ESP Citroen C5 RHD 2011.5 (RD/TD) / 2.G User Guide

III
55
COMFORT

2a-2b. Temperature adjustment
Control via the manual controls


)
Press one of the controls, with
the exception of temperature
regulation 2a
and 2b
. The indi-
cator lamps A
in the "AUTO"

controls go off.
It is possible to adjust one or more
functions manually while leaving the
other functions in automatic mode.
Switching to manual mode may re-
sult in discomfort (temperature, hu-
midity, odour, condensation) and
may not provide optimum comfort.
To return to "AUTO"
mode, press
controls 1a
and 1b
. The indicator
lamps A
come on.
3a-3b. Air distribution adjustment


)
Press control
3a
to change
the distribu-
tion of the air
fl ow on the
driver's side.

)
Press control 3b
to change the
distribution of the air fl ow on the
passenger's side.
The indicator lamps corresponding
to the distribution chosen come on:


- Windscreen and front side win-
dows.

- Front ventilation (central and
side vents and air diffusion grille
if open) and rear ventilation.

- Front and rear footwells.
Simultaneous display of the distribu-
tion of air to the windscreen and side
windows and of front and rear venti-
lation is not possible.

)
Turn control 2a
to change the
temperature on the driver's side
and control 2b
to change the
temperature on the passenger's
side: to the right to increase the
temperature or to the left to re-
duce it.
The setting required is displayed.
The value indicated on the display
corresponds to a level of comfort
and not to a temperature in degrees
Celsius or Fahrenheit, depending on
the screen confi guration.
A setting around the value 21
usu-
ally provides optimum comfort.
However, depending on your re-
quirements, a setting between 18
and 24 is normal.
On entering the vehicle, the interior
temperature may be much colder (or
warmer) than is comfortable. There
is no need to change the tempera-
ture displayed in order to quickly
obtain the level of comfort required.
The automatic regulation of the air
conditioning will use its maximum
performance settings to correct the
temperature difference as quickly as
possible.

III
64
COMFORT
This function provides the driver with
a back massage. It only operates
when the engine is running.


)
Press on button A
.
The warning lamp comes on and the
massage function is activated for a
period of 1 hour. During this time,
massage is performed in cycles of
6 minutes (4 minutes of massage fol-
lowed by 2 minutes break). In total,
the system will perform 10 cycles.
After 1 hour, the function is deacti-
vated. The warning lamp goes out.






Massage function




Welcome function

The welcome function assists entry
and leaving the vehicle.
After switching off the ignition and
opening the driver’s door, the seat
moves back automatically and then
stays in this position, ready for the
next entry to the vehicle.
When switching on the ignition, the
seat moves forward to the memo-
rised driving position.
When moving the seat, take care
that no person or object hinders the
automatic movement of the seat.
This function is deactivated by de-
fault. You may activate or deactivate
this function using the "Main Menu"
on the instrument panel screen. To
do so, select "Vehicle parameters/
Comfort/Driver welcome".

Deactivation
You can deactivate the massage
function at any time by pressing on
button A
.











Heated seats control


With the engine running, the front
seats can operate separately.


)
Use the corresponding adjust-
ment dial, placed on the outer
side of each front seat, to switch
on and select the level of heating
required:

0
: Off.

1
: Low.

2
: Medium.

3
: High.

III
65
COMFORT












Storing driving positions

System which stores the settings of
the driver's seat and air conditioning.
Up to two positions can be stored
using the buttons on the side of the
driver's seat.
Storing a position

Using buttons M/1/2


)
Switch on the ignition.

)
Adjust your seat.

)
Press button M
, then press but-
ton 1
or 2
within four seconds.
An audible signal confi rms that the
settings have been stored.
Storing a new position cancels the
previous position.

Recalling a stored position

Ignition on or engine running


)
Briefl y press button 1
or 2
to re-
call the corresponding position.
An audible signal indicates the end
of the adjustment.
When the ignition is on, after a few
consecutive position recalls, the
function will be deactivated until the
engine is started, to prevent dis-
charging of the battery.
For your safety, avoid storing a
driving position while driving.









REAR HEAD RESTRAINTS

The rear head restraints can be
removed and have two positions:


- high, position for use,

- low, storage position.
To raise a head restraint, pull it up-
wards.
To lower it, press the lug then the
head restraint.
To remove it, place it in the high posi-
tion, push the lug and pull it upwards.
To r efi t it, engage the head restraint
rods in the holes taking care to re-
main in line with the seat back.
Never drive with the head restraints
removed, they must be in place and
correctly adjusted.

III
66
COMFORT











REAR SEATS

Bench seat, the left-hand (2/3) or
right-hand (1/3) section of which
can be folded to adapt the boot load
space.

Removing the seat cushion



)
Move the corresponding front
seat forwards if necessary.

)

Raise the front of the seat cushion 1
.


)
Tilt the seat cushion 1
fully
against the front seat.

)
Remove the seat cushion 1
from
its fi xings by pulling upwards.



Refitting the seat cushion



)
Position the seat cushion 1
verti-
cally in its fi xings.

)
Fold down the seat cushion 1
.

)
Press on the seat cushion to
secure it.



Folding the seat

In order to fold a rear seat without
any risk of damage, always start
with the seat cushion, never with
the seat back:



)
move the corresponding front
seat forwards if necessary,

)

raise the front of the seat cushion 1
,


)
tilt the seat cushion 1
fully against
the front seat,

)
check that the seat belt is posi-
tioned correctly on the side of
the seat back,

)
lower or remove the head re-
straints if necessary,

)
pull the control 3
forwards to re-
lease the seat back 2
,

)
tilt the seat back 2
.
The seat cushion 1
can be removed
to increase the loading volume.


Returning the seat back to its
original position
When returning the rear seat to its
original position:


)
put the seat back 2
in the upright
position and secure it,

)
fold the seat cushion 1
,

)
refi t the head restraints or put
them back in place.
When returning the rear seat to its
original position, take care not to trap
the seat belts and ensure that their
buckles are positioned correctly.
The red indicator on the control 3

should no longer be visible; if it is,
push the seat fully back.

III
67
COMFORT





MIRRORS


Door mirrors

Each fi tted with an adjustable mirror
glasses providing the lateral rear-
ward vision necessary for overtaking
or parking. They can also be folded.

Adjustment
With the ignition on:


)

move control A
to the right or to
the left to select the corresponding
mirror,

)
move control B
in all four direc-
tions to adjust,

)

return control A
to the central position. Demisting/defrosting of the door
mirrors is associated with that of
the rear screen.


Folding


)
from outside; lock the vehicle
using the remote control or the
key.

)
from inside; with the ignition on,
pull control A
rearwards.
If the mirrors are folded using con-
trol A
, they will not unfold when the
vehicle is unlocked. Control A
must
be pulled again.

Unfolding


)
from outside; unlock the vehicle
using the remote control or the
key.

)
from inside; with the ignition on,
pull control A
rearwards.
If the position is changed manually,
a long press on control A
re-engages
the mirror.
The folding and unfolding of the door
mirrors using the remote control can
be deactivated by a CITROËN dealer
or a qualifi ed workshop.
The objects observed are, in reality,
closer than they appear.
Take this into account in order to
correctly judge the distance of ve-
hicles approaching from behind.







Rear view mirror

Adjustable mirror providing a central
rearward view.
Equipped with an anti-dazzle sys-
tem, which darkens the mirror glass:
this reduces the nuisance to the
driver caused by the headlamps
from following vehicles, low sun...


Manual day/night model

Adjustment


)

Adjust the mirror so that the glass is
directed correctly in the "day" position.



Day/night position


)
Pull the lever to change to the
"night" anti-dazzle position.

)
Push the lever to change to the
normal "day" position.


As a safety measure, the mirrors
should be adjusted to reduce the
"blind spot".

V
88
VISIBILITY














EXTERIOR LIGHTING
CONTROLS
Control stalk for the selection and con-
trol of the various front and rear lamps
providing the vehicle's lighting.

Main lighting

The various front and rear lamps of
the vehicle are designed to adapt
the driver's visibility progressively in
relation to the climatic conditions:


- sidelamps, to be seen,

- dipped beam headlamps to see
without dazzling other drivers,

- main beam headlamps to see
clearly when the road is clear.



Additional lighting

Other lamps are fi tted to fulfi l the re-
quirements of particular driving con-
ditions:


- a rear foglamp to be seen from a
distance,

- front foglamps for even better
forward vision,

- directional headlamps for im-
proved visibility when cornering,

- daytime running lamps to be
seen during the day.



Programming

Various automatic lighting control
modes are also available depending
on options:


- guide-me-home lighting,

- automatic illumination of head-
lamps,

- directional lighting.



Manual controls

Lamps off.





Automatic illumination of
headlamps.
Sidelamps only.
Dipped headlamps or
main beam headlamps.

B.
Stalk for switching headlamps:
pull the stalk towards you to switch the lighting between dipped and
main beam headlamps.
In the lamps off and sidelamps
modes, the driver can switch on the
main beam headlamps temporarily
("headlamp fl ash") by maintaining a
pull on the stalk.

Displays

Illumination of the corresponding indi-
cator lamp in the instrument panel con-
fi rms that the lighting selected is on.
The lighting is controlled directly by
the driver by means of the ring A

and the stalk B
.
A.
Main lighting mode selection ring:
turn it to position the symbol re-
quired facing the mark.
In some weather conditions (e.g.
low temperature or humidity), the
presence of misting on the inter-
nal surface of the glass of the
headlamps and rear lamps is nor-
mal; it disappears after the lamps
have been on for a few minutes.

V
89
VISIBILITY









C.
Foglamps selection ring.
The foglamps operate with the side-
lamps and the dipped and main
beam headlamps.


-
1 st turn forwards: rear foglamps on.


- 1 st turn rearwards: rear foglamps off.




- 1st turn forwards: front foglamps on.


- 2nd turn forwards: rear foglamps on.


- 1st turn rearwards: rear foglamps off.


- 2nd turn rearwards: front foglamps
off.



Model with rear foglamps
only
Model with front and rear
foglamps





In good or rainy weather, both day
and night, use of the front foglamps
and the rear foglamps is prohibited.
In these situations, the power of their
beams may dazzle other drivers.
They should only be used in fog or
falling snow.
In these weather conditions, it is
your responsibility to switch on the
foglamps and dipped headlamps
manually as the sunshine sensor
may detect suffi cient light.
Do not forget to switch off the front
and rear foglamps when they are
no longer needed.

Lighting left on
When a front door is opened with
the ignition off and in manual ligh-
ting mode, an audible signal warns
the driver if the vehicle's lighting is
still on.
In this case, switching off the ligh-
ting stops the audible signal.
With the ignition off, if the dipped
headlamps remain on, they will
switch off automatically after thirty
minutes to prevent discharging of
the battery.

V
97
VISIBILITY
In lighting on mode, different light-
ing times are available:


- with the ignition off, approxi-
mately ten minutes,

- in energy economy mode, ap-
proximately thirty seconds,

-
with the engine running, unlimited.



Map reading lamps



)
With the ignition on, press the
corresponding switch.



Panoramic sunroof rear
reading lamps (Tourer)
With the key in position or with the
ignition on:


)
Press the corresponding switch.
The reading lamp concerned comes
on for ten minutes.
The rear reading lamps come on:


- when the key is removed from
the ignition,

- when the vehicle is unlocked.
They switch off gradually:


- when the vehicle is locked,

- when the ignition is switched on.

VI
106
FITTINGS

Installation


)
fold down the backs of the rear
seats,

)
position the high load retaining
net roller above the two rails 1

located behind the rear seats
(2/3 bench seat). The two notch-
es 2
must be placed above the
two rails,

)
slide the two rails 1
into the
notches 2
and push the roller
(lengthways) from right to left to
secure it,

)
reposition the rear seat backs.

Row 1
Row 2
To use it in row 1:


)
fold down the
backs of the
rear seats,

)
open the cov-
ers 3
of the
corresponding
upper fi xings,

)
unroll the high load retaining net
and position one of the ends of
the net's metal bar in the cor-
responding fi xing cover. Check
that the hook is secured in the
rail located inside the cover 3
,

)
pull the high load retaining net's
metal bar to position the other
hook in the second fi xing cover.
To use it in row 2:


)
open the cov-
ers 4
of the
corresponding
upper fi xings,

)
from the rear bench seat, unroll
the high load retaining net, push-
ing it to detach it from the retaining
hooks,

)
position one of the ends of the
net's metal bar in the corre-
sponding fi xing cover. Check
that the hook is secured in the
rail located inside the cover,

)
position the other hook in the
second fi xing cover and pull the
metal bar towards you.

VIII
118
SAFETY

Punctured tyre


automatic detection


detection on request


Automatic detection:
A message indicates which tyre is
punctured.

Driver request detection:
The vehicle outline indicates the
punctured tyre(s).
The message is accompanied by
illumination of the STOP
warning
lamp and an audible beep.



Wheel not monitored


automatic detection


detection on request


Automatic detection:
A message indicates to you which
wheel is not monitored.

Driver request detection:
The vehicle outline indicates the
wheel(s) which is/are not monitored.


)
The message is accompanied
by illumination of the SERVICE

warning lamp and an audible
beep. have it checked by a
CITROËN dealer or a qualifi ed
workshop. The defl ation detection system is a
driving aid, but which does not ab-
solve the driver from the need to be
vigilant and responsible.
This system does not dispense
with the requirement to check
the tyres on a regular basis (see
"Identifi cation markings") to ensure
optimum vehicle behaviour and to
avoid premature tyre wear under
certain conditions (high load, high
speed).
Do not forget to check the tyre
pressure of the spare wheel .
Any repair or replacement of a tyre
on a wheel that is equipped with
a sensor must be carried out by
a CITROËN dealer or a qualifi ed
workshop.
The system may suffer from tem-
porary interference caused by
electro-magnetic transmissions on
frequencies close to that use by
the system .




)
If you have fi tted wheels that
are not equipped with tyre defl a-
tion detection (wheels with snow
tyres, etc.), contact a CITROËN
dealer or a qualifi ed workshop.