height CITROEN C4 2007 Owners Manual
Page 42 of 279
55
III
C O M F O R T
Interior mirror
Adjustable mirror providing a central
rearward view.
Manual model
T h e m i r r o r i s fi t t e d w i t h a n i g h t - t i m e
anti-dazzle device.
Adjustment
Adjust the mirror so that the
glass is directed correctly in the
"day" position.
D a y / n i g h t p o s i t i o n
Pull the lever to change to the "night" anti-dazzle position.
Push the lever to change to the normal "day" position.
In order to prevent dazzle, the interior
mirror glass darkens automatically
depending on the intensity of the light
from the rear.
It lightens when the light (light beam of
following vehicles, sun...) decreases,
so guaranteeing optimum visibility.
S w i t c h i n g o n
Switch on the ignition and press
switch 1 .
The indicator lamp 2 comes on and
the mirror operates automatically.
S w i t c h i n g o f f
Press switch 1 .
The indicator lamp 2 switches off and
the mirror remains in its lightest state.
In order to guarantee optimum visibility
when manoeuvring the vehicle, the
mirror lightens automatically when re-
verse gear is engaged.
STEERING WHEEL ADJUSTMENT
The height and reach of the steering
wheel can be adjusted to adapt the
driving position to the size of the driver.
Adjustment
First, adjust the driver's seat to
the most suitable position.
W h e n s t a t i o n a r y
, pull the control
to unlock the steering wheel.
Adjust the height and reach.
Push the control to lock the
steering wheel.
A f t e r l o c k i n g , i f y o u p r e s s fi r m l y o n
the steering wheel, a slight click may
be heard.
As a safety precaution, the mirrors
must be adjusted to reduce the
"blind spot". A u t o m a t i c d a y / n i g h t m o d e l
System which automatically and
progressively changes between day
and night use.
As a safety precaution, it is impera-
tive that these operations are carried
out while the vehicle is stationary.
Page 63 of 279
73
V I S I B I L I T Y
V
Automatic lighting
The sidelamps and dipped head-
lamps are switched on automatically,
without any action on the part of the
driver, when a low level of external
light is detected or in certain cases of
activation of the windscreen wipers.
As soon as the brightness returns
t o a s u f fi c i e n t l e v e l o r a f t e r t h e w i n d -
screen wipers are switched off, the
lights are switched off automatically.
Activation
Turn ring A to the "AUTO" posi-
tion. The automatic lighting is ac-
companied by a message on the
multifunction screen.
Deactivation
Turn ring A to a position other
than "AUTO" . Deactivation is
accompanied by a message on
the multifunction screen. Linking with the automatic
"Guide-me-home" lighting
Association with the automatic light-
ing provides the "guide-me-home"
lighting with the following additional
options:
- selection of the lighting duration
for 15, 30 or 60 seconds in the
vehicle parameters on the mul-
t i f u n c t i o n s c r e e n c o n fi g u r a t i o n
menu (in the case of the mono-
chrome screen A, the duration is
fi x e d ) ,
- automatic activation of "guide-me- home" lighting when automatic
lighting is in operation.
Operating fault
In the event of a malfunction of
the brightness sensor, the lighting
comes on, a message appears on
the multifunction screen, accompa-
nied by an audible signal.
Consult a CITROËN dealer. In fog or snow, the brightness
s e n s o r m a y d e t e c t s u f fi c i e n t l i g h t .
Therefore, the lights will not come
on automatically.
Do not cover the brightness sen-
sor, linked with the rain sensor and
located in the centre of the wind-
screen behind the interior mirror;
the associated functions would no
longer be controlled. MANUAL ADJUSTMENT OF THE HEADLAMPS
To avoid dazzling other road users,
the height of the halogen bulb head-
lamps must be adjusted according
to the load in the vehicle.
To do this, turn the control, located
below the fascia to the right of the
driver, to the appropriate position:
0.
1 or 2 people in the front seats.
-.
3 people.
1.
5 people.
-.
Intermediate setting.
2.
5 people + maximum authorised
loads.
-.
Intermediate setting.
3.
Driver + maximum authorised loads.
Initial setting is position "0".
O n v e h i c l e s fi t t e d w i t h x e n o n b u l b s
the height of the headlamps is ad-
justed automatically.
Page 65 of 279
73
V I S I B I L I T Y
V
Automatic lighting
The sidelamps and dipped head-
lamps are switched on automatically,
without any action on the part of the
driver, when a low level of external
light is detected or in certain cases of
activation of the windscreen wipers.
As soon as the brightness returns
t o a s u f fi c i e n t l e v e l o r a f t e r t h e w i n d -
screen wipers are switched off, the
lights are switched off automatically.
Activation
Turn ring A to the "AUTO" posi-
tion. The automatic lighting is ac-
companied by a message on the
multifunction screen.
Deactivation
Turn ring A to a position other
than "AUTO" . Deactivation is
accompanied by a message on
the multifunction screen. Linking with the automatic
"Guide-me-home" lighting
Association with the automatic light-
ing provides the "guide-me-home"
lighting with the following additional
options:
- selection of the lighting duration
for 15, 30 or 60 seconds in the
vehicle parameters on the mul-
t i f u n c t i o n s c r e e n c o n fi g u r a t i o n
menu (in the case of the mono-
chrome screen A, the duration is
fi x e d ) ,
- automatic activation of "guide-me- home" lighting when automatic
lighting is in operation.
Operating fault
In the event of a malfunction of
the brightness sensor, the lighting
comes on, a message appears on
the multifunction screen, accompa-
nied by an audible signal.
Consult a CITROËN dealer. In fog or snow, the brightness
s e n s o r m a y d e t e c t s u f fi c i e n t l i g h t .
Therefore, the lights will not come
on automatically.
Do not cover the brightness sen-
sor, linked with the rain sensor and
located in the centre of the wind-
screen behind the interior mirror;
the associated functions would no
longer be controlled. MANUAL ADJUSTMENT OF THE HEADLAMPS
To avoid dazzling other road users,
the height of the halogen bulb head-
lamps must be adjusted according
to the load in the vehicle.
To do this, turn the control, located
below the fascia to the right of the
driver, to the appropriate position:
0.
1 or 2 people in the front seats.
-.
3 people.
1.
5 people.
-.
Intermediate setting.
2.
5 people + maximum authorised
loads.
-.
Intermediate setting.
3.
Driver + maximum authorised loads.
Initial setting is position "0".
O n v e h i c l e s fi t t e d w i t h x e n o n b u l b s
the height of the headlamps is ad-
justed automatically.
Page 66 of 279
74
V I S I B I L I T Y
V
AUTOMATIC ADJUSTMENT OF THE XENON HEADLAMPS
In order to avoid causing a nuisance
to other road users, this system cor-
rects the height of the xenon head-
lamps beam automatically and when
stationary, in relation to the load in
the vehicle. If a malfunction occurs,
this warning lamp is
displayed on the in-
strument panel, ac-
companied by an audible signal and a
message on the multifunction screen.
The system then places your head-
lamps in the lowest position.
If a malfunction occurs, do not
touch the xenon bulbs. Contact a
CITROËN dealer.
DIRECTIONAL LIGHTING
When the dipped or main beam
headlamps are on, this function ena-
bles the light beam to follow the di-
rection of the road.
The use of this function, coupled
with the xenon headlamps only,
considerably improves the quality of
your lighting when cornering.
with directional lighting
without directional lighting Programming
The function is activat-
ed or deactivated via
the multifunction screen
c o n fi g u r a t i o n m e n u .
Operating fault If a malfunction occurs, this
w a r n i n g l a m p fl a s h e s o n t h e
instrument panel, accompa-
nied by a message on the
multifunction screen.
Consult a CITROËN dealer.
When stationary or moving at very
low speed or when reverse gear is
engaged, the system is inactive.
The status of the system remains
in the memory when the ignition is
switched off.
O n v e h i c l e s fi t t e d w i t h d a y t i m e r u n -
ning lights, the function is activated
if the lighting stalk is in the "AUTO"
or "Dipped/main beam head-
lamps" position. In position "0" , the
function is not activated.
Page 103 of 279
100
VIII
S A F E T Y
Storing the seat belt
(3-door model)
Raise then lock part A , to retain the
seat belt buckle when it is unfas-
tened.
It is necessary to remove the seat
belt from the buckle retainer before
moving the seat to access the rear
seat positions.
As a safety measure, these opera-
tions should only be done when
stationary.
Seat belt height adjustment
(5-door model)
The correct positioning of the seat
belt reel is around mid-shoulder
level.
T o a d j u s t t h e b e l t , s q u e e z e t h e
control and slide it in the direction
required.
Unfastening
To unfasten the belt, press on
the red button in the buckle.
The belt retracts automatically when
not in use. Rear seat belts
E a c h r e a r s e a t i s fi t t e d w i t h a t h r e e -
point inertia reel seat belt with force
limiter.
Fastening
Pull the strap, then insert the
tongue in the buckle.
Check that the seat belt is fastened
correctly by pulling the strap.
Unfastening
Press the red button on the buckle.
Page 164 of 279
157
P R A C T I C A L I N F O R M A T I O N
ROOF BARS
T h e d e s i g n o f y o u r v e h i c l e r e q u i r e s
the use of roof bars and roof box-
e s t h a t a r e t e s t e d a n d a p p r o v e d b y
C I T R O Ë N , f o r y o u r s a f e t y a n d t o a v o i d
damage to the roof and tailgate
R e g a r d l e s s o f t h e t y p e o f l o a d i n g
equipment to be transported on the
r o o f ( r o o f b o x , b i c y c l e c a r r i e r , s k i
c a r r i e r . . . ) , i t i s i m p e r a t i v e t h a t y o u
a d d t r a n s v e r s e r o o f b a r s .
Recommendations
D i s t r i b u t e y o u r l o a d e v e n l y , a v o i d -
i n g o v e r l o a d i n g o n o n e s i d e .
Arrange the heaviest part of the
load as close as possible to the
r o o f .
A n c h o r t h e l o a d s e c u r e l y a n d
s i g n a l i f a n y p a r t o f i t i s o v e r -
h a n g i n g .
D r i v e g e n t l y , a s t h e v e h i c l e w i l l
be more liable to the effects of
s i d e w i n d s ( v e h i c l e s t a b i l i t y m a y
b e a l t e r e d ) .
Remove the roof bars as soon
a s t h e y a r e n o l o n g e r n e e d e d . Bicycle carrier
T h e i n s t a l l a t i o n o f a b i c y c l e c a r r i e r
on the tailgate of the 3-door model is
s t r i c t l y p r o h i b i t e d .
Maximum load that can be dis-
tributed on the roof bars (for a
loading height not exceeding
4 0 c m ; e x c e p t b i c y c l e c a r r i e r ) : 8 0 k g .
If the height exceeds 40 cm, adapt
y o u r s p e e d t o t h e p r o fi l e o f t h e r o a d
to avoid damaging the roof bars
a n d t h e fi x i n g s o n t h e r o o f .
Please refer to national legislation
i n o r d e r t o c o m p l y w i t h t h e r e g u l a -
tions concerning the transportation
of objects which are longer than
t h e v e h i c l e .
* A c c o r d i n g t o c o u n t r y .
VERY COLD CLIMATE SCREEN *
Removable device which prevents
the accumulation of snow at the ra-
d i a t o r c o o l i n g f a n .
Fitting
O f f e r u p t h e v e r y c o l d c l i m a t e
screen to the front of the lower
s e c t i o n o f t h e f r o n t b u m p e r .
P r e s s o n i t s p e r i p h e r y t o c l i p i t s
fi x i n g c l i p s o n e b y o n e .
Removal
Use a screwdriver as a lever to
u n c l i p e a c h fi x i n g c l i p i n t u r n .
D o n o t f o r g e t t o r e m o v e t h e v e r y
cold climate screen:
- when the outside temperature exceeds 10 °C,
- when towing,
- at speeds higher than 75 mph ( 1 2 0 k m / h ) .
Page 279 of 279
100
S A F E T Y
Storing the seat belt
(3-door model)
Raise then lock part A , to retain the
seat belt buckle when it is unfastened.
It is necessary to remove the seat
belt from the buckle retainer before
moving the seat to access the rear
seat positions.
As a safety measure, these opera-
tions should only be done when sta-
tionary. Rear seat belts
E a c h r e a r s e a t i s fi t t e d w i t h a t h r e e -
point inertia reel seat belt.
Fastening
Pull the strap, then insert the
tongue in the buckle.
Check that the seat belt is faste-
ned correctly by pulling the strap.
Unfastening
Press the red button on the buckle.
Seat belt height adjustment
(5-door model)
When correctly adjusted, the seat
belt shoulder strap falls over the
middle of the shoulder.
To adjust the belt, squeeze the
control and slide it in the direc-
tion required.
Unfastening
To unfasten the belt, press on
the red button in the buckle.
The belt retracts automatically when
not in use.