display Citroen C4 PICASSO 2008 1.G User Guide

L
J
H
MR
O
M
JLH
O
R
K
N
46
II
PERSONALISATION and
CONFIGURATION
To activate/deactivate rear screen wipe when you engage reverse gear :
1. Press on O.
2. Use J or M to select "Person-alisation-Confi guration", then confi rm your choice with a press on L.
3. Then select the sub-menu for vehicle parameters. Confi rm your choice with a press on L.
4. Using J or M, select "park-ing assistance". Confi rm your choice with a press on L.
5. Then by pressing L, select/deselect triggering of rear screen wipe in reverse gear, to activate/deactivate this.
6. Validate with "OK" on the dis-play.
TRIP COMPUTER
To enter the distance to be travelled in the trip computer :
1. Press on O.
2. Use J or M to select the icon for the trip computer, then con-fi rm your choice with a press on L.
3. Press J or M to select entry of distance. Confi rm your choice with a press on L.
4. To choose the distance, select the fi gure you wish to modify via J or M, then confi rm your choice with a press on L.
5. Using J or M, adjust the value then validate with a press on L.
6. Validate with "OK" on the dis-play.
To access the log of alerts in the trip computer:
1. Press on O.
2. Use J or M to select the icon for the trip computer, then con-fi rm your choice with a press on L.
3. Select the log of alerts.
4. When you see the list displayed, scroll down using J or M.
5. Press on H, to return to the permanent display.
To access the status of functions, proceed in a similar manner.
To activate/deactivate the automatic guide-me-home lighting :
1. Press on O.
2. Use J or M to select "Person-alisation-Confi guration", then confi rm your choice with a press on L.
3. Then select the sub-menu for vehicle parameters. Confi rm your choice with a press on L.
4. Using J or M, select "lighting and signalling". Confi rm your choice with a press on L.
5. Then by pressing L, select/deselect "guide-me-home lighting" to activate/deactivate this. After activation, choose its duration : press on L, then use J or M to select the dura-tion and then press on L.
6. Validate with "OK" on the dis-play.
M U L T I F U N C T I O N S C R E E N C

L
J
H
MR
O
M
JLH
O
R
K
N
48
II
To choose the units :
1. Press on O.
2. Use J or M to select "Person-alisation-Confi guration", then confi rm your choice with a press on L.
3. Select the display confi guration using J or M. Confi rm with a press on L.
4. Then select the sub-menu for units. Confi rm your choice with a press on L.
5. Using J or M, select the unit you wish to modify (Tempera-ture or Consumption), then validate by pressing L.
6. Validate with "OK" on the dis-play.
Note : This choice concerns all the information (Consumption - Speed) appearing on the displays.
To adjust the date and the time :
1. Press on O.
2. Use J or M to select "Person-alisation-Confi guration", then confi rm your choice with a press on L.
3. Select the display confi guration using J or M". Confi rm with a press on L.
4. Select the adjustment for the date and the time, using J or M. Confi rm with a press on L.
5. Press J or M to select the values you wish to modify. Confi rm your choice with a press on L.
6. Make your adjustments by pressing J or M, validating each adjustment choice by pressing L.
7. Validate with "OK" on the dis-play.
M U L T I F U N C T I O N S C R E E N C
To choose the language :
1. Press on O.
2. Use J or M to select "Person-alisation-Confi guration", then confi rm your choice with a press on L.
3. Make your choice of language, using J or M.
4. Using J or M, select the lan-guage and validate your choice with a press on L.
5. Validate with "OK" on the dis-play.

L
J
H
MR
O
M
K
O
RHJL
N
12345II
49
H - Cancellation of the opera-tion or return to the previ-ous display
R - Selection of the type of in-formation to be displayed permanently (date, radio-CD, trip computer) on the right of the screen
Main Menu
Press on the button O to view the "Main Menu" of the multifunction screen.
This menu gives you access to the following functions :
Trip computer
(See NaviDrive instructions)
Directory
(See NaviDrive instructions)
Telematics
(See NaviDrive instructions)
Confi guration, for adjusting various parameters (date, time, units)
(See NaviDrive instructions)
Map
(See NaviDrive instructions)
Video
(See NaviDrive instructions)Navigation/guidance
(See NaviDrive instructions)
Audio
(See NaviDrive instructions)
It is recommended that the driver should not manipulate the controls described below while the vehicle is in motion.1- Outside temperature
2 - Directory
3 - Date
4 - Telephone
5 - Time
When the outside temperature is between +3 °C and -3 °C, the dis-play of temperature fl ashes (ice risk).
Note: The outside temperature displayed may be greater than the actual temperature if the vehicle is parked in bright sunlight.
Controls
O - Access to the "Main Menu"
J or M - Scrolling in the screen menus
L - Validation and Selection in the menus of the function chosen or the value modifi ed
M U L T I F U N C T I O N S C R E E N D T

II
51
T R I P C O M P U T E R
Version for multifunction screen AVersion for multifunction screens C and DTRangeThis is the number of kilometres (or miles) that can still RangeRange
be travelled on the fuel remaining in the tank. This is the number of kilometres (or miles) that can still This is the number of kilometres (or miles) that can still
When the distance remaining to be travelled is less be travelled on the fuel remaining in the tank. be travelled on the fuel remaining in the tank.
than 25 km (around 15 miles), only three dashes will When the distance remaining to be travelled is less When the distance remaining to be travelled is less
be displayed.than 25 km (around 15 miles), only three dashes will than 25 km (around 15 miles), only three dashes will
After a re-initialisation of the trip computer, the indica-be displayed.be displayed.
tion of range only becomes signifi cant after a certain After a re-initialisation of the trip computer, the indica-After a re-initialisation of the trip computer, the indica-
length of time.tion of range only becomes signifi cant after a certain tion of range only becomes signifi cant after a certain
Average consumptionThis is the relationship between the fuel consumed and the distance travelled since the last time the tr ip computer was reset to zero.
Instantaneous consumptionThis is the result based on consumption recorded in the last two seconds.This function only operates above 30 km/h (approx. 20 mph).
Average speedThis is the result (since the last time the trip compute r was reset to zero), from dividing the distance travelled by the time taken (time with the ignition switched on).
Distance travelledThis is the number of kilometres (or miles) travelled since the last time the trip computer was reset to zero.
Distance remaining to be travelled To enter this, see “Multifunction screens C and DT”.

52
II
Cruise control and speed limiter Audio system controls
Direction indicator and lighting lamps
Optional function controlsMultifunction display controls
F I X E D C E N T R E D C O N T R O L S
S T E E R I N G W H E E L

54
II
OPTIONAL FUNCTION CONTROLS MULTIFUNCTION DISPLAY CONTROLS
Rheostat for dashboard lighting (instrument panel + controls)
Start of voice recognition (see chapter on Radio -NaviDrive instructions) Access to the “Main menu” *Scrolling in the multifunction displaydisplay
Pick-up / hang-up telephone (see NaviDrive instructions)
Personalisation button :
- Illumination / extinction of interior lamp or
- Diagnosis or
- Personalisation of display of in-formation in the instrument panel or
- Choice of background colour for the instrument panel.
To view the personalisation menu via this button, give it a long press.
Selection of the type of information to be displayed on the right of the screen (radio, trip computer, navigation / guidance, etc.) and for multifunction screen A, choice of activation/deactivation of your functions and adjustment choices
Cancellation of the current operation or return to the previous display
Air recirculationValidation of the function chosenor of the value modifi ed
Pick-up / hang-up (see chapter on Radio)
* To comply with legisla-tion in certain countries, the "Menu" control may be deactivated while the vehicle is in motion.
Display of “Directory” menu (see chapter on Radio)
F I X E D C E N T R E D C O N T R O L S
S T E E R I N G W H E E L

11
2II
57
The (6-speed) electronic gearbox offers you a choic
e of two driving modes :
- automatic mode,
- manual mode, with levers under the steering wheel 1.
Mode selection :
- automatic mode : selector 2 in position A.
- manual mode : selector 2 in position M.
Note : in automatic mode, instant manual operation is possible any time you action one of the levers 1.
Selection position
-The selector position is displayed in the instrument panel, on the left on multifunction screens A and C and on the right on multifunction screen DT.
-A background-litposition grille associated with the selector allows you to view the position selected.
When the ignition is on, lighting of the SERVICE wa rning lamp, accompanied by a sound signal and the message “Gearbox faulty” indicates a malfunctio n.
Urgently contact a CITROËN dealer.
For safety :

1
62
II
Selector position
The position of the selector is displayed in the instrument panel, on the left on multifunction screens A and C, on the right on multifunction screen DT.
A position grille relating to the selector allows you to vie w the position that is selected.
For safety :

–+II
65
The fl ashing of the warning lamp for the position reque
sted signals that this position is not yet obtained.If the warning lamp is on fi xed, the position is confi rmed.Display of a dash in the rev counter indicates a malfunction. Urgently contact a CITROËN dealer.If the warning lamp is on fi xed, the position is confi rmed.If the warning lamp is on fi xed, the position is confi rmed.
Lighting of the SERVICE warning lamp accompanied by a message an d a sound signal indicates a functioning anomaly. In this case :
- a marked snatching may be felt when selecting R for reverse gear,- the gearbox is locked on a gear,- do not exceed 100 km/h (approx. 60 mph).
Urgently contact a CITROËN dealer.
Sequential mode with manual gear changing
Position of the selector for manual gear changing.
- Move the selector to position M.
- Pull the lever “+” to change up a gear.
- Pull the lever “-” to change down a gear.
A U T O M A T I C G E A R B O X S E Q U E N T I A L M O D E
Observations :
- If the vehicle stops or reduces speed (for example when ap-proaching a stop sign), the gear-box changes down automatically to fi rst gear.
- In sequential mode, it is not necessary to release the accel-erator during gear changes.
- A request to change gear is ac-cepted only if the engine speed permits it.- For safety reasons, depending on the engine speed, a change up or down may be performed automatically.
- It is possible at any time to move from position D (driving in auto-matic mode) to position M (driv-ing in sequential mode) or vice versa.

AII
67
The electronic parking brake com-bines 2 operational modes :
- AUTOMATIC :
Automatic application when the engine stops and automatic re-lease on use of the accelerator (automatic operation by default),
- MANUAL :
Permanent manual application / release of the parking brake is possible by pulling control A.
AUTOMATIC OPERATION
To start the vehicle
The electronic parking brake re-leases automatically and pro-gressively when you press the accelerator :
- with a manual gearbox (manual gearboxmanual gearboxfi rst gear or reverse gear engaged), press down fully on the clutch pedal then press on the accelera-tor pedal and move off.- with an automatic gearbox, ac-celerate with the selector in posi-tion D, M or R.- with an electronic gearbox, ac-celerate with the selector in posi-tion A, M or R.
To immobilise the vehicle
Immobilisation, engine off
With the vehicle stationary, the park-ing brake is automatically applied when the engine is switched off.
E L E C T R O N I C P A R K I N G B R A K E
Full release of the parking brake is confi rmed by :
- the extinction of warning lamp Pon control A and on the instru-ment panel,
- the display of a message “park-ing brake released” on the multi-function display.
Before leaving the vehi-cle, check that warning lamp P on the instrument panel is permanently lit.
Never leave a child alone inside the vehicle with the ignition on, as they could release the park-ing brake.
The application of the park-ing brake is confi rmed by :
- the lighting of warning lamp P on control A and on the instrument panel,
- the display of a message “park-ing brake applied” on the multi-function display (except DT).
Note: an operation sound will confi rm to you the application/re-lease of your electronic parking brake.