engine Citroen C6 DAG 2007 1.G Owner's Manual

II
55
BA
D
N
F
KK
G
H
E
IJ
L
C
M
IN BRIEF
A. Key release / storage.
B. Locking of the vehicle.C. Unlocking of the vehicle.D. Guide-me-home lighting.
E.Manual dipstick.F.Screen wash and headlamp wash fl uid.
G. Power steering and suspension oil.
H. Engine coolant.
I. Engine oil.
J. Brake fl uid.
K. Air fi lter.
L. Poles “+” and “-” for starting with a slave battery.
See “Starting with a slave battery”.
Press on button M to the left of the dashboard to open the fuel fi ller fl ap.
Opening and attaching the fuel cap N.
REMOTE CONTROL KEYUNDER THE BONNETFUEL TANK
40133148
Tank capacity: approxi-
mately 72 litres
O P E N I N G

I
8
IN BRIEF
68
114
36-38
72
8555
INTERIOR
Head-up display
This device projects a range of impor-tant information into the driver's fi eld of vision. In this way, the driver does not need to take his eyes off the road.
Speed limiter
This driving assistance device allows you to select a maximum speed that you do not wish to exceed.
Cruise control
This system allows you to automati-cally maintain the vehicle speed at the value programmed by the driver, with-out the need to press the accelerator.
The automatic gearbox
This device provides you with optimum driving conditions by combining a fully automatic mode, along with two spe-cifi c programmes, as well as a manual mode.
Audio and communication systems
This equipment utilises the latest tech-nology: MP3 compatible RD4 radio, Bluetooth®nology: MP3 compatible nology: MP3 compatible radio with navigation, JBL au-®
dio system.
Electric parking brake
The electric parking brake combines automatic locking when the engine is stopped, and automatic unlocking when accelerating (devices a cti-vated by default).Note: Manual locking/unlocking is possible.
Automatic air conditioning
This air conditioning system ensures comfort and a suffi -cient circulation of air in the cabin.

II
1515
1
2
3
4
1
2
3
4
A
IN BRIEF
This system allows you to main-tain a constant vehicle speed pro-grammed by the driver.1. “CRUISE” button: Activation/deactivation of cruise control mode.2. Suspension or reactivation of cruise control.3. “SET +” button: Increase of the memorised speed.4. “SET -” button: Reduction of the memorised speed.
CRUISE CONTROLSPEED LIMITER
This system allows you to choose a maximum speed that you do not wish to exceed.1. “LIMIT” button: Activation of speed limiter mode.2. Disengagement of the maxi-mum speed.3. “SET +” button: Activation of the maximum speed.4.“SET -” button: Reduction of the maximum speed.
To quit a parking space
With the engine running, release the electric parking brake, by pressing the brake pedal or the accelerator pedal and pulling then releasing the control A.
To park
With the vehicle stationary, operate the parking brake by pulling then releasing the control A.
ELECTRIC PARKING BRAKE
383672
Note: It is not possible to release the electric parking brake if the key is removed or in position S.
Note: Function may be activated at speeds over 30 km/h (18 mph).Cruise control is available in the higher gears only, for speeds greater than 40 km/h (24 mph).
D R I V I N G

II
1919
A
STOP
KJIHGFE
DB
B
CA
ML
B
IN BRIEF
Note:When the ignition is switched on, the orange and red warning lamps light up.When the engine is running, these warning lamps should go out.
If any warning lamps remain lit, refer to the Ifrelevant page.

26
II
C
S I G N A L L I N G
Front foglamps on
Front foglamps and rear foglamps on
Rotate the ring C forwards.
Switching off
First action rearwards, rear foglamps off.
Second action rearwards, front and rear foglamps off.Note: the foglamps should be used only in fog or in other conditions of poor visibility.
FRONT AND REAR FOGLAMPS (RING C)
Lighting
With dipped/main beams on:
Rotate the ring C forwards.
DAYTIME-RUNNING LAMPS
These come on automatically when the engine is running:If the function is activated in the IfMain Menu. See “Multifunction display”.
Provided the lighting control stalk is on position 0 and all the headlamps are off.
If the daytime-running lamps are active, the sidelamps will also be on (depending on country specifi -cation).

28
II
1
3
2
F R O N T S E A T S
ADJUSTMENT OF THE BACKREST ANGLE
Action the control 1 and adjust the angle of the backrest.
It is possible to tilt the backrest 45° forwards until it locks. To unlock it, press control 1.
ADJUSTMENTS TO THE HEIGHT AND ANGLE OF THE HEAD RESTRAINT
To raise it, pull upwards.
To lower it, press on the control 2 to unlock it, and simultaneously on the head restraint itself.
To adjust the angle of the head restraint, tilt it forwards or rearwards at the bottom.
To raise it, press control 2 to unlock it, then pull it upwards.
CONTROLS FOR THE HEATED SEATS
The front seats can be heated independently of each other . On the con-trols for the heated seats 3 located on the outer side of the seats, rotate the knob to select any of three heat intensities:
0: Off.
1: Slight heat.
2: Medium heat.
3: Maximum heat.
Note: The heated seats only operate when the engine is running.
SEAT HEIGHT AND SLIDE ADJUSTMENTS
See following page.

31
II
23
1
S E A T B E L T S W A R N I N G L A M P
OPERATION
The driver's and the front and rear passengers' seats have sensors that detect non-fastening/unfas-tening of the seat belts.
The fastened/non-fastened status of the seat belts for each type of seat is indicated by the illumination or fl ashing of the warning lamps 1, 2 and 3.
FUNCTIONING OF THE SYSTEM OF DETECTION
Driver's and front passenger's seats
When you switch on the ignition:If the driver's seat belt is not fastened, the warning lamp If1 illuminates in the instrument panel.If the passenger's seat belt is not fastened, the warning lamp If3 lights up.
Above 20 km / h (12 mph), the warning lamp fl ashes for non-fasten ing/unfas-tening, accompanied by a message and a sound signal for around 2 min-utes. Then the warning lamp(s) 1 and/or 3 remain on.
Rear passengers' seats
When you switch on the ignition, warning lamp 2 lights up to make the driver and any passengers aware.
Once the doors are closed and the engine started, a message tells you the fastening status of the rear belts for 30 seconds.
After this time, if one or more of the rear belts are not fastened:Warning lamp 2 comes on, if your speed is less than around 20 km / h (12 mph).Warning lamp 2 fl ashes, accompanied by a message and a sound signal for about two minutes, if your speed is above around 20 km / h (12 mph).Note:The detection of non-fastening of rear seat belts is deactivated when you switch off the ignition or if one of the vehicle's doors is opened.
A child seat installed on the front passenger's seat may not be detected.

34
II
1
R E A R V I E W M I R R O R S
ELECTRIC EXTERIOR REAR VIEW MIRRORS (CONTINUED)
In reverse gear: adjustment of the indexed positions for the passenger’s and driver’s rear view mirrors
With the engine running:1. Select the (driver's or passenger's) rear view mirror using control 1.2. Engage reverse gear, the mirror glass automatically positions itself to improve your vision of the pavement.3. If necessary, adjust the mirror to your preference using the electric con-trol.
Deactivation of the rear view mirror indexing function
To deactivate the function, move control 1 to the central position.

36
II
13
24
A
B
S P E E D L I M I T E R
SELECTION OF THE SPEED LIMITER
To select the speed limiter, press on button 1 to display in zone A of your instrument panel the symbol B for the speed limiter.
The last speed memorised is also displayed.
TO ADJUST THE MAXIMUM SPEED
Provided the engine is running, you can select your maximum speed, with short or long presses on:Button 3 to increase the speed or
Button 4 to decrease the speed.
Remark:
Successive presses will allow to modify the speed in steps of 1 km / h (1 mph) and a continuous press in steps of 5 km / h (3 mph).
ACTIVATION OF THE MAXIMUM SPEED
When the desired maximum speed is displayed, press button 2 to activate the speed limiter.

37
II
S P E E D L I M I T E R
DEACTIVATION
To deactivate the maximum speed, press button 2.
The information “OFF” will appear in the instrument panel.
This action does not cancel the memorised speed, which remains displayed in the instrument panel.
TEMPORARY OVERRIDE OF THE MAXIMUM SPEED
The accelerator pedal has a switch at the end of its travel. By pressing the pedal hard down to activate this switch at any time you can go faster than the memorised maximum speed.
During the time the limit speed is being exceeded, the disp layed speed fl ashes.
You have only to release the accelerator pedal to return belo w the maximum speed, to restore the function.Note: If during speed limitation the system cannot keep to the maximu m speed (especially on a steep descent or if you accelerate too hard), the speed fl ashes. Adapt your speed as necessary.
The function will re-engage when your speed has returned below the desired maximum.
TO CANCEL THE FUNCTIONGive a long press on button 1.
Or stop the engine.Or
The speed that you chose is memorised. The information disappea rs from the instrument panel.
If there is a malfunction, the memorised speed will fl ash and the warning lamp “OFF” will come on permanently in the display.
Contact a CITROËN dealer.