowers again.
If the window cannot be closed (for
example, in the presence of ice),
immediately after the movement is
reversed:

 press and hold the control until
the window opens fully,

 then pull the control immediate-
ly and hold it until the window
closes,

 continue to hold the control for
approximately one second after
the window has closed.

The safety anti-pinch function
is not operational during these
operations.
* Depending on version.

64
IV
A C C E S S
Reinitialisation
If a window does not rise automatically,
its operation must be reinitialised:

 pull the control until the window
stops,

 release the control and pull it
again until the window closes
fully,

 continue to hold the control for
approximately one second after
the window has closed,

 press the control to lower the
window automatically to the low
position,

 when the window has reached
the low position, press the con-
trol again for approximately
one second.

The safety anti-pinch function is not
operational during these operations.
Deactivation of the rear
electric window controls
or
Deactivation of the rear
electric window and door
controls *

 For the safety of your children,
press control 5 to deactivate the
rear electric window controls re-
gardless of their position.
Indicator lamp on, the rear controls
are deactivated.
Indicator lamp off, the rear controls
are activated. Always remove the key from the
ignition when leaving the vehicle,
even for a short time.
If an obstacle is encountered during
operation of the electric windows,
you must reverse the movement of
the window. To do this, press the
control concerned.
When the driver operates the con-
trols for the passengers' electric
windows, he must ensure that no
one is preventing correct closing of
the windows.
The driver must ensure that the
passengers use the electric win-
dows correctly.
Be aware of children when operat-
ing the windows.
This control also deactivates the in-
terior controls of the rear doors (see
"Child safety - § Electric child lock").
This indicator lamp in the
instrument panel comes on
temporarily when deactivat-
ing and every time the igni-
tion is switched on.
Any other status of the indica-
tor lamp indicates a malfunction of
the system. Have it checked by a
CITROËN dealer.
* Depending on version.

94
VII
C H I L D S A F E T Y
MANUAL CHILD LOCK
Locking

 Turn the red control one quarter
of a turn to the right using the
ignition key.
Unlocking

 Turn the red control one quarter
of a turn to the left using the igni-
tion key.
ELECTRIC CHILD LOCK *
Mechanical system to prevent ope-
ning of the rear door using its interior
control.
The control is located on the edge of
each rear door. Remote control system to prevent
opening of the rear doors using their
interior controls and use of the rear
electric windows.
Activation

 Press the button A .
The indicator lamp on the button A
comes on, accompanied by a mes-
sage on the multifunction screen.
This indicator lamp remains on until
the child lock is deactivated. The indicator lamp on the button
A
switches off, accompanied by a mes-
sage on the multifunction screen.
This indicator lamp remains off until
the child lock is activated.
Any other status of the indicator
lamp indicates a malfunction of the
electric child lock. Have it checked
by a CITROËN dealer.
This system is independent and in
no circumstances does it take the
place of the central locking control.
Check the status of the child lock
each time you switch on the ignition.
Always remove the key from the
ignition when leaving the vehicle,
even for a short time.
In the event of a serious impact,
the electric child lock is deactiva-
ted automatically to permit the exit
of the rear passengers. This warning lamp comes
on temporarily on the instru-
ment panel when the child
lock is activated.
The control A is located on the dri-
ver's door, with the electric window
controls. Deactivation

 Press the button A again.
* Depending on version.
It also comes on when the ignition
is switched on, then switches off ap-
proximately ten seconds after the
engine is started.

100
S A F E T Y
Storing the seat belt
(3-door model)
Raise then lock part A , to retain the
seat belt buckle when it is unfastened.
It is necessary to remove the seat
belt from the buckle retainer before
moving the seat to access the rear
seat positions.
As a safety measure, these opera-
tions should only be done when sta-
tionary. Rear seat belts
Each rear seat is fi tted with a three-
point inertia reel seat belt.
Fastening

 Pull the strap, then insert the
tongue in the buckle.

 Check that the seat belt is faste-
ned correctly by pulling the strap.
Unfastening


Press the red button on the buckle.
Seat belt height adjustment
(5-door model)
When correctly adjusted, the seat
belt shoulder strap falls over the
middle of the shoulder.

 To adjust the belt, squeeze the
control and slide it in the direc-
tion required.
Unfastening

 To unfasten the belt, press on
the red button in the buckle.
The belt retracts automatically when
not in use.