audio Citroen C4 2012 2.G User Guide

Page 50 of 332

1
MONITORING
48












Distance recorders

The total and trip distances are dis-
played for thirty seconds when the ig-
nition is switched off, when the driver's
door is opened and when the vehicle is
locked or unlocked.

Trip distance recorder
Total distance recorder
















Setting the time and the time
format in the instrument panel
without audio system

On the two-tone instrument panel with-
out audio system, to adjust the time,
use buttons A
and B
then carry out the
operations in the following order:


)
press buttons A
and B
simultane-
ously: the minutes fl ash,

)
press A
to increase the minutes or
B
to reduce the minutes,

)
press buttons A
and B
simultane-
ously: the hours fl ash,

)
press A
to increase the hours or B

to reduce the hours,

)
press buttons A
and B
simultane-
ously: 24 H or 12 H is displayed and
fl ashes,

)
press button A
or B
to change the
format,

)
press buttons A
and B
simultane-
ously to exit from time setting.


After approximately 30 seconds without any ac-
tion, the screen returns to the normal display.

Measures the total distance travelled by
the vehicle since its fi rst registration.

Measures a distance travelled since it
was reset to zero by the driver.


)
With the ignition on, press and hold
this button until zeros appear.

On the two-tone instrument panel with-
out audio system, to change the display
units, use buttons A
and B
then carry out
the operations in the following order:


)
press buttons A
and B
simultane-
ously for three seconds: km/h or
mph fl ashes,

)
press button A
or B
to change the
units,

)
press buttons A
and B
simultane-
ously to exit from setting units.
After approximately 30 seconds without
any action, the screen returns to the
normal display



Setting units in the instrument
panel without audio system

Setting the time and units in the
multifunction screen
The other instrument panels are associated
with an audio system and a multifunction
screen. Refer to the corresponding section
in "Audio and Telematics".

Page 52 of 332

1
MONITORING
50
In the instrument panel, you can change
the colour of its dials (button A
) indepen-
dently from that of the screens (button B
).
There are fi ve colour variants, from
white to blue.


)
press the appropriate button as
many times as needed to obtain the
desired colour.
This menu allows you to choose a fam-
ily of polyphonic sounds from the four
available. These sounds are grouped
together in a family and are adapted
to suit the situation and context (alert,
confi rmation, rejection, direction indica-
tors, lighting left on, key in ignition...).






Customising the instrument
panel colours





Customising the polyphonic
sounds
For safety reasons, these opera-
tions are only possible when sta-
tionary.
For the customisable colour
instrument panel with audio system


)
Press the "MENU"
button for ac-
cess to the main menu.

)

Select the "Personalisation-confi guration" menu and confi rm.

)
Select the "Choice of sounds" line
and confi rm.

)
Select the desired family of sounds
and confi rm.

)
Save the modifi cations by confi rming
"OK".
For the customisable colour
instrument panel associated with
the satellite navigation system


)
Press the thumb wheel for access
to the main menu.

)
Select the "Choice of sounds" line
and confi rm.

)
Select the desired family of sounds
and confi rm.

)
Save the modifi cations by confi rming
"OK".
For safety reasons, the driver
must only carry out these opera-
tion when stationary.

Page 53 of 332

2
MULTIFUNCTION SCREENS
51



















MONOCHROME SCREEN A

Displays in the screen

This displays the following information:


- time,

- date,

- ambient temperature (this fl ashes if
there is a risk of ice),

- openings check (if a door or the
boot is open),

- current audio source,

- trip computer (refer to the end of the
section).
Alert messages (e.g.: "Emission con-
trol system faulty") or information mes-
sages (e.g.: "Boot open") may appear
temporarily. These can be cleared by
pressing the "ESC"
button. From the control panel of your audio
system, you can press:


)
the "MENU"
button for access to
the main menu
,

)
the " 
" or " 
" buttons to scroll
through the items on the screen,

)
the " 
" or " 
" buttons to change a
setting value,

)
button A
to change the permanent
application (trip computer, audio
source...),

)
the "OK"
button to confi rm,
or

)
the "ESC"
button to abandon the
operation in progress.



Controls



)
Press the "MENU"
button for ac-
cess to the main menu
, then press
the " 
" or " 
" buttons to scroll
through the various menus:


- "RADIO",

- "MEDIA",

- "TRIP COMPUTER",

- "DATE AND TIME",

- "LANGUAGES",

- "VEHICLE PARAM",

)
Press the "OK"
button to select the
menu required.


Main menu


Radio/Media
With the audio system switched on,
once the "RADIO" or "MEDIA" menu
has been selected you can activate
or deactivate the functions associated
with use of the radio (RDS, Radio text)
or select the media play mode (normal,
random, repeat).
For more information on the "RADIO" or
"MEDIA" application, refer to the "Audio
and Telematics" section.

Page 55 of 332

2
MULTIFUNCTION SCREENS
53



















MONOCHROME SCREEN C

Displays in the screen

This displays the following information:


- time,

- date,

- ambient temperature (this fl ashes if
there is a risk of ice),

- openings check (if a doors or the
boot is open),

- parking sensor information,

- current audio source,

- telephone or Bluetooth system in-
formation,

- trip computer (refer to the end of the
section).
Warning messages (e.g.: "Emission
control system faulty") or information
messages (e.g.: "Automatic switch-
ing on of the headlamps activated")
may appear temporarily. These can be
cleared by pressing the "ESC"
button. From the control panel of your audio
system, you can press:


)
button A
to chooses between the
display of audio information in full
screen or the shared display of au-
dio and trip computer information,

)
the "MENU"
button for access to
the main menu
,

)
the " 
" or " 
" buttons to scroll
through the items on the screen,

)
the " 
" or " 
" buttons to change a
setting value,

)
the "OK"
button to confi rm,
or


)
the "ESC"
button to abandon the
operation in progress.



Controls



)
Press the "MENU"
button for ac-
cess to the main menu
:


- "Multimedia",

- "Telephone",

- "Trip computer",

- "Bluetooth connection",

- "Personalisation-confi guration",

)
Press the " 
" or " 
" button to se-
lect the menu required, then confi rm
by pressing the "OK"
button.



Main menu

"Multimedia" menu

With the audio system switched on,
this menu allows you to activate or de-
activate the functions associated with
use of the radio (RDS, DAB/FM auto
tracking, RadioText (TXT) display) or to
choose the media play mode (Normal,
Random, Random all, Repeat).
For more information on the "Multimedia"
application, refer to the "Audio and
Telematics" section.

Page 56 of 332

2
MULTIFUNCTION SCREENS
54

Defi ne the vehicle parameters
This menu allows you to activate or de-
activate the following equipment, clas-
sifi ed in different categories:


- "Access to the vehicle" (see the
"Access" section):



"Plip action" (Selective unlocking
of the driver's door),


"Unlocking boot only" (Selective
unlocking of the boot).



"Telephone" menu

With the audio system switched on, this
menu allows you to make a call or view
the various telephone directories.
For more information on the "Telephone"
application, refer to the "Audio and
Telematics" section. This menu allows you to view informa-
tion on the status of the vehicle.

Warning log
This summarises the status and warn-
ing messages for systems (active, not
active or faulty), displaying them in suc-
cession in the multifunction screen.


)
Press the "MENU"
button for ac-
cess to the main menu.

)
Press the arrows, then the "OK"

button to select the " Trip computer

" menu.

)
In the " Trip computer
" menu, select
the "Warning log" line and confi rm.




"Bluetooth connection"
menu
"Trip computer" menu

Wit the audio system on, this menu al-
lows a Bluetooth device (telephone,
media player) to be connected or dis-
connected and the connection mode to
be defi ned (hands-free, playing audio
fi les).
For more information on the "Bluetooth
connection" application, refer to the
"Audio and Telematics" section.


"Personalisation-
configuration" menu
This menu gives access to the following
functions:


- "Defi ne the vehicle parameters",

- "Choice of language",

- "Display confi guration",

- "Choice of sounds".

Page 58 of 332

2
MULTIFUNCTION SCREENS
56






















COLOUR SCREEN AND MAP

From the navigation system control
panel, to select one of the applications:


)
press the dedicated "RADIO"
,
"MUSIC"
, "NAV"
, "TRAFFIC"
,
"PHONE"
or "SETUP"
button for
access to the corresponding menu,

)
turn the dial A
to select a function,
an item in a list,

)
press button B
to confi rm the
selection,
or

)
press the "ESC"
button to abandon
the current operation and return to
the previous display.
For more information on these applica-
tions, refer to the "Audio and Telematics"
section.


Controls
"SETUP" menu




)
Press the "SETUP"
button for ac-
cess to its menu. You can choose
from the following functions:


- "Display confi guration",

- "Voice synthesis".



Display confi guration
This menu is used to set the bright-
ness of the screen, the screen colour
scheme and the date and time.

Voice synthesis
This menu is used to adjust the volume
for guidance messages and to select
the type of voice (male or female).
For safety reasons, confi gura-
tion of the multifunction screen
by the driver must only be done
when stationary.


Displays in the screen

It displays the following information au-
tomatically and directly:


- time,

- date,

- altitude,

- ambient temperature (the value dis-
played fl ashes if there is a risk of
ice),

- parking sensor information,

- audio functions,

- directory and telephone information,


- satellite navigation system information.

Page 62 of 332

2
MULTIFUNCTION SCREENS
60





Monochrome screen C

You can choose between two types of
display by pressing button A
:


-
the trip computer information appears
temporarily above the audio informa-
tion, displayed permanently in full
screen,
or

- the trip computer and audio infor-
mation both appear permanently in
a shared screen.
Information displays


- the current information tab
with:



the range,



the current fuel
consumption,


the Stop & Start time
counter,



- the trip "1"
tab with:



the distance travelled,


the average fuel
consumption,


the average speed,
for the fi rst trip.


- the trip "2"
tab with:



the distance travelled,


the average fuel
consumption,


the average speed,
for the second trip.





)
Press the button, located at the end
of the wiper stalk
, to display the
various trip computer tabs in suc-
cession.


)

When the trip required is displayed,
press the button on the end of the wiper
stalk for more than two seconds.

Trips "1"
and "2"
are independent but
their use is identical.
For example, trip "1"
can be used for
daily fi gures, and trip "2"
for monthly
fi gures.

Trip zero reset

Page 63 of 332

2
MULTIFUNCTION SCREENS
61





Central instrument panel screen
associated with the satellite
navigation system


- Display of instantaneous informa-
tion with:



the range,


the current fuel consumption,


Stop & Start time counter,



- Display of trip "1"
with:



the distance travelled,


the average fuel consumption,


the average speed,
for the fi rst trip.



- Display of trip "2"
with:



the distance travelled,


the average fuel consumption,


the average speed,
for the second trip.



)
Press the button, located at the end
of the wiper stalk

or

)
turn the thumb wheel, located on
the left of the steering wheel
,
to display the following information
in turn:



reminder of the speed,


instantaneous information,


trip "1"
,


trip "2"
,


information on the current audio
source,


black screen,


navigation-guidance messages.


Information displays

)
When the required trip is displayed,
press the thumb wheel located on
the left of the steering wheel
or the
button on the end of the wiper stalk

for more than two seconds.
Trips "1"
and "2"
are independent but
their use is identical.
For example, trip "1"
can be used for
daily fi gures and trip "2"
for monthly
fi gures.

Trip zero reset

Page 115 of 332

6
FITTINGS
11 3

















INTERIOR FITTINGS



1.
Grab handle


2.
Sun visor


(see details on a following page)

3.
Ticket/

map

holder


4.
Illuminated

glove box


(see details on a following page)

5.
Door

pocket

s


6.
Large open storage box
(without audio system)


or
Small storage box with fl ap
(with audio system)


7.
Small open storage box
(without audio system)


8.
USB port/Auxiliary socket


(see details on a following page)

9.
Cigarette

lighter/12 V accessory
socket


(see details on following pages)

10.
Portable ashtray


(see details on following pages)

11 .
Centre armrest with storage


(see details on a following page)

Page 117 of 332

6
FITTINGS
11 5








CIGARETTE LIGHTER/12 V
ACCESSORY SOCKET


)
To use the cigarette lighter, press
it in and wait a few seconds until it
pops out automatically.

)
To connect a 12 V accessory (max
power: 120 W), remove the ciga-
rette lighter and connect a suitable
adaptor.





















USB PORT/AUXILIARY SOCKET


The "AUX"
connection box, located in
the centre console, comprises an auxil-
iary JACK socket and/or a USB port.
It permits the connection of a portable
device, such as a digital audio player of
the iPod
® or USB memory stick type.
It reads certain audio fi le formats allow-
ing them to be heard via the vehicle's
speakers.
You can manage these fi les using the
steering mounted controls or the audio
system control panel and display them
on the multifunction screen.

For more information on the use of
this equipment, refer to the "Audio and
Telematics" section.
Connected to the USB port, the
portable device charges auto-
matically while in use.

LOWER CENTRE CONSOLE




1.
Storage pocket


2.
Cup holder


3.
Large open storage box


Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 ... 80 next >