language Citroen C8 DAG 2008 1.G Owner's Manual

33
II
M U L T I F U N C T I O N D I S P L A Y
D i s p l a y C
Main menu
Press control
A to display the
“Main menu” for the multifunction
screen. Using this menu, you have
access to the following functions:
The driver is advised not to
manipulate the controls described
below while driving.
1 -
Time.
2 - Ambient temperature
3 - Date and Display zone
If the outside temperature is
between +3°C and -3°C, the
temperature display lashes (risk
of ice).
Note: The outside temperature
displayed may be higher than the
actual temperature if the vehicle is
standing in bright sunshine.
Radio-CD
(See radio-CD handbook)Trip computer, giving
you:
- Distance to your
destination.
- Access to log of alerts (list of the alerts that have been previously
signalled).
- Access to the status of functions, for example activation/
deactivation of automatic
headlamp lighting, daytime-
running lamps, ESP, windscreen
wipe.
Personalisation -
Coniguration , allowing
you to activate or
deactivate:
- the triggering of rear wipe
- the automatic guide-me-home lighting
- the automatic lighting of hea- dlamps
- automatic lighting of daytime- running lamps
Also to choose:
- Brightness, the time, the date, units.
- The display language.
Note : activation/deactivation of
automatic lighting of daytime-run-
ning lamps is available depending
on the country of marketing.
Controls
A
- Access to the “Main menu”
B - Scrolling in the display
menus.
C - Validation and Selection in
the menus, of the function
chosen or value modiied
D - Cancellation of the operation
or return to the previous
display.
E - Selection of the type of
information you wish to see
permanently displayed (date,
radio-CD, trip computer) on
the right of the screen

35
II
M U L T I F U N C T I O N D I S P L A Y
D i s p l a y C
To adjust the date and the time:
- Press on
A.
- Use B to select the icon
“Personalisation - Coniguration”
then conirm your choice with a
press on C.
- Select the display coniguration using B. Conirm with a press
on C.
- Select the date and time adjustment, using B, then
conirm with a press on C.
- Use B to select the values to be
modiied. Conirm with a press
on C.
- Make your adjustments using B,
validating each adjustment with
a press on C.
- Validate on “OK” on the display. To choose units:
- Press on
A.
- Use B to select the icon
“Personalisation - Coniguration”
then conirm your choice with a
press on C.
- Select the display coniguration using B. Conirm with a press
on C.
- Then select the sub-menu for Units. Conirm with a press
on C.
- Using B, select the unit to
be modiied (Temperature or
Consumption) then validate with
a press on C.
- Validate on “OK” on the display.
Note: This choice concerns all
the types of information (fuel
consumption, speed, etc.) that
appear on the displays.
To choose the language:
- Press on A.
- Use B to select the icon
“Personalisation - Coniguration”
then conirm your choice with a
press on C.
- Select the choice of language, using B.
- Using B, select the desired
language and validate your
choice with a press on C.
- Validate on “OK” on the display.
To adjust the display
brightness:
- Press on
A.
- Use B to select the icon
“Personalisation - Coniguration”
then conirm your choice with a
press on C.
- Select the display coniguration using B. Conirm with a press
on C.
- Select the adjustment of brightness. Conirm with a press
on C.
- Use B to select normal or other
display mode, then validate
with a press on C. To adjust
the brightness, select the
symbols “+” or “-” and conirm
your adjustment with a press
on C.
- Validate on “OK” on the display.

11 IV
After a lengthy disconnection of the battery, it may be necessa
ry to reinitialise the following functions:
- the electric windows anti-pinch and sequential systems,
- the sun roof anti-pinch system,
- the multifunction display parameters (date, time, language, units of distance and temperature),
- the radio stations,
- the navigation reception (see NaviDrive instructions).
WARNING: if disconnecting the battery, check that the naviga tion reader has inished recording information
after switching off the ignition : the warning lamp should h ave gone out.
Starting the engine for the irst time after disconnecting and
connecting the battery
- Turn the ignition key.
- Wait about a minute before operating the starter to allo
w the electronic
systems to be reinitialised. B A T T E R Y

99
M A I N M E N U
To keep the display clean, it is recommended to wipe with a soft, non-abrasive cloth (e.g. for spectacles) without any cleaning product added.
HOW TO ACCESS THE MAIN MENU ?
Press on the MENU button.
TR AFFIC INFORMATION: TMC in-formation, messages, etc
AUDIO: radio, CD, Jukebox source , options, etc
T E L E M A T I C S : t e l e p h o n e , directory, SIM, services, etc
CONFIGUR ATION: vehicle param-eters, display, time, languages, voice, auxiliary socket, etc
VIDEO: activation, parameters, etc
VEHICLE DIAGNOSIS: log of alerts, etc
NAVIGATION - GUIDANCE: GPS, stages, options, etc
M AP: or ientation, details, display, etc

232323
IIITMC traffi c information consists of messages transmitted by FM radio stations.As opposed to the road information fl ashes broadcast by radio (TA), TMC (Traffi c Mes-sage Channel) messages are coded and silent. You can fi lter the types of information that interest you.Your NaviDrive issues messages written in the selected language (including in a foreign country where your language is not that of the local radio stations).The messages contain:The date and the time of the broadcastthe nature of the incidentthe locationthe namet h e d i r e c t i o n o f t r a f f i c o n t h e a r t e r y concerned.A message is sent when an event occurs. You are again informed of the event when you are coming into proximity. The messages are classed according to the distance of the event from your vehicle.The list of messages is updated every 15 minutes approximately.

515151
VI
A1A2A3
ABCD
A1
A2
A3
B2
D1D2
D1
A4
B1B2B3
D2
A4
B1
B3
C
A
B
D
D3D3
C O N F I G U R A T I O N
A C C E S S I N G T H E M E N U - S T R U C T U R E
The Confi guration menu enables you to programme your NaviDrive as well as certain functions of your vehicle.
WHAT ARE THE FUNCTIONS OF THE CONFIGURATION MENU ?
CONFIGURING THE DISPLAY OF YOUR NAVIDRIVE
Choose the colour of the display.
Adjust the brightness of the display.
Adjust the date and the time and defi ne the format 12H or 24H.
Choose a feminine voice or a masculine voice and adj ust the voice synthesiser volume.
CONFIGURE THE VOICE OF YOUR NAVI DRIVE
CHOOSE THE LANGUAGE OF THE VOICE SYNTHESISER AND OF THE DISPLAY
Activate or deactivate the automatic lighting of head lamps and/or guide-me-home lighting.
DEFINE THE VEHICLE PARAMETERS (ACCORDING TO EQUIPMENT )DEFINE THE V THE
Choose system of measurement: metric or imperial.
Activate or deactivate the voice commands.
Activate or deactivate the audio/video auxiliary inpu t.
Activate or deactivate the automatic triggering of th e rear wiper when you engage reverse gear.
HOW TO ACCESS THE CONFIGURATION MENU ?
Press button MENU.Rotate the control to select the Confi guration icon .Press on the control to validate.