coolant reservoir Citroen C4 2016 2.G Owner's Manual

228
C4-2_en_Chap07_infos-pratiques_ed02-2015
Screenwash / headlamp
wash fluid level
Specification of the fluid
To ensure optimum cleaning and to avoid freezing,   the   fluid   should   never   be   topped   up   or r

eplaced   by   plain   water.
In wintry conditions, the use of a fluid
with
  an   ethyl   alcohol   or   methanol   base   is  
re

commended.
To
 
check
 
the
 
level
 
or
 
top
 
up
 
the
 
f

luid
 
on
 
vehicle
 
fitted
 
with
 
headlamp
 
w

ashers,
 
immobilise
 
the
 
vehicle
 
and
 
s

witch
 
of
 
the
 
engine.
F

O

pen the bonnet and secure it with the
st ay.
F
 
O

pen
 
the
 
screenwash
 
reservoir
 
filler
 
cap.
F
 
T

ake
 
and
 
pinch
 
the
 
level
 
gauge
 
to
 
block
 
its
 
b

reather.
F
 
R

emove
 
the
 
gauge
 
completely
 
from
 
t

he reservoir to read the level in the
transparent
 s

ection.
Coolant level
The coolant level should be close
to   the   "MA X"   mark   but   should   never  
e

xceed   it.
Fluid specification
The coolant must conform to the manufacturer's r ecommendations.
The cooling fan may star t after
switching off the engine: take care
with articles and clothing that might
be caught by the fan blades.
When
  the   engine   is   warm,   the   temperature   of  
t

he   coolant   is   regulated   by   the   fan.
In   addition,   as   the   cooling   system   is  
p

ressurised, wait at least one hour after
switching   off   the   engine   before   carrying   out  
any   work.
To   avoid   any   risk   of   scalding,   unscrew   the   cap  
b

y   two   turns   to   allow   the   pressure   to   drop.  
W

hen   the   pressure   has   dropped,   remove   the  
c

ap   and   top   up   the   level. F  
T
op   up   if   necessary.
F
R
efit the filler cap to the reservoir and
close   the   bonnet.
Practical information