bulb Citroen C4 PICASSO RHD 2013 1.G Owner's Manual

Contents
2
Hazard warning lamps 222
Horn 222
Emergency or assistance call 223
Warning triangle 223
Tyre under-infl ation detection 224
ESC system 227
Seat belts 230
Airbags 235
Child seats 241
ISOFIX mountings 252
Child lock 259
Safety
Te m p o r a ry puncture repair kit 260
Changing a wheel 268
Snow chains 278
Changing a bulb 279
Changing a fuse 288
12 V battery 295
Energy economy mode 298
Changing a wiper blade 299
To w i ng the vehicle 300
To w i ng a trailer 302
Roof bars 304
Very cold climate screen 306
Accessories 307
Practical information
Bonnet 310
Petrol engines 311
Diesel engines 312
Fuel 313
Misfuel prevention (Diesel) 315
Running out of fuel (Diesel) 317
Checking levels 318
Checks 321
Checks
Petrol engines 323
Petrol weights 324
Diesel en
gines 325
Diesel weights 328
Dimensions 331
Identifi cation markings 333
Technical data
Emergency or assistance 335
Touch screen tablet 337
Audio and telematics
Visual search
Lighting controls 202
Automatic illumination of headlamps 207
Automatic headlamp dipping 208
Daytime running lamps 210
Headlamp adjustment 211
Directional lighting 213
Wiper controls 214
Screenwash 216
Automatic rain sensitive wipers 217
Courtesy lamps 219
Panoramic sunroof 220
Interior mood lighting 221
Visibility
Alphabetical index

202
Visibility














Exterior lighting controls
Main lighting
The various front and rear lamps of the vehicleare designed to adapt the driver's visibility progressively according to the climaticconditions:
- sidelamps, to be seen,
-
dipped beam headlamps to see without dazzling other drivers,
- main beam headlamps to see clearly when
the road is clear.



Additional lighting
Other lamps are provided to meet the requirements of particular driving conditions:


- rear foglamps,

- front foglamps with cornering lighting,

- directional headlamps for improved
v
isibility when cornering,

- daytime running lamps to be more visibleduring the day,

- guide-me-home and welcome lighting to
facilitate access to the vehicle,

- parking lamps as vehicle position markers.


Programming

The setting of some functions can be adjusted:


- automatic illumination of headlamps,

- Automatic headlamps,

-
guide-me-home lighting,

- welcome lighting,

- cornering lighting,

- directional lighting.

In some weather conditions (e.g. low temperature or humidity), the presence of misting on the internal sur face of theglass of the headlamps and rear lampsis normal; it disappears after the lamps have been on for a few minutes.




Tr a v e l l i ng abroad
Halogen headlamps
For motoring in countries that driveon the other side of the road, it isnecessary to adapt the adjustment of the dipped beams so as to not dazzlethe drivers of approaching vehicles.
Contact a CITROËN dealer or qualified workshop.Xenon headlamps
The design of the dipped beamheadlamps allows you to drive in acountry that drives on the other side of the road, without the need for any modification.In the event of the failure of one or morebulbs, a message advises you to checkthe lamp(s) in question. S
ystem for selection and control of the various front and rear lamps providing the vehicle's lighting.

279
7
Practical information











Changing a bulb

For H7 type bulbs with lugs... take care to observe their correct installation so asto ensure the best lighting performance.


Risk of electrocution

Xenon bulbs (D5S-25W) must be replaced by a CITROËN dealer or aqualified workshop.



Front lamps
Model with xenon headlamps
1.Directional dipped beam headlamps(D5S-25W).2.Main beam headlamps(H7-55W).3.Daytime running lamps / sidelamps (6 light emitting diodes - LEDs).4.Direction indicators(6 light emitting diodes - LEDs).5.Front foglamps(H11- 55W).
Model with halogen headlamps
1.Dipped beam headlamps (H7-55W).2.Main beam headlamps (H7-55W).3.Daytime running lamps/sidelamps(4 light emitting diodes - LEDs).4.
Direction indicators (PWY24W).5.Foglamps(H11- 55W).

In some weather conditions (e.g. low temperature or humidity), the presence of misting on the internal surface of the glass of the headlamps and rear lampsis normal; it disappears after the lamps have been on for a few minutes.



Changing the light emitting diode-LED lamps

For replacement, contact a CITROËN dealer or qualified workshop.

280
Practical information
Directional dipped beam
headlamps (xenon model)





Main beam headlamps (xenon model)
)Remove the protective plastic cover bypulling the tab.)Push the connector. )Remove the bulb and change it.
For reassembly, carry out these operations in
reverse order.

D5S xenon bulbs must be changed by a CITRO

281
7
Practical information
Dipped beam headlamps (halogen model)
)
Remove the protective plastic cover by
pulling the tab.
) Push the connector. )
Remove the bulb and change it.
For reassembly, carry out these operations in reverse order.
Main beam headlamps(halogen model)
) Turn the protective plastic cover to
remove it. ) Disconnect the connector. )
Release the clips. )
Remove the bulb and change it.
For reassembly, carry out these operations in reverse order.
Daytime running lamps / sidelamps

For the replacement of this type of LED lamp
and lighting guides, contact a CITROËN dealer or a qualified workshop.
A replacement kit for the LEDs is available fromCITROËN dealers.

282
Practical information
The direction indicator bulb is located below thefront lamp. )Turn the bulb holder a quar ter turn anti-clockwise. )Remove the bulb holder. )Change the failed bulb.For reassembly, carry out these operations in reverse order.

Direction indicators Front foglamps
)Unclip the finisher by pulling at the top.)Remove the two screws to remove the unit. )Turn the bulb holder a quar ter turn. )Remove the bulb holder. )Change the failed bulb.
For reassembly, carry out these operations in
reverse order, pressing on the finisher to refit it.


Faster flashing of a direction indicator warning lamp (left or right) indicates afailed bulb on that side.
Direction indicators (lightemitting diodes - LED)

For the replacement of this type of lamp, contact a CITROËN dealer or a qualified
workshop.

283
7
Practical information
You should contact a CITROËN dealer or a qualified workshop for the replacement of the
light emitting diode - LED.
Door mirror spotlamps
Integrated direction indicator
side repeaters
You should contact a CITROËN dealer or a qualified workshop for the replacement of these bulbs.
1. Direction indicator
(PY21W amber).2. Sidelamp / foglamp (P21/5W).
Rear lamps


Changing the light emitting diode-LED lamps

For replacement, contact a CITROËNdealer or qualified workshop.
3. Brake lamp / sidelamp (light emittingdiodes-LED).4. Reversing lamp (W16W).5. Direction indicator (PY21W).
Model with LED lamps
3. Brake lamp / sidelamp (P21/5W).4. Reversing lamp (W16W).5. Direction indicator (PY21W).

Model with conventional bulb lamps

284
Practical information
Lamps on the tailgate
Model with LED lamps
Identi
fy the failed bulb.)Open the boot.)Remove the access cover.
Model with conventional bulb lamp
s
) Remove the three lamp fixing screws A . )
Disconnect the lamp connector. )
Carefully remove the lamp from the outsideby pressing the retaining clip B.
)Turn the bulb holder a quarter of a turnanti-clockwise and pull the bulb out.)Change the bulb.
For reassembly, carry out these operations in
reverse order.

285
7
Practical information
1. Direction indicator (PY21W amber).2. Sidelamp / foglamp (P21/5W).
Rear lamps
3. Sidelamp (light emitting diodes-LED).4. Brake lamp (light emitting diodes-LED).5. Direction indicator (PY21W).6. Reversing lamp (light emitting
diodes-LED).
Model with LED lamps
3. Sidelamp (P21/5W).4. Brake lamp / sidelamp (P21/5W).5. Direction indicator (PY21W).6. Reversing lamp (P21W).
Model with conventional bulb lamps

286
Practical information
















Lamps on the tailgateModel with LED lamps
Model with conventional bulb lam
ps
Identify the failed bulb.)Open the boot.)Remove the access cover.
) Remove the three lamp fixing screws A.)
Disconnect the lamp connector. )
Carefully remove the lamp from its housing. )
Turn the bulb holder a quar ter of a turn
anti-clockwise and pull the bulb out.
) Change the bulb.
For reassembly, carry out these operations in reverse order.