Citroen C4 DAG 2008.5 1.G Owner's Manual

18
07
1
3
5
4
2
1
2
The services available depend on the network, the SIM card and the compatibility of the Bluetooth equipment used. Refer to your telephone's manual an d your operator to check which services you have access to. A list of mobile telephones which offer the best range of services is available from dealers.
BLUETOOTH TELEPHONE
CONNECTING A TELEPHONE
For safety reasons and because they require prolon ged attention on For safety reasons and because they require prolonged attention on the part of the driver, the operations for pairing the Bluetooth mobile the part of the driver, the operations for pairing the Bluetooth mobile telephone to the hands-free system of the MyWay mus t must be carried out with the vehicle stationary and the ignition on.
Activate the telephone's Bluetooth function. The last telephone connected is reconnected automatically.
Select the TELEPHONE MENU function and press the dial to confi rm.
TELEPHONE MENU
Enter the authentication code on the telephone. The code to be entered is displayed on the screen.
To change the telephone connected, press the PHONE button, then select TELEPHONE MENU and pressthe dial to confi rm.
Once the telephone has been connected, MyWay can s can synchronise the address book and the call list. This synchronis ation ation may take a few minutes.
Select CONNECT PHONE. Select the telephone and press to confi rm. The list of telephones connected previously (4 max imum) appears The list of telephones connected previously (4 maximum) appears on the multifunction display. Select the telephone requir required for a new connection.
Press the PHONE button.
For a fi rst connection, select SEARCH PHONE and press the dial to confi rm. Then select the name of the telephone.
SEARCH PHONE
CONNECT PHONE

19
2
3
11
2
3
Press the end of the steering wheel control to accept the call or end the call in progress.
Select the YES tab to accept or NO to refuse and confi rm by pressing the dial.
RECEIVING A CALL MAKING A CALL
An incoming call is announced by a ring and a superimposed display An incoming call is announced by a ring and a superimposed display on the multifunction display.
YES
To hang up, press the PHONE button or press the dial and select END CALL then confi rm by pressing the dial.
END CALL
Press the PHONE button.
Press the end of the steering wheel control for more than two Press the end of the steering wheel control for more than two seconds to gain access to the address book.
It is also possible to select a number from the address bress book. You can select DIAL FROM ADDRESS BOOK. MyWay permits the re cording select DIAL FROM ADDRESS BOOK. MyWay permits the recording of up to 4 000 entries.
Select DIAL NUMBER, then dial the telephone number using the virtual keypad.
Select the TELEPHONE MENU function and press the dial to confi rm.
DIAL NUMBER
TELEPHONE MENU
The list of the last 20 calls made and received in the vehhe vehicle appears under TELEPHONE MENU. You can select a number and p ress the under TELEPHONE MENU. You can select a number and press the dial to make the call.
NO

20
08
5
6
1
2
3
4
CONFIGURATION
SETTING THE DATE AND TIME
This function provides access to the options: SYSTEM LANGUAGE, DATE AND TIME, DISPLAY (BRIGHTNESS, COLOUR, MAP COLOUR), VEHICLE P ARAMETERS, UNITS, SYSTEM PARAMETERS.
Set the parameters one by one using the direction arrows and confi rm by means of the dial.
Select the DATE FORMAT function and press the dial to confi rm.
Select the SET DATE AND TIME function and press the dial to confi rm.
Confi rm the format required using the dial. Pressing the SET UP button for more than 2 seconds permits access to: Pressing the SET UP button for more than 2 seconds permits access to:
Press the SET UP button.
Confi rm the format required using the dial. Select the TIME FORMAT function and press the dial to confi rm.
SET DATE AND TIME
Select the DATE AND TIME function and press the dial to confi rm.
DESCRIPTION OF THE UNIT
GPS COVERAGE
DEMO MODE
DATE AND TIME

21
1
TRIP COMPUTER/VEHICLE PARAMETERS
VEHICLE DIAGNOSTICS
- The "vehicle" tab: The range, the current consumption and the distance remaining. - The "1" (route 1) tab with: The average speed, the average consumption and the distance travelled calculated over route "1". - The "2" (route 2) tab with the same functions for a second route.
Range: displays the distance which can travelled with the remaining displays the distance which can travelled with the remaining fuel detected in the tank, in relation to the average consumption over fuel detected in the tank, in relation to the average consumption over the last few miles (kilometres). This displayed value may vary signifi cantly follow ing a change in the This displayed value may vary signifi cantly following a change in the vehicle speed or the relief of the route. When the range falls below 20 miles (30 km), dashe s are displayed. When the range falls below 20 miles (30 km), dashes are displayed. After fi lling with at least 5 litres of fuel, the range is recalculated and After fi lling with at least 5 litres of fuel, the range is recalculated and is displayed when it exceeds 60 miles (100 km). If, whilst driving, dashes are displayed continuou sly in place of the If, whilst driving, dashes are displayed continuously in place of the digits, contact a CITROËN dealer. If, whilst driving, dashes are displayed continuously in place of the If, whilst driving, dashes are displayed continuously in place of the
Current consumption: only calculated and displayed aayed above 20 mph (30 km/h).
Average consumption: this is the average quantity of fuel this is the average quantity of fuel consumed since the last trip computer zero reset.
Distance travelled: calculated since the last trip compucomputer zero reset.
Distance remaining to the destination: calculated wited with reference to the fi nal destination, entered by the user. If guidance is activated, to the fi nal destination, entered by the user. If guidance is activated, the navigation system calculates it as a current va lue.
Average speed: this is the average speed calculated since the last this is the average speed calculated since the last trip computer zero reset (ignition on).
Each press of the button at the end of the wipers stalk displays the Each press of the button at the end of the wipers stalk displays the various trip computer data in succession, according to the display. various trip computer data in succession, according to the display.
A FEW DEFINITIONS

22
09
4
1
23
51
2
1
23
4
53
4
1
C4 STEERING WHEEL CONTROLS
STEERING WHEEL CONTROLS
1. Volume increase.
2. Volume decrease.
3. Successive presses mute/restore the sound.
4. Rotation - associated with a pop-up. Radio - access the 6 stored stations: higher or previous. Music players: previous/next track.
5. Radio: next/previous station. Music players: next track.
1. Press. Repeat the current spoken navigation instruction.
2. Short press to make a telephone call. Pick up/Hang up. Access the telephone menu. Display the call list. Long press to reject an incoming call.
3. Personalisation Short press to confi rm the choice made using the d ial.
4. Rotation. Movement on the call list in the phone book. Personalisation selection.
1. Short press: provides access to the menu according to the display on the screen. Short press: provides access to the menu according to the Short press: provides access to the menu according to the
2. Successive presses: provides access according to the current display on the screen. Successive presses: provides access according to the Successive presses: provides access according to the
MAP/NAV (if navigation is in progress), current display on the screen. urrent display
TEL (if a conversation is in progress), MAP/NAV (if navigation is in progress), MAP/NAV (if navigation is in progress),
RADIO or MEDIA in progress, Trip computer. TEL (if a conversation is in progress), TEL (if a conversation is in progress),
Long press: switch to black screen - Dark (night driving). RADIO or MEDIA in progress, Trip computer. RADIO or MEDIA in progress, Trip computer.
Touching a control restores the display. Long press: switch to black screen - Dark (night driving). Long press: switch to black screen - Dark (night driving).
3. ESC: abandon the current operation. 4. Rotation: selects the access to the short-cut menus according to the current display. 5. Confi rms the choice displayed on the screen.

23
09
LISTMENU
4
3
5
6
7
8
9
10
11
1
2
C5 STEERING WHEEL CONTROLS
STEERING WHEEL CONTROLS
1. Successive presses: "Black Panel" mode - black screen (night driving).
2. Short press to make a telephone call. Pick up/Hang up. Access the telephone menu. Display the call list. Long press to reject an incoming call.
3. Rotation: provides access to the short-cut menus a
ccording to the display on the screen. Short press: confi rm the choice displayed on the s creen. Long press: return to the main menu.
4. Short press: abandon the current operation. Reject an incoming call. Long press: return to the initial display.
5. Menu: provides access to the main menu.
6. VOL +: volume increase.
7. VOL -: volume decrease.
8. Successive presses: mute/restore sound.
9. Short press: Radio: higher frequency. Music players: next track. Long press for fast play.
10. Short press: Radio: lower frequency. Music players: previous track. Long press for fast play.
11. Short press: display the list of radio frequencies available or the list of tracks, albums, directories. Long press: update the list of stations received.
Press: repeat the current navigation instruction.
Successive presses: selection of the type of information present on the screen.

24
10
1
2
3
1
2
4
1
2
3
4
3
3
3
3
2
2
2
2
4
4
4
4
4
3
3
3
3
3
2
3
2
2
3
3
3
4
4
4
4
4
3
3
12332 "RADIO" MENU
MAIN FUNCTION CHOICE A choice A1 choice A2 CHOICE B...
DISPLAY FLOW CHARTS
"MUSIC" MENU
"TRAFFIC" MENU
MESSAGES ON ROUTE
ONLY WARNINGS ON ROUTE
ALL WARNING MESSAGES
ALL MESSAGES
GEOGRAPHICAL FILTER
none
within 2 miles (3 km)
within 3 miles (5 km)
within 6 miles (10 km)
within 30 miles (50 km)
SELECT MUSIC
SOUND SETTINGS
balance/fader
bass/treble
equalizer
none
classical
jazz
rock/pop
techno
vocal
loudness
initialise sound settings
WAVEBAND
FM
AM
MANUAL TUNE
SOUND SETTINGS
balance/fader
bass/treble
equalizer
none
classical
jazz
rock/pop
techno
vocal
loudness
initialise sound settings

25
1
2
4
2
3
4
2
3
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
24
4
4
3
3
3
3
4
4
4
2
3
3
3
3
3
3
3
3
4
4
2
4
4
4
4
4
route type
fast route
short route
optimised route
STOPOVERS
add stopover
address input
navigate HOME
choose from address book
choose from last destinations
rearrange route
replace stopover
delete stopover
recalculate
fast route
short route
optimised route
"NAVIGATION" MENU
ABORT/RESUME GUIDANCE
DESTINATION INPUT
address input
country
city
street
number
start route guidance
post code
add to address book
intersection
city district
geo position
MAP
navigate HOME
choose from address book
choose from last destinations
POI SEARCH
POI nearby
POI near destination
POI in city
POI in country
POI near route
SETTINGS
route dynamics
traffi c independent
semi-dynamic
avoidance criteria
avoid motorways
avoid toll roads
avoid ferries
recalculate

26
1
2
3
4
1
2
3
4
2
3
4
2
2
2
3
4
4
4
4
2
3
3
3
2
3
3
3
3
3
3
3
3
3
3
3
2
3
4
4
4
4
4
3
2
4
3
2
4
4
4
4
3
4
4
4
3
3
3
"TELEPHONE" MENU SETUP
DIAL NUMBER
DIAL FROM ADDRESS BOOK
CALL LIST
CONNECT PHONE
search phone
phones connected
disconnect phone
rename phone
delete pairing
delete all pairings
show details
SETTINGS
select ring tone
phone/ring tone volume
enter mailbox number
SYSTEM LANGUAGE
deutsch
english
espanol
français
italiano
nederlands
polski
portuguese
DATE AND TIME
set date and time
date format
time format
DISPLAY
brightness
colour
pop titanium
toffee
blue steel
technogrey
dark blue
MAP colour
day mode for MAP
night mode for MAP
auto. day/night for MAP
VEHICLE PARAMETERS
vehicle information
alert log
status of functions
UNITS
temperature
celsius
fahrenheit
Distance
km and l/100
km and km/l
miles (mi) and MPG
SYSTEM PARAMETERS
factory reset
software version
automatic scrolling

27
sound quality between the different audio sources (radio, CD, CD changer...).
Check that the audio settings (Volume, Bass, Treble, Ambience, Loudness) are adapted to the sources listened to. It is advisable to set the AUDIO functions (Bass, Treble, Front-Rear Balance, Left-Right Balance) to the middle position, select the musical ambience "None" and set the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode.
For optimum sound quality, the audio settings (Volume, Bass, Treble, Ambience, Loudness) can be adapted to the different sound sources, which may result in audible differences when changing source (radio, CD, CD changer...).
The CD is ejected automatically or is not played by the player.
- Check that the CD is inserted in the player the right way up. - Check the condition of the CD: the CD cannot be played if it is too damaged. - Check the content in the case of a recorded CD: consult the advice in the Audio section. - The audio equipment's CD player does not play DVDs. - Due to inadequate quality, certain recorded CDs will not be played by the audio system. - The CD changer does not play MP3 CDs.
The CD is inserted upside down, is unplayable, doe s not contain any audio data or contains an audio format which the player cannot play.
The CD is protected by an anti-pirating protection system which is not recognised by the audio equipment.
The CD player sound is poor. Insert good quality CDs and store them in suitable conditions. The CD used is scratched or of poor quality.
The audio equipment settings (bass, treble, ambien ces) are unsuitable. Set the treble or bass level to 0, without selecting an ambience.
The table below groups together the answers to the most frequently asked questions concerning the MyW ay.
QUESTION SOLUTIONRESPONSE
FREQUENTLY ASKED QUESTIONS