navigation Citroen C4 RHD 2012 2.G Owner's Manual

8
INTERIOR


Interior mood lighting
This dimmed lighting of the passenger
compartment improves visibility inside
the vehicle when the light is poor.



109


6-speed electronic gearbox system
This system offers driving combining
a fully automatic mode and a manual
mode.



151

Massage function
This system provides a lumbar mas-
sage for a period of 60 minutes.
The massage is done in 6 cycles of
10 minutes.



74

Audio and communication systems

These systems benefi t from the following
technologies: radio, CD player, USB player,
Bluetooth system, satellite navigation sys-
tem with colour screen, auxiliary sockets.

Radio




277
eMyWay satellite navigation system



225



Electric parking brake
It combines the functions of auto-
matic application on switching off the
engine and automatic release when
moving off.
Manual application and release re-
mains possible.



142

11
FAMILIARISATION
ROOF CONSOLES - CENTRE CONSOLES




A.
Rear view mirror.

B.
Emergency call/Warning lamps
display for front passenger’s airbag
and seat belt/Assistance call.

C.
Courtesy lamp/Map reading lamps/
Interior mood lighting.

D.
Microphone for audio and telematic
system.

E.
Panoramic sunroof blind control.




1.
Central adjustable air vents.

2.
Monochrome screen and small
storage box with fl ap or colour and
mapping screen.

3.
Audio system or eMyWay satellite
navigation system.

4.
Central switch panel.

5.
Heating/air conditioning controls.

6.
USB port/auxiliary Jack socket and
cigarette lighter/12 V accessory
socket.

7.
Gear lever, manual or automatic
gearbox.

8.
Manual parking brake.

9.
Portable ashtray.

10.
Large open storage or front armrest.

18
MONITORING


Side switch panel
Multifunction steering wheel


Cruise control/speed limiter
controls



167, 165


Optional functions controls


1.
Black panel (black screen).


49

2.
Dashboard lighting dimmer.

49
or
Control of the instrument panel central
screen associated with the satellite
navigation system.

57

3.
Courtesy lamp on/off.

108
or
Parking space sensors.

169


Audio system controls



228, 279


Bluetooth system or telephone
controls



228, 279

Illumination of the warning lamp indi-
cates the state of the system.


A.
Deactivating the ESP/ASR system.

133

B.
Deactivating the parking sensors.

171

C.
Deactivating the Stop & Start sys-
tem.


158

D.
Activating the blind spot sensors.

161

E.
Switching on the electric child lock.

129

F.
Deactivating the volumetric alarm
monitoring.

86

1
MONITORING
31















CUSTOMISABLE COLOUR INSTRUMENT PANEL ASSOCIATED WITH THE SATELLITE NAVIGATION
SYSTEM


1.
Rev counter (x 1 000 rpm or tr/min).

2.
Gear effi ciency indicator with manual
gearbox or gear lever position and
gear for the electronic gearbox sys-
tem or automatic gearbox.

3.
Speedometer (mph or km/h).


Dials and screens


4.
Central screen associated with the
satellite navigation system.

5.
Fuel gauge and associated low fuel
level warning lamp.

6.
Trip mileage recorder (miles or km).

7.
Service spanner (if a service is due
or missed),
total mileage recorder.
(miles or km)


A.
Dial COLOUR: customisation of the
background colour of the dials.

B.
Screen COLOUR: customisation of
the background colour of the screens.

C.
Dashboard lighting dimmer (in night
mode).

D.
Start a manual test (procedure for
checking the status of systems and
display of vehicle alerts).
Reset service indicator or trip mileage
recorder.



Control buttons

1
MONITORING
32


1.
Cruise control or speed limiter settings.


2.
Engine oil level indicator.
Reminder of servicing information.
These functions are displayed suc-
cessively on switching on the igni-
tion, after the welcome sequence
and before display of the available
active functions.
Alert or information messages may ap-
pear temporarily.

Central screen associated with
the satellite navigation system




Rev counter

Approaching the maximum engine speed,
the bars are displayed in red and fl ash, to
indicate to you the need to change up a
gear. Rotation of the thumb wheel, located on
the left of the steering wheel, allows the
permanent display to be selected from
the available active functions (trip com-
puter, navigation-guidance...).

1
MONITORING
33









Warning and indicator lamps

Visual indicators which inform the driver of the occurrence of a malfunction (warn-
ing lamp) or of the operation of a system (operation or deactivation indicator
lamp).

When the ignition is switched on
Certain warning lamps come on for a few seconds when the ignition is switched on.
When the engine is started, these warning lamps should go off.
If they remain on, before moving off, refer to the information on the warning lamp in
question.

Associated warnings
The illumination, fi xed or fl ashing, of certain warning lamps may be accompanied
by an audible signal and a message in the multifunction screen or in the instru-
ment panel central screen associated with the satellite navigation system.

Warning lamps

When the engine is running or the vehicle is being driven, the illumination of one of the follow-
ing warning lamps indicates a malfunction which requires action on the part of the driver.
The warning comes on in the instrument panel or appears in the instrument panel central
screen associated with the satellite navigation system.
If your vehicle has a screen, a
warning lamp coming on is al-
ways accompanied by the dis-
play of an additional message,
to assist you in identifying the
problem.
If you encounter any problems,
do not hesitate to contact a
CITROËN dealer or a qualifi ed
workshop.



Warning lamp



is on



Cause



Action/Observations








STOP


fi xed, alone
or associated
with another
warning lamp,
accompanied by
an audible signal
and a message in
the screen. Illumination of this warning
lamp is associated with
a serious braking system,
power steering, engine
lubrication or cooling system
malfunction or a punctured
tyre. Stop as soon as it is safe to do so as
there is a risk that the engine will cut out
while driving.
Park, switch off the ignition and contact a
CITROËN dealer or a qualifi ed workshop.






Maximum
coolant
temperature


fi xed red. The temperature of the
cooling system is too high. Stop as soon as it is safe to do so.
Wait until the engine has cooled down
before topping up the level, if necessary.
If the problem persists, contact a
CITROËN dealer or qualifi ed workshop.

1
MONITORING
46

Service overdue
For a few seconds after the ignition is
switched on, the spanner fl ashes
to
indicate that the service must be car-
ried out as soon as possible.

Example:
the service is overdue by
180 miles (300 km).
For a few seconds after the ignition is
switched on, the screen indicates:
A few seconds after the ignition is switched
on, the distance recorder resumes its nor-
mal operation. The spanner remains on
.

The distance remaining may be
weighted by the time factor, de-
pending on the type of driving.
Therefore, the spanner may also
come on if you have exceeded
the two year service interval.







Service indicator zero reset
This operation cannot be carried
out while a reminder of the ser-
vicing information is being dis-
played.
Following this operation, if you
wish to disconnect the battery,
lock the vehicle and wait at least
fi ve minutes for the zero reset to
be registered.

Recalling the service information
You can recall the service information
at any time.


)
Briefl y press the ".../000"
trip dis-
tance recorder zero reset button.
The service information is displayed
for a few seconds, in the total dis-
tance recorder line or in the instru-
ment panel central screen associated
with the satellite navigation system.

After each service, the service indicator
must be reset to zero.
The procedure for resetting to zero is
as follows:


)
switch off the ignition,

)
press and hold the ".../000"
trip dis-
tance recorder zero reset button,

)
switch on the ignition; the distance re-
corder display begins a countdown,

)
when the screen indicates "=/0"
and
the spanner disappears, release the
button.

1
MONITORING
47





















Manual test in the instrument panel
central screen associated with the
satellite navigation system
This function allows you to check the
status of the vehicle systems (reminder
of the "activated"/"deactivated" status
of the confi gurable functions) and to
display the alerts log.


)
With the engine running, to start
a manual test, briefl y press the
".../000"
button on the instrument
panel. The following information appears suc-
cessively in the instrument panel cen-
tral screen:


- engine oil level indicator (see corre-
sponding section),

- service indicator (see correspond-
ing section),

- under-infl ation detection (if your
vehicle is fi tted with this system; see
the "Safety" section),

- current warnings and alert messag-
es, if any (see corresponding sec-
tion for the warning lamp or system
concerned),

- status of confi gurable functions (see
"Multifunction screens").
This information also appears every
time the ignition is switched on (auto-
matic test).

1
MONITORING
50
In the instrument panel, you can change
the colour of its dials (button A
) indepen-
dently from that of the screens (button B
).
There are fi ve colour variants, from
white to blue.


)
press the appropriate button as
many times as needed to obtain the
desired colour.
This menu allows you to choose a fam-
ily of polyphonic sounds from the four
available. These sounds are grouped
together in a family and are adapted
to suit the situation and context (alert,
confi rmation, rejection, direction indica-
tors, lighting left on, key in ignition...).






Customising the instrument
panel colours





Customising the polyphonic
sounds
For safety reasons, these opera-
tions are only possible when sta-
tionary.
For the customisable colour
instrument panel with audio system


)
Press the "MENU"
button for ac-
cess to the main menu.

)

Select the "Personalisation-confi guration"
menu and confi rm.


)
Select the "Choice of sounds" line
and confi rm.

)
Select the desired family of sounds
and confi rm.

)
Save the modifi cations by confi rming
"OK".
For the customisable colour
instrument panel associated with
the satellite navigation system


)
Press the thumb wheel for access
to the main menu.

)
Select the "Choice of sounds" line
and confi rm.

)
Select the desired family of sounds
and confi rm.

)
Save the modifi cations by confi rming
"OK".
For safety reasons, the driver
must only carry out these opera-
tion when stationary.

2
MULTIFUNCTION SCREENS
56






















COLOUR SCREEN AND MAP

From the navigation system control
panel, to select one of the applications:


)
press the dedicated "RADIO"
,
"MUSIC"
, "NAV"
, "TRAFFIC"
,
"PHONE"
or "SETUP"
button for
access to the corresponding menu,

)
turn the dial A
to select a function,
an item in a list,

)
press button B
to confi rm the
selection,
or

)
press the "ESC"
button to abandon
the current operation and return to
the previous display.
For more information on these applica-
tions, refer to the "Audio and Telematics"
section.


Controls
"SETUP" menu




)
Press the "SETUP"
button for ac-
cess to its menu. You can choose
from the following functions:


- "Display confi guration",

- "Voice synthesis".



Display confi guration
This menu is used to set the bright-
ness of the screen, the screen colour
scheme and the date and time.

Voice synthesis
This menu is used to adjust the volume
for guidance messages and to select
the type of voice (male or female).
For safety reasons, confi gura-
tion of the multifunction screen
by the driver must only be done
when stationary.


Displays in the screen

It displays the following information au-
tomatically and directly:


- time,

- date,

- altitude,

- ambient temperature (the value dis-
played fl ashes if there is a risk of ice),

- parking sensor information,

- audio functions,

- directory and telephone information,


- satellite navigation system information.