ignition Citroen C4 DAG 2014.5 2.G User Guide

26 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Warning/indicator lampis onCause Action/Observations
Parking brake fixed.The
 
parking
 
brake
 
is
 
applied
 
or

  not   properly   released.Release
  the   parking   brake   to   switch   off  
the

  warning   lamp,   keeping   your   foot   on  
the

  brake   pedal.
Observe
  the   safety   recommendations.
For
  more   information   on   the   parking  
brake,

  refer   to   the   "Parking   brake"   and  
"Electric

  parking   brake"   sections.
Electric
parking brake fixed.The
  electric   parking   brake   is  
applied.Release

  the   electric   parking   brake   to  
switch

  off   the   warning   lamp:   with   your  
foot

  on   the   brake   pedal,   pull   the   electric  
brake

  control.
Observe
  the   safety   recommendations.
For
  more   information   on   the   electric  
parking

  brake,   refer   to   the   "Driving"  
section.
Deactivation of the automatic functions of the electric
parking brake fixed.The

  "automatic   application"  
(on

  switching   off   the   engine)  
and

  "automatic   release"  
functions

  are   deactivated   or  
faulty

.Activate
  the   function   (according   to  
country)

  via   the   vehicle   configuration  
menu

  or   contact   a   CITROËN   dealer   or   a  
qualified

  workshop.
Diesel engine pre-heating fixed.The
  key   is   at   position   2  
(ignition

  on)   in   the   ignition  
switch.W

ait   until   the   warning   lamp   goes   off  
before

  starting.
The
  period   of   illumination   of   the   warning  
lamp

  is   determined   by   the   climatic  
conditions

  (up   to   about   thirty   seconds   in  
extreme

  climatic   conditions).
If
  the   engine   does   not   start,   switch   the  
ignition

  off   and   then   on,   wait   until   the  
warning

  lamp   goes   off   again,   then   start  
the

  engine.
1
MONITORING

30 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Service indicator
System that informs  the  driver  when  the  next
 service  is  due,  in  accordance  with  
the

  manufacturer's   service   schedule.
The
 
point
 
at
 
which
 
the
 
service
 
is
 
due
 
is
 
calculated

 
from
 
the
 
last
 
service
 
indica
-
tor
 
zero
 
reset,
 
according
 
to
 
the
 
distance
 
covered

 
and
 
the
 
time
 
elapsed
 
since
 
the
 
last

  service.
For
b lueH d i d iesel versions, the level
of
 
deterioration
 
of
 
the
 
engine
 
oil
 
may
 
also

 
be
 
taken
 
into
 
account,
 
depending
 
on

  the   country   of   sale.
More than 1800 miles (3000 km)
remain before the next service is due
When the ignition  is  switched  on,  no  service
 information  appears  in  the  in -
strument
  panel   central   screen.
Between 600 miles (1 000 km) and
1800 miles (3 000 km) remain before
the next service is due
For a  few  seconds  after  the  ignition  is  switched
 on,  the  spanner  symbolising  
the

 
service
 
operations
 
comes
 
on.
 
The
 
distance

 
recorder
 
display
 
line
 
or
 
a
 
spe
-
cific
 
message
 
in
 
the
 
instrument
 
panel
 
central

 
screen
 
indicates
 
the
 
distance
 
re
-
maining
  before   the   next   service   is   due.
For example:
 
1
 
700
 
miles
 
(2
 
800
 
km)
 
remain

  before   the   next   service   is   due.
For
 
a
 
few
 
seconds
 
after
 
the
 
ignition
 
is
 
switched

  on,   the   screen   indicates:
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560 miles  (900  km)  remain  before
  the   next   service   is   due.
For
 
a
 
few
 
seconds
 
after
 
the
 
ignition
 
is
 
switched

  on,   the   screen   indicates:
A
 few

 
seconds

 
after

 
the

 
ignition

 
is

 
switched

 
on,

 
the spanner goes off

; the
distance
 
recorder

 
resumes

 
its

 
normal

 
operation.

 
The

 
screen

 
then

 
indicates

 
the

 
total
 
and
 
trip
 
distances. A
 few

 
seconds
 
after
 
the
 
ignition
 
is
 
switched

 
on,
 
the
 
distance
 
recorder
 
resumes

 
its
 
normal
 
operation.
 
The
spanner remains on

 
to
 
indicate
 
that
 
a
 
service

  must   be   carried   out   soon.
1
MONITORING

31 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Service overdue
For 
a
 
few
 
seconds
 
after
 
the
 
ignition
 
is
 
switched

 
on,
 
the
spanner flashes to
indicate
 
that
 
the
 
service
 
must
 
be
 
car
-
ried
  out   as   soon   as   possible.
Example:
 
the
 
service
 
is
 
overdue
 
by
 
180

  miles   (300   km).
For
 
a
 
few
 
seconds
 
after
 
the
 
ignition
 
is
 
switched

  on,   the   screen   indicates:
A
 few

 
seconds
 
after
 
the
 
ignition
 
is
 
switched

 
on,
 
the
 
distance
 
recorder
 
re
-
sumes
 
its
 
normal
 
operation.
 
The span
-
ner remains on. The
 spanner  comes  on  if  you  
have

 
exceeded
 
the
 
specified
 
time

 
interval
 
since
 
the
 
last
 
ser
-
vice,
 
as
 
indicated
 
in
 
the
 
manu
-
facturer's
  service   schedule.
For
b lueH d i d iesel versions,
the
 
spanner
 
may
 
also
 
come
 
on
 
before

 
the
 
normal
 
service
 
point,
 
according

 
to
 
the
 
level
 
of
 
dete
-
rioration
 
of
 
the
 
engine
 
oil,
 
which
 
depends

 
on
 
the
 
driving
 
condi
-
tions
  of   the   vehicle.
Service indicator zero reset This operation cannot be car-
ried
 
out
 
while
 
a
 
reminder
 
of
 
the
 
servicing

 
information
 
is
 
being
 
displayed.
Following

 
this
 
operation,
 
if
 
you
 
wish

 
to
 
disconnect
 
the
 
battery
,  
lock

 
the
 
vehicle
 
and
 
wait
 
at
 
least
 
five

 
minutes
 
for
 
the
 
zero
 
reset
 
to
 
be

  registered.
Recalling the service information
You
 
can
 
recall
 
the
 
service
 
information
 
at

  any   time.
F
 
Briefly
 
press
 
the
 
".../000"
 
trip
 
dis
-
tance
  recorder   zero   reset   button.
 The

 
service
 
information
 
is
 
displayed
 
for

  a   few   seconds.
After
 
each
 
service,
 
the
 
service
 
indicator
 
must

  be   reset   to   zero.
If
 
you
 
have
 
carried
 
out
 
the
 
service
 
on
 
your

  vehicle   yourself:
F
 
switch
  off   the   ignition,
F
 
press
 
and
 
hold
 
the
 
".../000"
 
trip
 
dis
-
tance
  recorder   zero   reset   button,
F
 
switch
 
on
 
the
 
ignition;
 
the
 
distance
 
recorder

 
display
 
begins
 
a
 
count
-
down,
F
 
when
 
the
 
screen
 
indicates
 
"=/0"

and
 
the
 
spanner
 
disappears,
 
re
-
lease
  the   button.
For
b lueH d i d iesel versions, this alert
is
 
also
 
accompanied
 
by
 
the
 
fixed
 
illu-
mination

 
of
 
the
 
Service
 
warning
 
lamp
 
when

  the   ignition   is   switched   on.
1
MONITORING

32 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Distance recorders
The total and  trip  distances  are  dis -
played  for  thirty  seconds  when  the  ig -
nition
 
is
 
switched
 
of
f,  
when
 
the
 
driver's
 
door

 
is
 
opened
 
and
 
when
 
the
 
vehicle
 
is
 
locked

  or   unlocked.
Trip distance recorder Total distance recorder
Setting the time and the time
format in the instrument panel
without audio system
On the  two-tone  instrument  panel  with -
out  audio  system,  to  adjust  the  time,  
use buttons

A  
and
 
B
then carry out the
operations
  in   the   following   order:
F

press buttons
A  
and
 
B
 
simultane
-
ously:
  the   minutes   flash,
F
press A
 
to
 
increase
 
the
 
minutes
 
or
 
B

  to   reduce   the   minutes,
F

press buttons
A  
and
 
B
 
simultane
-
ously:
  the   hours   flash,
F
press A to increase the hours or B
to
  reduce   the   hours,
F

press buttons
A  
and
 
B
 
simultane
-
ously:
 
24
 
H
 
or
 
12
 
H
 
is
 
displayed
 
and
 
flashes,
F


press button
A or B  
to
 
change
 
the
 
format,
F


press buttons
A  
and
 
B
 
simultane
-
ously
  to   exit   from   time   setting.
After approximately 30  seconds  without  any  ac -
tion,   the   screen   returns   to   the   normal   display.
Measures the total  distance  travelled  by
 the  vehicle  since  its  first  registration.
Measures
 
the
 
distance
 
travelled
 
since
 
it
 
was

  last   reset   to   zero   by   the   driver.
F
 
With
 
the
 
ignition
 
on,
 
press
 
and
 
hold
 
this

  button   until   zeros   appear. On
 
the
 
two-tone
 
instrument
 
panel
 
with
-
out  
audio
 
system,
 
to
 
change
 
the
 
display
 
units, use buttons

A  
and
 
B
then carry
out   the   operations   in   the   following   order:
F
press buttons
A  
and
 
B
 
simultane
-
ously  
for
 
three
 
seconds:
 
km/h
 
or
 
mph

  flashes,
F
press button
A or B  
to
 
change
 
the
 
units,
F

press buttons
A  
and
 
B
 
simultane
-
ously   to   exit   from   setting   units.
After  approximately  30  seconds  without  any action, the screen returns to the
normal
  display
Setting units in the instrument
panel without audio system
Setting the time and units in the
multifunction screen
The other instrument  panels  are  as -
sociated  with  an  audio  system  and  a  
multifunction

 
screen.
 
Refer
 
to
 
the
 
cor
-
responding
  screens.
1
MONITORING

34 
C4-2_en_Chap01_controle-de-marche_ed01-2014
In the instrument  panel,  you  can  change the
 colour  of  its  dials  (button  A)
 indepen -
dently
  from   that   of   the   screens   (button   B).
There
 
are
 
five
 
colour
 
variants,
 
from
 
white

  to   blue.
F

press
the appropriate button as
many
 
times
 
as
 
needed
 
to
 
obtain
 
the
 
desired

  colour. This
 
menu
 
allows
 
you
 
to
 
choose
 
a
 
fam
-
ily  
of
 
polyphonic
 
sounds
 
from
 
the
 
four
 
available.

 
These
 
sounds
 
are
 
grouped
 
together

 
in
 
a
 
family
 
and
 
are
 
adapted
 
to

 
suit
 
the
 
situation
 
and
 
context
 
(alert,
 
confirmation,

 
rejection,
 
direction
 
indica
-
tors,   lighting   left   on,   key   in   ignition...).
Customising the instrument
panel colours
Customising the polyphonic
sounds
For the customisable colour
instrument panel with audio or
navigation system
F

Press the
"MENU" button for ac-
cess
  to   the   main   menu.
F
 
Select
 
the
 
"Personalisation-confi
-
guration"

  menu   and   confirm.
F
 
Select
 
the
 
"Choice
 
of
 
sounds"
 
line
 
and

  confirm.
F
 
Select
 
the
 
desired
 
family
 
of
 
sounds
 
and

  confirm.
F
 
Save
 
the
 
modifications
 
by
 
confirm
-
ing
  "OK". For
 
safety
 
reasons,
 
the
 
driver must

 
only
 
carry
 
out
 
these
 
opera
-
tion   when   stationary.
1
MONITORING

22
40 
C4-2_en_Chap02_ecran-multifonction_ed01-2014
Choice of language
Once 
this
 
menu
 
has
 
been
 
selected,
 
you
 
can

 
choose
 
the
 
language
 
used
 
by
 
the
 
display

  from   a   pre-defined   list.
For
 
safety
 
reasons,
 
configura
-
tion
 
of
 
the
 
multifunction
 
screen
 
by

 
the
 
driver
 
must
 
only
 
be
 
done
 
when

  stationary.
Display configuration
This
 
menu
 
gives
 
access
 
to
 
the
 
following
 
settings:
-

 
"Choice
  of   units",
-
 
"Date
  and   time   adjustment",
-
 
"Display
  parameters",
-
 
"Brightness". Choice of sounds
This

 
menu
 
allows
 
you
 
to
 
choose
 
a
 
fam
-
ily
 
of
 
polyphonic
 
sounds
 
from
 
the
 
four
 
available.

 
These
 
sounds
 
are
 
grouped
 
together

 
in
 
a
 
family
 
and
 
are
 
adapted
 
to

 
suit
 
the
 
situation
 
and
 
context
 
(alert,
 
confirmation,

 
rejection,
 
direction
 
indica
-
tors,
  lighting   left   on,   key   in   ignition...).
Adjusting the date and time
F

Press
the "7" or "8" button to
display
 
the
 
"Display
 
configuration"
 
menu,

  then   press   "OK".
F

Press
the "5" or "6" button to se-
lect
 
the
 
"Date
 
and
 
time
 
adjustment"
 
button, then press

"OK".
F

Press
the "7" or "8" button to se-
lect
 
the
 
setting
 
to
 
modify
.  
Confirm
 
by

 
pressing
 
"OK"
,  
then
 
modify
 
the
 
setting

 
and
 
confirm
 
again
 
to
 
save
 
the

  modification.
F
 
Adjust
 
the
 
settings
 
one
 
by
 
one,
 
con
-
firming
  with   the   "OK"   button.
F

Press the "
5" or "6" button, then
the "OK" button to select the "OK"
box
 
and
 
confirm
 
or
 
the
 
"Back"
but-
ton
  to   cancel.
MULTIFUNCTION SCREENS

22
42 
C4-2_en_Chap02_ecran-multifonction_ed01-2014
Choice of sounds
This 
menu
 
allows
 
you
 
to
 
choose
 
a
 
family

 
of
 
polyphonic
 
sounds
 
from
 
four
 
available.

 
These
 
sounds
 
are
 
grouped
 
together

 
in
 
a
 
family
 
and
 
are
 
adapted
 
to

 
suit
 
the
 
situation
 
and
 
context
 
(alert,
 
confirmation,

 
rejection,
 
direction
 
indica
-
tors,
  lighting   left   on,   key   in   ignition...).
Display configuration
This
 
menu
 
is
 
used
 
to
 
select
 
the
 
colour scheme

 
for
 
the
 
screen,
 
adjust
 
the
 
bright
-
ness,
 
set
 
the
 
date
 
and
 
time
 
and
 
to
 
choose the

 
units
 
for
 
distance
 
(km
 
or
 
miles),
 
fuel consumption

 
(l/100
 
km,
 
mpg
 
or
 
km/l)
 
and temperature

  (°Celsius   or   °Fahrenheit).Adjusting the voice synthesiser
This
 
menu
 
is
 
used
 
to
 
adjust
 
the
 
volume
 
setting

 
for
 
navigation
 
instructions
 
and
 
to

 
choose
 
the
 
type
 
of
 
voice
 
(male
 
or
 

female).
Adjusting the date and time
-

 
Press
  on   SETUP.
-
 
Select
 
"Display
 
configuration"
 
and
 
confirm.
-

 
Select
 
"Set
 
date
 
and
 
time"
 
and
 
con
-
firm.
Select
 
"Minute
 
adjustment
 
via
 
GPS"
 
so
 
that

 
the
 
minutes
 
are
 
adjusted
 
automati
-
cally
  by   satellite   reception.
-
 
Select
 
the
 
setting
 
to
 
modify
.  
Confirm
 
by

 
pressing
 
on
 
OK
,  
then
 
modify
 
the
 
setting

 
and
 
confirm
 
again
 
to
 
save
 
the

  modification.
-
 
Adjust
  the   settings   one   by   one.
-
 
Select
 
"
OK" in the screen then con-
firm
  to   save   the   setting. Choice of language
This
 
menu
 
is
 
used
 
to
 
choose
 
the
 
language used

  by   the   screen   from   a   defined   list.
Vehicle parameters
This
 
menu
 
is
 
used
 
to
 
activate
 
or
 
deac
-
tivate
 
certain
 
driving
 
and
 
comfort
 
sys
-
tems,
  classified   by   category:
-
 
"Driver
  aid":
●
 
"Electric
 
brake*"
 
(Automatic
 
elec
-
tric
 
parking
 
brake;
 
see
 
"Driving"
 
section),
●

 
"Rear
 
wiper"
 
(Rear
 
wiper
 
coupled
 
to

 
reverse
 
gear;
 
see
 
"V
isibility"  
section),
●
 "Speed

 
limits"
 
(Memorising
 
speed settings

 
for
 
the
 
cruise
 
control
 
and speed

 
limiter;
 
see
 
"Driving"
 
section).Alert log
This

 
lists
 
the
 
active
 
alerts
 
by
 
displaying
 
in

 
turn
 
the
 
dif
ferent  
messages
 
associ
-
ated
  with   them.
-
 "V ehicle  access"  (see  "Access"  sec -
tion):
●
 "Driver

 
doors
 
selectivity"
 
(Selective unlocking

  of   the   driver's   door),
●
 
"Rear
 
doors
 
selectivity"
 
(Selective
 
unlocking

 
of
 
the
 
boot
 
using
 
the
 
centre

 
button
 
on
 
the
 
remote
 
con
-
trol;
  see   "Access   section).
-
 
"Driving
 
lights"
 
(see
 
"V
isibility"  
sec
-
tion):
●
 
"Day lights*" (Daytime  running  lamps),
● "Directional headlights"  (Main  /  additional
  directional   lighting).
-
 
"Comfort
 
lighting"
 
(see
 
"V
isibility"  
section):
●

 
"W
elcome  
lights"
 
(Interior
 
wel
-
come
  lighting),
●
 
"Running
 
lights"
 
(Automatic
 
timed
 
operation

  of   headlamps).
*
 
Depending   on   country.
MULTIFUNCTION SCREENS

22
46 
C4-2_en_Chap02_ecran-multifonction_ed01-2014
A few definitions…
This value may  vary  following  a  change
 in  the  style  of  driving  or  
the

 
relief,
 
resulting
 
in
 
a
 
signifi
-
cant
 
change
 
in
 
the
 
current
 
fuel
 
consumption.
If

 
dashes
 
are
 
displayed
 
continu
-
ously
 
while
 
driving
 
in
 
place
 
of
 
the digits,

 
contact
 
a
 
CITROËN
 
dealer or

  a   qualified   workshop. This
 
function
 
is
 
only
 
displayed
 
from

  20   mph   (30   km/h).
Range
(miles   or   km)
This  
indicates
 
the
 
distance
 
which

 
can
 
still
 
be
 
travelled
 
with

 
the
 
fuel
 
remaining
 
in
 
the
 
tank
 
in
 
relation

 
to
 
the
 
average
 
fuel
 
consump
-
tion
 
over
 
the
 
last
 
few
 
miles
 
(kilometres)
 
travelled.
When

 
the
 
range
 
falls
 
below
 
20
 
miles

(30
 
km),
 
dashes
 
are
 
displayed.
 
After
 
fillin

g
 
with
 
at
 
least
 
5
 
litres
 
of
 
fuel,
 
the
 
range

 
is
 
recalculated
 
and
 
is
 
displayed
 
when

  it   exceeds   60   miles   (100   km).Current fuel consumption
(mpg
  or   l/100   km   or   km/l)
This  
is
 
the
 
average
 
fuel
 
consump
-
tion   during   the   last   few   seconds.
Average fuel consumption
(mpg   or   l/100   km   or   km/l)
 

 
This
 
is
 
the
 
average
 
fuel
 
con
-
sumption
 
since
 
the
 
last
 
trip
 
computer

  zero   reset.Average speed
(mph
  or   km/h)
This  
is
 
the
 
average
 
speed
 
calcu
-
lated  
since
 
the
 
last
 
trip
 
computer zero

  reset   (ignition   on).
Distance travelled
(miles   or   km)
This  
indicates
 
the
 
distance
 travelled
 since  the  last  trip  computer
  zero   reset.
Stop & Start time counter
(minutes/seconds
 
or
 
hours/
minutes)
If

 
your
 
vehicle
 
is
 
fitted
 
with
 
Stop
 
&
 
Start,
 
a

 
time
 
counter
 
calculates
 
the
 
time
 
spent
 
in

  STOP
 
mode   during   a   journey.  
It

 
resets
 
to
 
zero
 
every
 
time
 
the
 
ignition
 
is

  switched   on   with   the   key.
The
 
fuel
 
consumption
 
of
 
your
 
vehicle

 
will
 
be
 
higher
 
than
 
the

 
official
 
figures
 
obtained
 
by

 
CITROËN
 
during
 
the
 
first
 
3

  000   miles  
(5
  000   km)  
of
 
the
 
vehicle's

  life.
MULTIFUNCTION SCREENS

33
54 
C4-2_en_Chap03_confort_ed01-2014
9. "REST" function: ventilation with
the engine off
On switching on the engine
-
 
The
 
control
 
screens
 
come
 
on:
 
the
 
function

  is   available.
-
 
Pressing
 
the
 
REST
button activates
the
 
ventilation
 
for
 
a
 
few
 
minutes.
 
a
ctivation of the function is con-
firmed
 
by
 
the
 
display
 
of
 
two
 
dashes
 
in

 
the
 
control
 
screens
 
and
 
four
 
air
 
flow

  level   indicator   lamps.
-
 
The
 
function
 
can
 
be
 
deactivated
 
and
 
reactivated

 
if
 
the
 
control
 
screens
 
are

  on.
-
 
The
 
screens
 
go
 
of
f  
at
 
the
 
end
 
of
 
this
 
period.Even

 
with
 
the
 
engine
 
is
 
of
f,  
you can operate the ventila

-
tion
  for   a   few   minutes.
For
 
example,
 
while
 
you
 
are
 
away

 
from
 
the
 
vehicle,
 
the
 
passengers

 
can
 
still
 
enjoy
 
some
 
air
 
cir
-
culation
 
without
 
having
 
the
 
engine
 
run
-
ning.
This
 
function
 
is
 
available
 
after
 
switching
 
on

 
the
 
ignition,
 
as
 
well
 
as
 
after
 
stopping
 
the

  engine.
The
 
period
 
that
 
the
 
function
 
is
 
available
 
depends

 
on
 
the
 
state
 
of
 
charge
 
of
 
the
 
battery

.
You can activate the "REST" func-
tion
 
while
 
the
 
air
 
conditioning
 
control
 
screens

  are   on.
7. Air flow adjustment
F

T

urn this control to the left
to
 
decrease

 
the

 
air

 
flow

 
or

 
to

 
the

 
right

 
to

 
increase

 
the

 
air

 
flow.
The
 
air

 
flow

 
indicator

 
lamps,

 
between

 
the

 
two

 
fans,

 
come

 
on

 
progressively

 
in

 
relation

 
to
 
the
 
value
 
requested.
5. Air conditioning On / Off
F

Press

this button to switch
off
 
the
 
air
 
conditioning.
Switching
 
the

 
system

 
of

f
 
could

 
result

 
in

 
discomfort

 
(humidity,
 
condensation).
F
 
Press

 
this

 
button

 
again

 
to

 
return

 
to

 
automatic

 
operation

 
of

 
the

 
air

 
con

-
ditioning.
 
The

 
indicator

 
lamp

 
on

 
the

 
"A/C"

 
button
 
comes
 
on.
F
 
Press

 
one

 
or

 
more

 
but

-
tons
 
to

 
direct

 
the

 
air

 
flow

 
towards:
6.

Air distribution adjustment
-
 
the

 
windscreen

 
and

 
side

 
windows

 
(demisting

 
or
 
defrosting),
-
 
the

 
outer
 
and
 
centre
 
air
 
vents,
-
 
the

 
footwells.
You
 
can

 
combine

 
the

 
three

 
orientations

 
to

 
obtain
 
the
 
desired
 
air
 
distribution. 8. Air intake / Air recirculation
F

Press this button for recir

-
culation
 
of

 
the

 
interior

 
air

.
 
The

 
indicator

 
lamp

 
in

 
the

 
button

 
comes
 
on.
Air
 
recirculation

 
enables

 
the

 
passenger

 
compartment

 
to

 
be

 
isolated

 
from

 
exte

-
rior
 
odours
 
and
 
smoke.
F
a
s soon as possible, press this but-
ton
 
again

 
to

 
permit

 
the

 
intake

 
of

 
out

-
side
 
air

 
and

 
prevent

 
the

 
formation

 
of

 
condensation.

 
The

 
indicator

 
lamp

 
in

 
the

 
button
 
goes
 
off.
Avoid
 
prolonged

 
operation

 
in

 
in

-
terior
 
air

 
recirculation

 
mode

 
(risk

 
of

 
misting

 
and

 
deterioration

 
of

 
air

 
quality).
COMFORT

33
58 
C4-2_en_Chap03_confort_ed01-2014
Driver's seat electric
adjustments
Forwards-backwardsThe electrical functions of the
driver's
 
seat
 
are
 
deactivated
 
ap
-
proximately  
one
 
minute
 
after
 
the
 
ignition

  is   switched   off.
To  
reactivate
 
them,
 
switch
 
on
 
the
 
ignition.
F
T ilt the rear part of the control up-
wards
 or  downwards  to  obtain  the  
required

  height.
F

T
ilt the front part of the control up-
wards
 
or
 
downwards
 
to
 
obtain
 
the
 
required

  angle.
Cushion height and angle
F  T ilt  the  control  forwards  or  rear -
wards
 to  adjust  the  angle  of  the  seat  
backrest.
Seat backrest angle
F
 
Push
 
the
 
control
 
forwards
 
or
 
rear
-
wards
  to   slide   the   seat. Before
 
moving
 
the
 
seat
 
backwards,
 
ensure
 
that
 
there
 
is
 
nothing
 
that
 
might
 
prevent

 
the
 
full
 
travel
 
of
 
the
 
seat,
 
so
 
as
 
to
 
avoid
 
the
 
risk
 
of
 
of
 
jamming
 
the
 
seat

 
caused
 
by
 
the
 
presence
 
of
 
objects
 
on
 
the
 
floor
 
behind
 
the
 
seat
 
or
 
rear
 
passengers.

  If   the   seat   jams,   stop   the   movement   immediately.
COMFORT