jack points Citroen C5 2008.5 (RD/TD) / 2.G Owner's Manual

166
P R A C T I C A L I N F O R M A T I O N
Removing a wheel

 Park the vehicle on stable, fi rm
ground that is not slippery. apply
the parking brake.

 If your vehicle is equipped with
"Hydractive III+" suspension,
with the engine running at idle,
adjust the ground clearance to
its maximum height.

 Switch off the ignition and en-
gage fi rst gear or reverse gear
depending on any slope (for a
vehicle with automatic gearbox,
select position P).

 If your vehicle is fi tted with
"Hydractive III+" suspension,
position the chock, whichever di-
rection the gradient may be in, in
front of the front wheel diametri-
cally opposite to the one to be
replaced.
 Position the jack at one of the
four jacking-points provided
on the underbody close to the
wheels, then use the wheelbrace
to unwind the jack until it reaches
the ground.

 Remove the protector from each
bolt using tool 3 .

 Slacken the wheel bolts.
Before positioning the
jack:

 Always adjust the vehicle’s
ground clearance to the "maxi-
mum height" position and re-
tain this adjustment for as long
as the jack is under the vehi-
cle (do not use the hydraulic
adjustments),

 Immobilise your vehicle on hori-
zontal, stable and non-slippery
ground,

 Ensure that any passengers
have left the vehicle and are in
a safe place .
Never get underneath the vehicle if
it is supported only by the jack.
The jack and all of the tools are
specifi c to your vehicle. Do not use
them for any other applications.
Have the original wheel repaired
and refi tted as soon as possible.

 Continue to extend the jack until
the wheel is a few centimetres
off the ground.

 Undo the bolts, remove the
wheel.