Citroen C8 DAG 2008.5 1.G Owner's Manual

Page 251 of 252

SETUP
LANGUAGE
DSD LANG
SUBTITLE
AUDIO
DISK
VERSION
TV DISPLAY
TV TYPE
ANGLE MARK
SCREEN SAVER
DIGITAL OUTUP
DOWNMIX
DUAL MONO
DYNAMIC
LPCM OUTPUT
CHANGE
DEFAULT PASS 3308
ENTER FORMER PASS 3308
ENTER NEW PASS 4 numbers
CONFIRM PASS xxxx
PARENT
DEFAULT
DISPLAYAUDIOPARENTAL
33083308
xxxx
09
The screen saver appears
approximately 5 minutes after
pressing ON. LT/RT output compatible with
Dolby Surround
DISPLAY FLOW CHARTS
When the system asks you to enter the language manu ally, use the buttons 0 to 9 on the remote control to enter the corresponding digit.
SETUP
LANGUAGE
Dsd Language
Subtitle
Audio
Disk
Version
DISPLAY
TV display
TV type
Angle mark
Screen saver
AUDIO
Digital output
Downix
Dual Mono
Dynamic
LPCM outputPARENTAL
Change
Parent
Default
Default pass
Enter former pass
Enter new pass
Conirm pass
4 digits
23

Page 252 of 252

10
The table below groups together the answers to the most frequently asked questions concerning the roof console display.
FREQUENTLY ASKED QUESTIONS
QUESTION SOLUTION
The player does not work. No reaction
when the ignition is switched on and when
the POWER button is pressed. - Check the vehicle's fuses.
- Press the RESET button.
The player does not react to pressing of the
remote control buttons. - The remote control batteries are lat. Replace the
m with alkaline manganese AAA type batteries.
- The remote control sensor is hampered by objects or is dirty. Remove all objects on the remote control
receiver or clean the surface using a damp cloth.
Image or sound interference while playing
a DVD. The image remains frozen during
play. The player cannot read the disc. The discs may be d
amaged or dirty.
The player does not play the disc inserted. - The format of the disc does not correspond to the speciications of the player.
- If it is cold, condensation may have formed on t he laser. Wait approximately 5 minutes to allow the humidity
to evaporate.
The player operates with no effect
(frozen image). - Switch off the player then switch it back on to r
eturn to normal operation.
- Press the RESET button.
The language is incorrect, the DVD menu
or the subtitles are set once the DVD has
been inserted. Check the output languages on the PREFERENCES menu.
When a DVD/VCD/SVCD is played, the
density of the colours is too weak/too
strong. - Remove the disc.
- Using the 7 or 8 buttons, set the COLOUR value re
quired and insert the disc again.
- To restore the default value, remove the disc and press the DISP button.
24

Page:   < prev 1-10 ... 211-220 221-230 231-240 241-250 251-260