display Citroen C4 DAG 2014.5 2.G User Guide

29
C4-2_en_Chap01_controle-de-marche_ed01-2014
Engine oil level indicator*
The level read  will  only  be  cor -
rect if the vehicle is on level
ground
 
and
 
the
 
engine
 
has
 
been
 
of

f   for   more   than   30   minutes.Oil level correct
This
 
is
 
indicated
 
by
 
the
 
flashing
 
of
 
"
OIL"
or  
the
 
display
 
of
 
a
 
message,
 
accompa
-
nied  
by
 
the
 
service
 
warning
 
lamp
 
and
 
an

  audible   signal.
If  
the
 
low
 
oil
 
level
 
is
 
confirmed
 
by
 
a
 
check

 
using
 
the
 
dipstick,
 
the
 
level
 
must
 
be

 
topped
 
up
 
to
 
avoid
 
damage
 
to
 
the
 
engine.
Refer

  to   the   "Checking   levels"   section.Oil level indicator fault
In the event of a fault with the electric
indicator,  
the
 
oil
 
level
 
is
 
no
 
longer
 
moni
-
tored.
If  
the
 
system
 
is
 
faulty
,  
you
 
must
 
check
 
the

 
engine
 
oil
 
level
 
using
 
the
 
manual
 
dipstick

  located   under   the   bonnet.
Refer   to   the   "Checking   levels"   section.
Oil level incorrect
This  
is
 
signalled
 
by
 
the
 
flashing
 
of
 

"
OIL--"   or   the   display   of   a   message.
Contact  
a
 
CITROËN
 
dealer
 
or
 
a
 
quali
-
fied   workshop.
On
 
versions
 
fitted
 
with
 
an
 
electric
 
oil
 
level

 
indicator
,  
the
 
state
 
of
 
the
 
engine
 
oil

 
level
 
is
 
displayed
 
in
 
the
 
instrument
 
panel

 
for
 
a
 
few
 
seconds,
 
at
 
the
 
same
 
time

 
as   the   servicing   information.
*
 
Depending   on   version.
1
MonIToRInG

30 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Service indicator
System that informs  the  driver  when  the  next
 service  is  due,  in  accordance  with  
the

  manufacturer's   service   schedule.
The
 
point
 
at
 
which
 
the
 
service
 
is
 
due
 
is
 
calculated

 
from
 
the
 
last
 
service
 
indica
-
tor
 
zero
 
reset,
 
according
 
to
 
the
 
distance
 
covered

 
and
 
the
 
time
 
elapsed
 
since
 
the
 
last

  service.
For
b lueH d i d iesel versions, the level
of
 
deterioration
 
of
 
the
 
engine
 
oil
 
may
 
also

 
be
 
taken
 
into
 
account,
 
depending
 
on

  the   country   of   sale.
More than 1800 miles (3000 km)
remain before the next service is due
When the ignition  is  switched  on,  no  service
 information  appears  in  the  in -
strument
  panel   central   screen.
Between 600 miles (1 000 km) and
1800 miles (3 000 km) remain before
the next service is due
For a  few  seconds  after  the  ignition  is  switched
 on,  the  spanner  symbolising  
the

 
service
 
operations
 
comes
 
on.
 
The
 
distance

 
recorder
 
display
 
line
 
or
 
a
 
spe
-
cific
 
message
 
in
 
the
 
instrument
 
panel
 
central

 
screen
 
indicates
 
the
 
distance
 
re
-
maining
  before   the   next   service   is   due.
For example:
 
1
 
700
 
miles
 
(2
 
800
 
km)
 
remain

  before   the   next   service   is   due.
For
 
a
 
few
 
seconds
 
after
 
the
 
ignition
 
is
 
switched

  on,   the   screen   indicates:
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560 miles  (900  km)  remain  before
  the   next   service   is   due.
For
 
a
 
few
 
seconds
 
after
 
the
 
ignition
 
is
 
switched

  on,   the   screen   indicates:
A
 few

 
seconds

 
after

 
the

 
ignition

 
is

 
switched

 
on,

 
the spanner goes off

; the
distance
 
recorder

 
resumes

 
its

 
normal

 
operation.

 
The

 
screen

 
then

 
indicates

 
the

 
total
 
and
 
trip
 
distances. A
 few

 
seconds
 
after
 
the
 
ignition
 
is
 
switched

 
on,
 
the
 
distance
 
recorder
 
resumes

 
its
 
normal
 
operation.
 
The
spanner remains on

 
to
 
indicate
 
that
 
a
 
service

  must   be   carried   out   soon.
1
MONITORING

31 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Service overdue
For 
a
 
few
 
seconds
 
after
 
the
 
ignition
 
is
 
switched

 
on,
 
the
spanner flashes to
indicate
 
that
 
the
 
service
 
must
 
be
 
car
-
ried
  out   as   soon   as   possible.
Example:
 
the
 
service
 
is
 
overdue
 
by
 
180

  miles   (300   km).
For
 
a
 
few
 
seconds
 
after
 
the
 
ignition
 
is
 
switched

  on,   the   screen   indicates:
A
 few

 
seconds
 
after
 
the
 
ignition
 
is
 
switched

 
on,
 
the
 
distance
 
recorder
 
re
-
sumes
 
its
 
normal
 
operation.
 
The span
-
ner remains on. The
 spanner  comes  on  if  you  
have

 
exceeded
 
the
 
specified
 
time

 
interval
 
since
 
the
 
last
 
ser
-
vice,
 
as
 
indicated
 
in
 
the
 
manu
-
facturer's
  service   schedule.
For
b lueH d i d iesel versions,
the
 
spanner
 
may
 
also
 
come
 
on
 
before

 
the
 
normal
 
service
 
point,
 
according

 
to
 
the
 
level
 
of
 
dete
-
rioration
 
of
 
the
 
engine
 
oil,
 
which
 
depends

 
on
 
the
 
driving
 
condi
-
tions
  of   the   vehicle.
Service indicator zero reset This operation cannot be car-
ried
 
out
 
while
 
a
 
reminder
 
of
 
the
 
servicing

 
information
 
is
 
being
 
displayed.
Following

 
this
 
operation,
 
if
 
you
 
wish

 
to
 
disconnect
 
the
 
battery
,  
lock

 
the
 
vehicle
 
and
 
wait
 
at
 
least
 
five

 
minutes
 
for
 
the
 
zero
 
reset
 
to
 
be

  registered.
Recalling the service information
You
 
can
 
recall
 
the
 
service
 
information
 
at

  any   time.
F
 
Briefly
 
press
 
the
 
".../000"
 
trip
 
dis
-
tance
  recorder   zero   reset   button.
 The

 
service
 
information
 
is
 
displayed
 
for

  a   few   seconds.
After
 
each
 
service,
 
the
 
service
 
indicator
 
must

  be   reset   to   zero.
If
 
you
 
have
 
carried
 
out
 
the
 
service
 
on
 
your

  vehicle   yourself:
F
 
switch
  off   the   ignition,
F
 
press
 
and
 
hold
 
the
 
".../000"
 
trip
 
dis
-
tance
  recorder   zero   reset   button,
F
 
switch
 
on
 
the
 
ignition;
 
the
 
distance
 
recorder

 
display
 
begins
 
a
 
count
-
down,
F
 
when
 
the
 
screen
 
indicates
 
"=/0"

and
 
the
 
spanner
 
disappears,
 
re
-
lease
  the   button.
For
b lueH d i d iesel versions, this alert
is
 
also
 
accompanied
 
by
 
the
 
fixed
 
illu-
mination

 
of
 
the
 
Service
 
warning
 
lamp
 
when

  the   ignition   is   switched   on.
1
MONITORING

32 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Distance recorders
The total and  trip  distances  are  dis -
played  for  thirty  seconds  when  the  ig -
nition
 
is
 
switched
 
of
f,  
when
 
the
 
driver's
 
door

 
is
 
opened
 
and
 
when
 
the
 
vehicle
 
is
 
locked

  or   unlocked.
Trip distance recorder Total distance recorder
Setting the time and the time
format in the instrument panel
without audio system
On the  two-tone  instrument  panel  with -
out  audio  system,  to  adjust  the  time,  
use buttons

A  
and
 
B
then carry out the
operations
  in   the   following   order:
F

press buttons
A  
and
 
B
 
simultane
-
ously:
  the   minutes   flash,
F
press A
 
to
 
increase
 
the
 
minutes
 
or
 
B

  to   reduce   the   minutes,
F

press buttons
A  
and
 
B
 
simultane
-
ously:
  the   hours   flash,
F
press A to increase the hours or B
to
  reduce   the   hours,
F

press buttons
A  
and
 
B
 
simultane
-
ously:
 
24
 
H
 
or
 
12
 
H
 
is
 
displayed
 
and
 
flashes,
F


press button
A or B  
to
 
change
 
the
 
format,
F


press buttons
A  
and
 
B
 
simultane
-
ously
  to   exit   from   time   setting.
After approximately 30  seconds  without  any  ac -
tion,   the   screen   returns   to   the   normal   display.
Measures the total  distance  travelled  by
 the  vehicle  since  its  first  registration.
Measures
 
the
 
distance
 
travelled
 
since
 
it
 
was

  last   reset   to   zero   by   the   driver.
F
 
With
 
the
 
ignition
 
on,
 
press
 
and
 
hold
 
this

  button   until   zeros   appear. On
 
the
 
two-tone
 
instrument
 
panel
 
with
-
out  
audio
 
system,
 
to
 
change
 
the
 
display
 
units, use buttons

A  
and
 
B
then carry
out   the   operations   in   the   following   order:
F
press buttons
A  
and
 
B
 
simultane
-
ously  
for
 
three
 
seconds:
 
km/h
 
or
 
mph

  flashes,
F
press button
A or B  
to
 
change
 
the
 
units,
F

press buttons
A  
and
 
B
 
simultane
-
ously   to   exit   from   setting   units.
After  approximately  30  seconds  without  any action, the screen returns to the
normal
  display
Setting units in the instrument
panel without audio system
Setting the time and units in the
multifunction screen
The other instrument  panels  are  as -
sociated  with  an  audio  system  and  a  
multifunction

 
screen.
 
Refer
 
to
 
the
 
cor
-
responding
  screens.
1
MONITORING

22
35 
C4-2_en_Chap02_ecran-multifonction_ed01-2014
MONOCHROME SCREEN A
Displays in the screen
This displays the following information:
-  
time,
-

 
date,
-

 
ambient
 
temperature
 
(this
 
flashes
 
if
 
there

  is   a   risk   of   ice),
-
 
current
  audio   source,
-
 
trip
 
computer
 
(refer
 
to
 
the
 
end
 
of
 
the
 
section),
-

 
alert
  messages,
-
 
settings
 
menus
 
for
 
the
 
screen
 
and
 
the

  vehicle   equipment. From
 
the
 
control
 
panel
 
of
 
your
 
audio
 system,
  you   can   press:
F the "MENU" button for access to
the main menu,
F

the "
5" or "6" buttons to scroll
through
  the   items   on   the   screen,
F

the
"7" or "8"  
buttons
 
to
 
change
 
a
 
setting

  value,
F
button A
 
to
 
change
 
the
 
permanent
 
application

 
(trip
 
computer
,  
audio
 
source...),
F

the "OK"
  button   to   confirm,
or
F

the "Back"
 
button
 
to
 
abandon
 
the
 
operation

  in   progress.
Controls
F Press the "MENU" button for ac-
cess to the main menu, then press
the "5" or "6" buttons to scroll
through
  the   various   menus:
-
 
"RADIO",
-

 
"MEDIA",
-

 
"TRIP 
COMPUTER",
-
 
"DA
TE  
AND
 
TIME",
-

 
"LANGUAGES",
-

 
"VEHICLE
  PARAM",
F

Press
the "OK" button to select the
menu
  required.
Main menu
Radio / Media
With 
the
 
audio
 
system
 
switched
 
on,
 
once

 
the
 
"RADIO"
 
or
 
"MEDIA"
 
menu
 
has

 
been
 
selected
 
you
 
can
 
activate
 
or

 
deactivate
 
the
 
functions
 
associated
 
with

 
use
 
of
 
the
 
radio
 
(RDS,
 
Radio
 
text)
 
or

 
select
 
the
 
media
 
play
 
mode
 
(normal,
 
random,

  repeat).
For
 
more
 
information
 
on
 
the
 
"RADIO"
 
or
 
"MEDIA"

 
application,
 
refer
 
to
 
the
 
"Audio
 
and

 
T
elematics"   section.
MULTIFUNCTION SCREENS

22
36 
C4-2_en_Chap02_ecran-multifonction_ed01-2014
Once the "TRIP COMPUTER"  menu  has
 been  selected,  you  can  start  diag -
nostics
 
of
 
the
 
status
 
of
 
the
 
equipment
 
(active,

  not   active,   faulty).
Trip computer Date and time
Once  
the
 
"DA
TE  
AND
 
TIME"
 
menu
 
has
 
been

 
selected,
 
you
 
have
 
access
 
to
 
the
 
following

  settings:
-  
year
,
-  
month,
-
 
day
,
-  
hours,
-
 
minutes,
-
 
12
  or   24   hour   mode.
F  
Once
 
you
 
have
 
selected
 
a
 
setting,
 
press the "

7" or "8" buttons to
change   its   value.
F
Press the "
5" or "6" buttons to
switch respectively to the previous
or   next   setting.
F

Press
the "OK"  
button
 
to
 
record
 
the

 
change
 
and
 
return
 
to
 
the
 
normal
 
display

 
or
 
press
 
the
 
"Back"
button
to
  cancel.
Languages
Once
 
the
 
"LANGUAGES"
 
menu
 
has
 
been

 
selected,
 
you
 
can
 
choose
 
the
 
lan
-
guage
 
used
 
by
 
the
 
display
,  
from
 
a
 
pre-
defined

  list.For
 
safety
 
reasons,
 
configura
-
tion
 
of
 
the
 
multifunction
 
screen
 
by

 
the
 
driver
 
must
 
only
 
be
 
done

  when   stationary.
Vehicle parameters
Once
 
the
 
"VEHICLE
 
P
ARAM"  
menu
 
has

 
been
 
selected,
 
you
 
can
 
activate
 
or
 
deactivate

  the   following   equipment:
-  
"P
ARK  
BRAKE"
 
(Automatic
 
electric
 
parking

 
brake;
 
refer
 
to
 
the
 
"Driving"
 
section).
-
 
"BEND
 
LIGHTING"
 
(Directional
 
lighting;

 
refer
 
to
 
the
 
"V
isibility"  
sec
-
tion),
-  
"AUT
O  
HEADLAMPS"
 
(Automatic
 
illu

mination  
of
 
headlamps;
 
refer
 
to
 
the "V

isibility" section),
-  
"REAR
 
WIPE
 
ACT"
 
(Rear
 
wiper
 coupled
 with  reverse  gear;  refer  to  the "V
isibility" section),
-
 
"GUIDE
 
LAMPS"
 
(Guide-me-home
 
lighting;

 
refer
 
to
 
the
 
"V
isibility"  
sec
-
tion),
-
 
"ELECTRIC
 
BOOT"
 
(Selective
 
unlocking

 
of
 
the
 
boot;
 
refer
 
to
 
the
 
"

a ccess" section),
-
 
"CABIN
 
SELECT"
 
(Selective
 
un
-
locking;
 
refer
 
to
 
the
 
"Access"
 
sec
-
tion),
-
 
"DA
Y
 LAMPS"
 
(Daytime
 
running
 
lamps;

 
refer
 
to
 
the
 
"V
isibility"  
sec
-
tion).
MULTIFUNCTION SCREENS

22
37 
C4-2_en_Chap02_ecran-multifonction_ed01-2014
MONOCHROME SCREEN C
Displays in the screen
This displays the following information:
-  
time,
-

 
date,
-

 
ambient
 
temperature
 
(this
 
flashes
 
if
 
there

  is   a   risk   of   ice),
-
 
parking
  sensor   information,
-
 
parking
  space   measurement,
-
 
current
  audio   source,
-
 
telephone
 
or
 
Bluetooth
 
system
 
in
-
formation,
-
 
trip
 
computer
 
(refer
 
to
 
the
 
end
 
of
 
the
 
section),
-

 
alert
  messages,
-
 
settings
 
menus
 
for
 
the
 
screen
 
and
 
the

  vehicle   equipment. From
 
the
 
control
 
panel
 
of
 
your
 
audio
 system,
  you   can   press:
F button A to chooses between the
display
 
of
 
audio
 
information
 
in
 
full
 
screen

 
or
 
the
 
shared
 
display
 
of
 
au
-
dio
  and   trip   computer   information,
F
the "MENU" button for access to
the main menu,
F

the "
5" or "6" buttons to scroll
through
  the   items   on   the   screen,
F

the
"7" or "8"  
buttons
 
to
 
change
 
a
 
setting

  value,
F
the "OK"
  button   to   confirm,
or
F

the "Back"
 
button
 
to
 
abandon
 
the
 
operation

  in   progress.
Controls
F Press the "MENU" button for ac-
cess to the main menu:
-
 
"Multimedia",
-

 
"T
elephone",
-
 
"T
rip   computer",
-
 
"Bluetooth
  connection",
-
 
"Personalisation-configuration",
F


Press
the "7" or "8" button to se-
lect
 
the
 
menu
 
required,
 
then
 
confirm
 
by

  pressing   the   "OK"   button.
Main menu
"Multimedia" menu
With the  audio  system  switched  on,  this
 menu  allows  you  to  activate  or  de -
activate
 
the
 
functions
 
associated
 
with
 
use

 
of
 
the
 
radio
 
(RDS,
 
DAB 
/  FM  
auto
 
tracking,

 
RadioT
ext  
(TXT)
 
display)
 
or
 
to
 
choose

 
the
 
media
 
play
 
mode
 
(Normal,
 
Random,

  Random   all,   Repeat).
For
 
more
 
information
 
on
 
the
 
"Multimedia" application,

 
refer
 
to
 
the
 
"Audio
 
and T

elematics"   section.
MULTIFUNCTION SCREENS

22
38 
C4-2_en_Chap02_ecran-multifonction_ed01-2014
Define the vehicle parameters
This 
menu
 
allows
 
you
 
to
 
activate
 
or
 
de
-
activate
 
the
 
following
 
equipment,
 
clas
-
sified
  in   different   categories:
-
 
"Access
 
to
 
the
 
vehicle"
 
(see
 
the
 
"Access"

  section):
●
 
"Plip
 
action"
 
(Selective
 
unlocking
 
of

  the   driver's   door),
●
 
"Unlocking
 
boot
 
only"
 
(Selective
 
unlocking

  of   the   boot).
"Telephone" menu
With the audio  system  switched  on,  this  menu
 allows  you  to  make  a  call  or  view  
the

  various   telephone   directories.
For
 
more
 
information
 
on
 
the
 
"T
elephone"  
application,

 
refer
 
to
 
the
 
"Audio
 
and
 
T

elematics"   section. This
 
menu
 
allows
 
you
 
to
 
view
 
informa
-
tion   on   the   status   of   the   vehicle.
Warning log
This  
summarises
 
the
 
status
 
and
 
warn
-
ing  
messages
 
for
 
systems
 
(active,
 
not
 
active

 
or
 
faulty),
 
displaying
 
them
 
in
 
suc
-
cession   in   the   multifunction   screen.
F
Press the
"MENU" button for ac-
cess   to   the   main   menu.
F
Press the arrows, then the
"OK"

button to select the "Trip computer"
menu.
F In the " Trip computer"  menu,  se -
lect  the  "W arning  log"  line  and  con -
firm.
"Bluetooth connection"
menu "Trip computer" menu
Wit the  audio  system  on,  this  menu  al -
lows  a  Bluetooth  device  (telephone,  
media

 
player)
 
to
 
be
 
connected
 
or
 
dis
-
connected
 
and
 
the
 
connection
 
mode
 
to
 
be

 
defined
 
(hands-free,
 
playing
 
audio
 
files).
For

 
more
 
information
 
on
 
the
 
"Bluetooth
 
connection" application, refer to the
"Audio

  and  
T
elematics"   section.
"Personalisation-
configuration" menu
This menu gives  access  to  the  following  functions:
-
 
"Define
  the   vehicle   parameters",
-
 
"Choice
  of   language",
-
 
"Display
  configuration",
-
 
"Choice
  of   sounds".
MULTIFUNCTION SCREENS

22
40 
C4-2_en_Chap02_ecran-multifonction_ed01-2014
Choice of language
Once 
this
 
menu
 
has
 
been
 
selected,
 
you
 
can

 
choose
 
the
 
language
 
used
 
by
 
the
 
display

  from   a   pre-defined   list.
For
 
safety
 
reasons,
 
configura
-
tion
 
of
 
the
 
multifunction
 
screen
 
by

 
the
 
driver
 
must
 
only
 
be
 
done
 
when

  stationary.
Display configuration
This
 
menu
 
gives
 
access
 
to
 
the
 
following
 
settings:
-

 
"Choice
  of   units",
-
 
"Date
  and   time   adjustment",
-
 
"Display
  parameters",
-
 
"Brightness". Choice of sounds
This

 
menu
 
allows
 
you
 
to
 
choose
 
a
 
fam
-
ily
 
of
 
polyphonic
 
sounds
 
from
 
the
 
four
 
available.

 
These
 
sounds
 
are
 
grouped
 
together

 
in
 
a
 
family
 
and
 
are
 
adapted
 
to

 
suit
 
the
 
situation
 
and
 
context
 
(alert,
 
confirmation,

 
rejection,
 
direction
 
indica
-
tors,
  lighting   left   on,   key   in   ignition...).
Adjusting the date and time
F

Press
the "7" or "8" button to
display
 
the
 
"Display
 
configuration"
 
menu,

  then   press   "OK".
F

Press
the "5" or "6" button to se-
lect
 
the
 
"Date
 
and
 
time
 
adjustment"
 
button, then press

"OK".
F

Press
the "7" or "8" button to se-
lect
 
the
 
setting
 
to
 
modify
.  
Confirm
 
by

 
pressing
 
"OK"
,  
then
 
modify
 
the
 
setting

 
and
 
confirm
 
again
 
to
 
save
 
the

  modification.
F
 
Adjust
 
the
 
settings
 
one
 
by
 
one,
 
con
-
firming
  with   the   "OK"   button.
F

Press the "
5" or "6" button, then
the "OK" button to select the "OK"
box
 
and
 
confirm
 
or
 
the
 
"Back"
but-
ton
  to   cancel.
MULTIFUNCTION SCREENS

22
41 
C4-2_en_Chap02_ecran-multifonction_ed01-2014
COLOUR SCREEN
From the navigation  system  control  panel,
  to   select   one   of   the   applications:
F
 
press
 
the
 
dedicated
 
"RADIO"
,
"MUSIC", "NAV", "TRAFFIC",
"PHONE" or "SETUP" button for
access
  to   the   corresponding   menu,
F
 
turn
 
the
 
dial
 
A
to select a function,
an
  item   in   a   list,
F

press button
B  
to
 
confirm
 
the
 
selec
-
tion,
or
F


press the
"Back" button to aban-
don
 
the
 
current
 
operation
 
and
 
return
 
to

  the   previous   display.
With
 
repeated
 
presses
 
on
 
the
 
C

"MODE"
  button,   the   screen   displays:
-
 
"RADIO
  /   MEDIA"*,
-
 
"TELEPHONE"*,
-

 
"FULL 
SCREEN   MAP"*,
-
 
"MAP 
IN  
A 
WINDOW"*,
-
 
"TRIP 
COMPUTER".
Controls "SETUP" menu
F Press the "SETUP" button to open
the   configuration   menu:
-
 
"Sound
  choice",
-
 
"Display
  configuration",
-
 
"Speech
  synthesis   setting".
-
 
"Select
  language",
-
 
"Define
  vehicle   parameters",
-
 
"Alert
  log".
For
 
safety
 
reasons,
 
configura
-
tion
 
of
 
the
 
multifunction
 
screen
 
by

 
the
 
driver
 
must
 
only
 
be
 
done
 
when

  stationary.
Displays in the screen
Depending on  the  context,  it  displays  the
  following   information:
-
 
time,
-

 
date,
-

 
altitude,
-
 ambient

 
temperature
 
(the
 
value
 
dis
-
played
 
flashes
 
if
 
there
 
is
 
a
 
risk
 
of
 
ice),
-

 
parking
  sensor   information,
-
 
parking
  space   measurement,
-
 
audio
  functions,
-
 directory

  and   telephone   information,
-
 
satellite navigation system information,
- trip   computer,
-  
alert
  messages,
-
 
settings
 
menus
 
for
 
the
 
screen,
 
the
 
satellite

 
navigation
 
system
 
and
 
ve
-
hicle
  systems.
*  For more  information  on  these  applica -
tions,  refer  to  the  "Audio  and  telematics" section.
MULTIFUNCTION SCREENS