Citroen C4 PICASSO DAG 2007.5 1.G Service Manual

123
M
JLH
O
R
K
N
L
J
H
MR
O
42
II
The display of certain types of in-
formation is sometimes by scroll -
ing and sometimes by alternation.
Controls
O -
Access to the « Main Menu »
J or M - Scrolling in the screen
menus
L - Validation and Selection
in the menus of the func-
tion chosen or the value
modified
H -
Cancellation of the opera -
tion or return to the previous
display
R - Selection of the type of in -
formation to be displayed
in zone 2 (date, radio/CD
and trip computer)
K or N - Within the Menus, choice
of activation/deactivation
of functions and selection
of adjustments Main Menu
By pressing on the button
O, then
using buttons J or M , you have ac-
cess to the following functions :
• Radio-CD (see Radio-CD)
• Vehicle configuration , to acti-
vate/deactivate :
- operation of the rear wiper
- automatic guide-me-home light -
ing (according to version)
-
electronic parking brake automatic
functions (application / release)
- door selectivity
-
lighting of daytime-running lamps
(according to country).
• Options , for display of alert mes -
sages
• Display adjustments , for alter-
ing the date and the time on the
displays
• Languages , for choosing the
display language
• Units , giving you access to the
choice of units of Temperature
and units of Fuel Consumption
M U LT I F U N C T I O N S C R E E N A
It is recommended that the driver
should not manipulate the controls
described below while the vehicle
is in motion.
1 - Time
2 - Date and display zone
3 - Outside temperature
When the outside temperature is
between +3 °C and -3 °C, the dis -
play of temperature flashes (ice
risk).
Note : The outside temperature
displayed may be greater than the
actual temperature if the vehicle is
parked in bright sunlight.

L
J
H
MR
O
M
JLH
O
R
K
N
II
43
M U LT I F U N C T I O N S C R E E N A
To activate/deactivate the automatic guide-me-home
lighting :
1. Press on O.
2. Use J or M to select the sub-menu for configuration of your vehicle,
then confirm your choice with a press on L.
3. Select guide-me-home lighting, by pressing J or M.
4. The system tells you whether the function status is active or in
active.
Modify this status with a press on K or N.
5. Validate with a press on L.
To activate/deactivate the electronic parking brake automatic
functions :
1. Press on O.
2. Use J or M to select the sub-menu for configuration of your vehicle,
then confirm your choice with a press on L.
3. Select electronic automatic parking brake by pressing J or M.
4. The system tells you whether the function status is active or in
active.
Modify this status with a press on K or N.
5. Validate with a press on L.
PERSONALISATION and
CONFIGURATION
To activate/deactivate rear
screen wipe when you engage
reverse gear :
1.
Press on O.
2. Use J or M to select the sub-
menu for personalisation-con -
figuration of your vehicle, then
confirm your choice with a
press on L.
3. Select rear wipe by pressing J
or M.
4. The system tells you whether
the function status is active
or inactive. Modify this status
with a press on K or N.
5. Validate with a press on L.

L
J
H
MR
O
M
JLH
O
R
K
N
44
II
M U LT I F U N C T I O N S C R E E N A
To activate/deactivate door selectivity :
1. Press on O.
2. Use J or M to select the sub-menu for configuration of your vehicle, then confirm you
r choice with a press
on L.
3. Select the access point by pressing J or M.
4. The system tells you the status of the doors/tailgate. Modify
this status with a press on K
or N.
5. Validate with a press on L.
To activate/deactivate lighting of daytime-running lamps (ac cording to country) :
1. Press on O.
2. Use J or M to select the sub-menu for configuration of your vehicle, then confirm you
r choice with a press
on L.
3. Select lighting of daytime-running lamps by pressing J or M.
4. The system tells you the status (active/inactive) of this function
. Modify this status with a press K
or N.
5. Validate with a press on L.

L
J
H
MR
O
M
JLH
O
R
K
N
II
45
M U LT I F U N C T I O N S C R E E N A
To display the log of
alerts :
1. Press on O.
2. Use J or M to select the sub-
menu for options. Confirm with
two presses on L.
Note : You can cancel the start
of the display by pressing button
R to abandon and validating by
pressing L.
Alerts, signalled previously but not
resolved, will scroll in the display
for recall. To adjust the date and the time :
1.
Press on O.
2. Use J or M to select the sub-
menu for Display Adjustments,
then confirm by pressing L.
3.
Press J or M to select what you
want to modify : year, month, day,
hour, minutes, mode of display.
4. Make your adjustment by press -
ing K or N. You can continue
your adjustments by selecting a
different element by presses on
J or M. When you have finished
your adjustments, press L. To choose the language :
1.
Press on O.
2. Use J or M to select the sub-
menu for Languages. Confirm
your choice with a press on L.
3. With presses on K or N, select
the language of your choice,
then validate with a press on L.
To choose units :
1. Press on O.
2. Press J or M to select the sub-
menu for Units. Confirm your
choice with a press on L.
3. Press J or M to select the type
of unit you wish to modify (Tem -
perature or Fuel Consumption).
4. With presses on K or N, select
the unit of your choice, then
validate with a press on L.
Note : This choice concerns all the
information (Consumption - Speed)
appearing on the displays.

123
L
J
H
MR
O
46
II
M U LT I F U N C T I O N S C R E E N C
Main Menu
Press on the button O to view the
«Main Menu» of the multifunction
screen. This menu gives you ac -
cess to the following functions :
It is recommended that the driver
should not manipulate the controls
described below while the vehicle
is in motion.
1 -
Time
2 - Outside temperature
3 - Date and display zone
When the outside temperature is
between +3 °C and -3 °C, the dis-
play of temperature flashes (ice
risk). Radio-CD
(See Radio-CD)
Trip computer,
for :
- Entering the distance to your destination
- Access to the log of alerts (recall of alerts signalled previously)
- Access to the status of functions, such as automatic headlamps
and windscreen wipe. Personalisation -
Configuration, for
activating/
deactivating :
- operation of the rear wiper
- automatic guide-me-home lighting
- Xenon dual-function directional headlamps
-
electronic parking brake automatic
functions (application / release)
- door selectivity
- lighting of daytime-running lamps
and for choosing :
- brightness intensity, time, date and units
- the display language
Bluetooth
® hands-free kit
(See Radio-CD)
Note : The outside temperature
displayed may be greater than the
actual temperature if the vehicle is
parked in bright sunlight.
Controls
O
- Access to the «Main Menu»
J or M - Scrolling in the screen
menus
L - Validation and Selection
in the menus of the func-
tion chosen or the value
modified
H - Cancellation of the opera-
tion or return to the previ-
ous display
R - Selection of the type of in-
formation to be displayed
permanently (date, radio-
CD, trip computer) on the
right of the screen

L
J
H
MR
O
M
JLH
O
R
K
N
II
47
PERSONALISATION and
CONFIGURATION
To activate/deactivate rear
screen wipe when you engage
reverse gear :
1. Press on O.
2. Use J or M to select «Person -
alisation-Configuration», then
confirm your choice with a
press on L.
3. Then select the sub-menu for
vehicle parameters. Confirm
your choice with a press on L.
4. Using J or M, select «park -
ing assistance». Confirm your
choice with a press on L.
5. Then by pressing L, select/
deselect triggering of rear
screen wipe in reverse gear,
to activate/deactivate this.
6. Validate with «OK» on the dis-
play.
TRIP COMPUTER
To enter the distance to be
travelled in the trip computer :
1. Press on O.
2. Use J or M to select the icon
for the trip computer, then con -
firm your choice with a press
on L.
3. Press J or M to select entry of
distance. Confirm your choice
with a press on L.
4. To choose the distance, select
the figure you wish to modify
via J or M, then confirm your
choice with a press on L.
5. Using J or M, adjust the value
then validate with a press on L.
6. Validate with «OK» on the dis -
play.
To access the log of alerts in
the trip computer:
1. Press on O.
2. Use J or M to select the icon
for the trip computer, then con -
firm your choice with a press
on L.
3. Select the log of alerts.
4. When you see the list displayed,
scroll down using J or M.
5. Press on H, to return to the
permanent display.
To access the status of functions,
proceed in a similar manner. To activate/deactivate the
automatic guide-me-home
lighting :
1.
Press on O.
2. Use J or M to select «Person -
alisation-Configuration», then
confirm your choice with a
press on L.
3. Then select the sub-menu for
vehicle parameters. Confirm
your choice with a press on L.
4. Using J or M, select «lighting
and signalling». Confirm your
choice with a press on L.
5. Then by pressing L, select/
deselect «guide-me-home light -
ing» to activate/deactivate this.
After activation, choose its du -
ration : press on L, then use J
or M to select the duration and
then press on L.
6. Validate with «OK» on the dis-
play.
M U LT I F U N C T I O N S C R E E N C

L
J
H
MR
O
48
II
3. Then select the sub-menu for
vehicle parameters. Confirm
your choice with a press on L.
4. Using J or M, select «access
to the vehicle». Confirm your
choice with a press on L.
5. Then by pressing L, select the
status of the vehicle access
as desired.
6. Validate with «OK» on the dis-
play.
To activate/deactivate lighting
of daytime-running lamps
(according to country) :
1. Press on O.
2. Use J or M to select «Person-
alisation-Configuration», then
confirm your choice with a
press on L.
3. Then select the sub-menu for
vehicle parameters. Confirm
your choice with a press on L.
4. Using J or M, select «lighting
and signalling». Confirm your
choice with a press on L.
5. Then by pressing L, select/
deselect «daytime-running
lamps» to activate/deactivate
the function.
6. Validate with «OK» on the dis-
play.
To activate/deactivate the
Xenon dual-function directional
headlamps :
1.
Press on O.
2. Use J or M to select «Person-
alisation-Configuration», then
confirm your choice with a
press on L.
3. Then select the sub-menu for
vehicle parameters. Confirm
your choice with a press on L.
4. Using J or M, select « driv-
ing assistance ». Confirm your
choice with a press on L.
5. Then by pressing L, select/
deselect Xenon dual-function di-
rectional headlamps to activate/
deactivate them.
6. Validate with «OK» on the dis-
play.
M U LT I F U N C T I O N S C R E E N C
To activate/deactivate
the electronic parking
brake automatic functions
(application/release) :
1. Press on O.
2. Use J or M to select «Person-
alisation-Configuration», then
confirm your choice with a
press on L.
3. Then select the sub-menu for
vehicle parameters. Confirm
your choice with a press on L.
4. Using J or M, select « driving
assistance ». Confirm your
choice with a press on L.
5. Then by pressing L, select/
deselect «automatic parking
brake» to activate/deactivate
the electronic parking brake
automatic functions (applica-
tion/release).
6. Validate with «OK» on the dis-
play.
To activate/deactivate the door
selectivity :
1. Press on O.
2. Use J or M to select «Person-
alisation-Configuration», then
confirm your choice with a
press on L.

L
J
H
MR
O
M
JLH
O
R
K
N
II
49
To choose the units :
1. Press on O.
2. Use J or M to select «Person -
alisation-Configuration», then
confirm your choice with a
press on L.
3. Select the display configuration
using J or M. Confirm with a
press on L.
4. Then select the sub-menu for
units. Confirm your choice
with a press on L.
5. Using J or M, select the unit
you wish to modify (Tempera -
ture or Consumption), then
validate by pressing L.
6. Validate with «OK» on the dis-
play.
Note : This choice concerns all the
information (Consumption - Speed)
appearing on the displays.
To adjust the date and the time :
1.
Press on O.
2. Use J or M lto select «Person -
alisation-Configuration», then
confirm your choice with a
press on L.
3. Select the display configuration
using J or M». Confirm with a
press on L.
4. Select the adjustment for the
date and the time, using J or
M . Confirm with a press on L.
5. Press J or M to select the
values you wish to modify.
Confirm your choice with a
press on L.
6. Make your adjustments by
pressing J or M, validating
each adjustment choice by
pressing L.
7. Validate with «OK» on the dis -
play.
M U LT I F U N C T I O N S C R E E N C
To choose the language :
1. Press on O.
2. Use J or M to select «Person -
alisation-Configuration», then
confirm your choice with a
press on L.
3. Make your choice of language,
using J or M.
4. Using J or M, select the lan -
guage and validate your choice
with a press on L.
5. Validate with «OK» on the dis-
play.

L
J
H
MR
O
M
K
O
RHJL
N
12345
50
II
H - Cancellation of the opera-
tion or return to the previ -
ous display
R - Selection of the type of in-
formation to be displayed
permanently (date, radio-
CD, trip computer) on the
right of the screen
Main Menu
Press on the button O to view the
«Main Menu» of the multifunction
screen.
This menu gives you access to
the following functions :
Trip computer
(See NaviDrive instructions)
Directory
(See NaviDrive instructions)
Telematics
(See NaviDrive instructions)
Configuration, for adjusting
various parameters (date,
time, units)
(See NaviDrive instructions)
Map
(See NaviDrive instructions)
Video
(See NaviDrive instructions)Navigation/guidance
(See NaviDrive instructions)
Audio
(See NaviDrive instructions)
It is recommended that the driver
should not manipulate the controls
described below while the vehicle
is in motion.
1 - Outside temperature
2 - Directory
3 - Date
4 - Telephone
5 - Time
When the outside temperature is
between +3 °C and -3 °C, the dis-
play of temperature flashes (ice
risk).
Note: The outside temperature
displayed may be greater than the
actual temperature if the vehicle is
parked in bright sunlight.
Controls
O -
Access to the «Main Menu»
J or M - Scrolling in the screen
menus
L -
Validation and Selection in
the menus of the function
chosen or the value modified
M U LT I F U N C T I O N S C R E E N D T

II
51
Multifunction screen A
The trip computer gives you 5 types
of information accessible by succes-
sive presses on the control stalk.
• Range
• Instantaneous consumption
• Distance travelled
• Average consumption
• Average speed
To cancel the display of the trip
computer information, press a fifth
time.Multifunction screens C and
DT
The trip computer gives you ac-
cess to 3 types of instantaneous
information :
- Range
- Instantaneous consumption
- Distance remaining to be travelled
It also gives you access to 3 types
of information for two Journeys
1 and 2 :
- The distance travelled
- The average consumption
- The average speed
The Journeys
Journeys 1 and 2 are independent
of each other but identical in use.
For example they allow you to al-
locate journey 1 for daily calcula-
tions and journey 2 for monthly
calculations.
Setting a Journey to zero
When the relevant Journey is dis-
played, give a long press on the
end of the wiper control stalk.
To access display and selection
of the various types of informa-
tion, give short presses on the
end of the windscreen wiper con-
trol stalk.
For multifunction screen C and DT,
a press on the «Mode» button will
display the trip computer informa-
tion permanently.
To reset the trip computer infor-
mation to zero
, press continuously
for a few seconds on the end of the
control stalk when one of the types
of information is displayed.
T R I P C O M P U T E R