ESP CITROEN C4 DAG 2006 Owners Manual

IN BRIEF
I13
W a R N I N g l a m p s
Depollution system
warning lamp
If it flashes or lights up
while you are driving, this
indicates a depollution system
operating fault.
Urgently consult a CITROËN
Dealer. SERVICE warning
lamp
This warning lamp
remains on for a serious
fault.
Contact a CITROËN dealer as
soon as possible
The lamp stays on only for a short
time for a minor fault.
Contact a CITROËN dealer if nec-
essary.
To learn the origin of the corre-
sponding alert message, refer to
the «log of alerts» (see chapter II)
or your NaVIDRIVE instructions. Child safety warning
lamp
at each activation, either
manual or via the window
control panel, this lamp lights up
and then goes out approx. 10 sec-
onds after the engine is started.
ESP/ASR warning lamp
In operation
When either the Esp or
asR system is brought into
operation, the ESP/ASR warning
lamp flashes.
In the event of a problem
When the vehicle is moving, the
lighting of the ESP/ASR warning
lamp indicates that the system is
malfunctioning.
Contact a CITROËN dealer.
Deactivation
Illumination of the Esp/asR warn -
ing lamp and of the Esp control,
means that the system is deacti-
vated.
see «Esp». Low fuel level warning
lamp
When the fuel tank is full,
all the indicator bars are
illuminated.
If the fuel low warning lamp comes
on, there remain around 7 litres of
fuel in the tank and 2 or 3 bars will
flash in the instrument panel.
If the last bar disappears, there
are only around 2 litres of fuel in
the tank.
“Foot-on-brake”
starting warning lamp
for (6 speed) Electronic
Gearbox System
During the engine starting phase,
this flashes if you are not pressing
the brake pedal.
see “(6 speed) Electronic gearbox
system”.
This warning lamp may flash in the
instrument panel to remind you to
apply the brake when engaging
reverse gear.

A
II
72 SAFETY RECOMMENDATIONS
The Esp system offers increased
driving safety but is not in place to
encourage the driver to take addi-
tional risks or to drive at excessive
speeds.
The functioning of this system is
subject to compliance with the
manufacturer’s recommendations
on wheels (tyres and rims), brake
parts and electronic components,
as well as with CITROËN’s assem-
bly and repair procedures.
after any collision, have this
system checked by a CITROËN
dealer.
Electronic Stability Programme (ESP) and Traction Control (ASR)
These systems are closely connected to the aBs and additional to i
t. In
the event of a loss of control of the vehicle by the driver, the ESP system
acts automatically on one or more brakes and also on the engine to bring
the vehicle back on trajectory. The ASR system optimises traction and
prevents wheel spin by acting on the brakes of the driving whe els. It also
improves steering stability during acceleration.
Operation
When either the Esp or asR system is brought into operation,
the ESP/ASR warning lamp flashes.
Deactivation
In exceptional conditions (vehicle stuck in snow, soft ground, e tc.) it may
prove useful to deactivate the Esp/asR system to allow the wheels to spin
and thus regain traction.
- press on control A, the ESP/ASR warning lamp and the control light up.
The ESP/ASR systems are no longer active.
The Esp/asR systems will activate again:
- Automatically after the ignition has been switched off.
- Automatically when you drive at above approx. 30 mph
(except 2.0i 16V 180hp engine).
- Manually with another press on control
A.
Operational anomaly
If there is a system malfunction, the ESP/ASR warning lamp comes on.
Contact CITROËN to have the system checked.
E l E C T R O N I C s T a B I l I T y p R O g R a m m E

66
D E s C R I p T I O N O F T H E C O N T R O l s
V O I C E
yo u c a n o p e r a t e N av i d r i ve u s i n g y o u r voice.NaviDr ive lets you ac c ess c er tain func -tions by pronouncing the c or responding voice label:Using pre-recorded words and expres-sions, for example: “Radio”, “Help”.Using a label recorded by the user.To associate a voice label to a directory fi le, select this fi le.Record a voice label for this fi le (e.g. “Offi ce” or “Home”).

414141
IV
DBC
A
C D C H a N g E R s O U R C E
( a C C O R D I N g T O E Q U I p m E N T )
Hold down one of the buttons 1 to 5 on the alphanumeric keypad to choose the CD that you wish to play back.
1. press on button C or rotate the control on the steering wheel D upwards to listen to the next CD.2. press on button B or rotate the control on the steering wheel D downwards to listen to the previous CD.Note: playback of the star t of the CD is automatic.after each change of source, on return to CD changer source, playback will resume at the same point where it had been interrupted.
WHAT IS THE CD CHANGER ?SELECTING A CD
P LAY BACK THE NEXT /PREVIOUS CD
or
CD CHANGER SOURCE
This device can accommodate 5 discs.
I NSERTING CDS INTO THE MAGAZINE
Insert the CDs printed sur face to the left.
Note:Each compartment takes one disc only.The CD changer will not operate if discs are inserted the wrong way up.
R EMOVING DISCS
To remove a CD, give a long press on the corresponding button A.
S ELECTING CD CHANGER SOURCE
press successively on button 24, until the desired source is obtained.

4242
V
T E l E p H O N E
g E N E R a l
The telephone function consists of a gsm telephone incorporated in NaviDrive.It has a “Hands-free” function, provided by a microphone located in the front interior lamp and controls at the steering wheel for accessing the majority of operations.
As wit h any mobil e t el ephone, t his t el ep hon e op er at e s t hanks to b ot h cellular and terrestrial networks. For this reason, it cannot guarantee a con-nection in all cases.
Do not allow yourself to be distracted while you are driving.I t i s e s s e n t i a l t o c o m p l y w i t h t h e national legislation in force.Stop the vehicle if you wish to pursue a telephone conversation or proceed w i t h c e r t a i n a c t i o n s (c o m p o si n g a number for example).
apart from during a communication, it indi-cates to you:the presence of voice messages or text messages (s m s) that have not been read,the communication time since the last update,the level of reception of the networks.
During a communication, it indicates to you:the time elapsed since the star t of the communication,the number (provided the option and the service are available),the name of your correspondant (if this is recorded in the directory),the level of reception of the network.