automatic Citroen C4 PICASSO 2008 1.G Owner's Manual

Page 1 of 266

IN BRIEF
I
4
E X T E R I O R
Panoramic glass roof
Xenon directional headlamps
Whether on dipped beams or main beams, this func-tion allows your headlamps to follow the direction of the road ahead.
Opening rear screen
Pneumatic rear suspension
The rear pneumatic suspen-sion enhances driving comfort and maintains a constant body height whatever the vehicle load.
Exterior side lighters
These light up the zones fac-ing the driver’s and passen-ger’s doors.
Front/rear parking assistance
Sensors located in the bumpers detect obstacles.
Parking space sensor
Measures the size of a space and informs you of the possi-bility of parking.
Exterior rear view mirrors
With electric foldback.
Automatically tilts in reverse gear.

Page 8 of 266

I
11
D A S H B O A R D
Driver’s air conditioning controls
Manual and automatic gearbox controls
Automatic electronic parking brake controlInstrument panel Passenger’s air conditioning controls
Scented air freshener
Refrigerated storage
Radio-CD
Fixed centred controls steering wheel
Gear control leversSelector

Page 10 of 266

A
1
2
1
2
IN BRIEF
I
13
G E T T I N G S T A R T E D
Adjusting the steering wheel
The steering wheel can be adjusted in terms of height and reach.
Unlock the steering wheel by pull-ing control A towards you.
Adjust the position of the steer-ing wheel then lock it pushing the control back fully.
Automatic photochromic interior rear view mirror
This modifi es its role automatically and progressively between day use and night use.
It can be deactivated using control 1.
Child mirror (2)
This allows you to monitor the rear passengers. It can be folded away to eliminate dazzle.
Rear view mirrors adjustment
This operates with the ignition switched on.
From the driver’s seat, select the rear view mirror by moving control 1 to the left or right, then adjust the rear view mirror as required in the 4 directions using control 2.
Demisting-deicing of the rear view mirrors is linked to that of the rear screen.
Rear view mirrors foldback
When the vehicle is parked, the rear view mirrors can be folded back either manually or automati-cally.For safety reasons, these ad-justments must not be carried out whilst driving.

Page 12 of 266

4
3
2
1
AB
3
2
1
0
4
A
B
C
D
E
F
IN BRIEF
I
15
D R I V I N G
LIGHTING CONTROL
Ring A
1 Off
2 Automatic lighting
3 Sidelamps
4 Dipped beams / Main beams
Ring B
Front foglamps
Rear foglamps
Windscreen wiper
3 Rapid wipe.
2 Normal wipe.
1 Intermittent wipe.
0 Off.
4 Automatic wipe by pressing downwards, and single wipe.
Note : To deactivateautomatic wipe :
- go to position 1, then return to position 0.
Rear screen wipe
Stop.
Intermittent.
Timed wash and wipe.
A Warning lamps for direction indicators and vehicle lamps
B Audio system controls
C Multifunction display controls
D Horn
E Optional function controls
F Cruise control and speed limiter

Page 13 of 266

+–
IN BRIEF
I
16
D R I V I N G
(6-Speed) electronic gearbox system
R Reverse
N Neutral
A Automatic mode
M Manual mode
Using control levers + and - :
- Gear changing in manual mode
- Temporary manual operation in automatic mode.
To start
(6-Speed) electronic gearbox system
- Check that you are in neutral (position N).
- Press fi rmly on the brake pedal and turn the ignition key.
Position Position
Automatic gearbox
P Park
R Reverse
N Neutral
D Automatic mode
M Sequential mode
Using control levers + and - :
- Gear changing in sequential mode
- Temporary manual operation in automatic mode.
To start
Automatic gearbox
- Check that you are in position Por N and turn the ignition key.
Note : To exit position P, press on the brake pedal before moving the selector.
ControlControl
Position selector

Page 14 of 266

A
A
IN BRIEF
I
17
D R I V I N G
Electronic parking brake
This device combines :
- automatic functions :
Automatic application when the engine stops and automatic re-lease on use of the accelerator (automatic operation by default) ;
- manual use :
Permanent manual application / release of parking brake is pos-sible by pulling control A.
Navidrive Multifunction display
Before leaving the vehicle, check that the electronic parking brake warning lamp P (red) is perma-nently on.If you leave the vehicle with the engine running, manually apply the parking brake.Never leave a child alone inside the vehicle with the ignition on, as they could release the park-ing brake.
Parking space sensor
You can select the “parking space sen-sor” function by pressing on button A. Once the space has been measured, the function displays the following messages :
Warning lamps displaylamps displayWarning lamps displayps disInstrument panelpanelpanel
Multifunction display
Instrument panel
Parking possible
Parking diffi cult
Parking not advised
Hill start assist
To aid starting on a gradient, your vehicle is equipped with a system which keeps it immobilised for about 2 seconds, the approximate time it takes to move your foot from the brake pedal to the accel-erator pedal.

Page 15 of 266

IN BRIEF
I
18
Air recirculation, automatic (depending on version)
Automatic comfort regulation
Air
conditioning
Rapid deicing / demisting of front and rear windows and rear view mirrors
Adjustment and display of temperature(comfort requirement)
REST function REST(retention of ventilation with (retention of ventilation with the engine switched off)the engine switched of
Adjustment of air blower speed
Adjustment of air distribution
Mode of adjustment for rear passengers
Black panel function (extinction of air conditioning displays and button backlighting)
Deicing / demisting of rear screen and rear view mirrorsAdjustment of air blower speed
DRIVER’S AND PASSENGER’S CONTROL PANEL REAR PASSENGERS’ CONTROL
PANEL
V E N T I L A T I O NA u t o m a t i c a i r c o n d i t i o n i n g
With additional air conditioning (no warm air distribution)
Temperature adjustment

Page 17 of 266

A
IN BRIEF
I
20
M O N I T O R I N G
Seat belts not fastened / unfastened warning lamp
This warning lamp informs you if the driver’s or front passenger’s seat belt is not fastened (depend-ing on model), and if the front pas-senger’s (depending on model) or the second- and third-row passen-gers’ seat belts are unfastened. The lit up positions represent those whose seat belts are not fastened / unfastened.
Locking from inside
You can use electrical central locking or unlocking by pressing on button A.
If one of the doors is open or is not closed properly, central lock-ing will not work.
Anti-intrusion security
When starting the engine, the sys-tem automatically locks the doors once you reach approximately 10 km/h (approximately 6 mph).
Tyre defl ation detection
This function warns you if a tyre is defl ated or punctured.
This system does not absolve the driver of the need to regularly check the tyre pressures.
The SERVICE warning lamp lights up, and a ve-hicle outline is displayed, accompanied by a mes-sage and a sound signal.
Defl ation warning
The STOP warning lamp lights up, and a vehicle outline is displayed, ac-companied by a message and a sound signal.
Puncture

Page 23 of 266

II
A N T I - I N T R U S I O N A L A R M
OPERATION OF THE ALARM
First make sure all the doors are closed.
The alarm is armed by pressing button A on the re-mote control.
With the alarm armed, the protections are active after 5 seconds (perimeter) and 45 seconds (volumetric).
When the alarm is armed (on standby), any intrusion will trigger the siren for 30 seconds, accompanied by the direction indicators lighting up.
The alarm then goes back on standby, but the trigger-ing remains memorised and is signalled by the rapid fl ashing of the warning lamp on control 1 after you have deactivated the alarm with a press on the un-locking button B. The fl ashing stops when you switch on the ignition.
The siren is also triggered if there is a cutting of the electrical supply. To stop it, restore the electrical sup-ply then press on the unlocking button B.
Note :
• If you want to lock your vehicle without arming the alarm, just lock with the key only.
• If you try to lock your vehicle but a door, or the boot, is still open, the central locking does not operate but the alarm will arm itself after approx. 45 seconds. You will hear a rebound sound coming from the locks.
Note : The siren is automatically deactivated (for ex-ample for disconnecting the battery) as soon as the vehicle is unlocked using the remote control
Deactivation of the volumetric detection
You can operate the alarm with perimeter protection only, by deactivating the volumetric protection (if for example you wish to leave an animal in the vehicle).
For this, switch off the ignition then immediately press button 1 for at least one second.
The warning lamp on button 1 should come permanent-ly on. It will start to fl ash when the alarm is armed.
Arm the alarm by locking your vehicle with the remote control.
It is recommended to disarm the volumetric detection when you use an automatic car wash, to prevent ran-dom triggering of the alarm.
Automatic activation (depending on country)
The alarm is armed automatically, 2 minutes after the last door, or the boot, has been closed.
In order to prevent the alarm from triggering when you open one of the doors or the boot, it is essential to press the unlocking button B again on the remote control.

Page 34 of 266

II
35
Imperative stop warning lamp
When this warning lamp comes on, it is essential to stop the ve-hicle and switch off the engine. Contact a CITROËN dealer with-hicle and switch off the engine. hicle and switch off the engine.
out delay.
Warning lamp for low brake fl uid level and braking distribution malfunction
When the engine is running, this warning lamp, always in associa-tion with the STOP warning lamp, indicates that the brake fl uid level is low.
If the warning lamp has come on, stop immediately and contact a CITROËN dealer (See “Brakes”).stop immediately and contact a stop immediately and contact a
Seat belt non-fastening warning lamp (on NaviDrive instrument panel)
Seat belt non-fastening/ unfastening warning lamp
This warning lamp informs you if the driver’s or front passenger’s seat belt is not fastened (depending on model), and if the front passenger’s (depending on model) or the sec-ond- and third-row passengers’ seat belts are unfastened. The lit up po-sitions represent those whose seat belts are not fastened / unfastened. Depending on model, the front passenger seat may be fi tted with a presence sensor ; the corre-sponding warning lamp will only come on if the seat is occupied and the seat belt not fastened.
Driver’s and front passenger’s seat belts not fastened :
- The warning lamp lights up be-tween 0 and 20 km/h. Above 20 km/h (approx. 12 mph), it fl ash-es accompanied by a screen mes-sage and a sound signal for around 120 seconds.Rear passengers’ or front passen-ger’s seat belt not fastened with-out presence sensor :
- When the ignition is switched on, the points corresponding to the seat positions with seat belts not fastened remain lit up for 30 seconds.
Automatic electronic parking brake warning lamp
If this warning lamp comes on per-manently, it is confi rming that the parking brake is applied.
If it fl ashes, it is indicating an ap-plication or release fault. Urgently contact a CITROËN dealer (See plication or release fault. Urgently plication or release fault. Urgently
“Automatic electronic parking brake”).
Battery charge warning lamp
This warning lamp lights up for a short time when you start the engine. It should go off when the engine is running. If it comes on permanently, urgently contact a CITROËN dealer.permanently, urgently contact a permanently, urgently contact a
Automatic electronic parking brake fault warning lamp
This warning lamp comes on if there is a malfunction in the auto-matic electronic parking brake.
Warning lamp for deactivation of the automatic functions of the automatic electronic parking brake
This comes on if the “automatic application” and “automatic re-lease” functions when you switch off the engine are deactivated or faulty.
W A R N I N G L A M P S

Page:   1-10 11-20 21-30 31-40 41-50 ... 80 next >