display Citroen DS3 2014 1.G User Guide

43
DS3_en_Chap01_controle-de-marche_ed01-2014
Monochrome screen c
Information displays
F Press the button, located at the end of the wiper stalk , to display the various trip
computer
  tabs   in   succession. -
 
t
he   current   information   tab  
w

ith:
●  
t
he   range,
●  
t
he   current   fuel  
c

onsumption,
●  
t
he   distance   remaining   to  
b

e travelled or the Stop &
Start   time   counter,
-
t
he trip "1"
 
tab   with:
●  
t
he   distance   travelled,
●  
t
he   average   fuel  
c

onsumption,
●  
t
he   average   speed,
 f

or   the   first   trip.
-
t
he trip "2"
 
tab   with:
●  
t
he   distance   travelled,
●  
t
he   average   fuel  
c

onsumption,
●  
t
he   average   speed,
 f

or   the   second   trip.
F  P ressing   the   button   again   returns   you   to  t
he   normal   display.
16/9 colour screen (eMyWay)
Trip zero reset
F When the trip required is displayed, press
the   button   on   the   end   of   the   wiper   stalk   for  
m

ore   than   two   seconds.
Tr i p s "1" and "2" are independent but their use
is
  identical.
For
  example,   trip   "1" can be used for daily
figures,
  and   trip   "2"
 
for   monthly   figures.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2014
A few definitions…
Range
(miles or km)
current fuel consumption
(mpg or l/100 km or km/l)
Stop & Start time
counter
(minutes / seconds or hours / minutes)
This
 
value
 
may
 
vary
 
following
 
a
 
change
 
i

n
 
the
 
style
 
of
 
driving
 
or
 
the
 
relief,
 
r

esulting
 
in
 
a
 
significant
 
change
 
in
 
the
 
c

urrent
 
fuel
 
consumption.
If dashes are displayed continuously
while
 
driving
 
in
 
place
 
of
 
the
 
digits,
 
c

ontact a CITR
oË

N dealer or a
qualified
 w

orkshop.
When
 
the
 
range
 
falls
 
below
 
20
 
miles
 
(30
 
km),
 
d

ashes
 
are
 
displayed.
 
After
 
filling
 
with
 
at
 
least
 
5

 
litres
 
of
 
fuel,
 
the
 
range
 
is
 
recalculated
 
and
 
is
 
d

isplayed
 
when
 
it
 
exceeds
 
60
 
miles
 
(100
 
km).
distance remaining to
destination
(miles or km)
T
his indicates the distance which can still be
travelled
 
with
 
the
 
fuel
 
remaining
 
in
 
the
 
tank
 
in
 
r

elation
 
to
 
the
 
average
 
fuel
 
consumption
 
over
 
t

he
 
last
 
few
 
miles
 
(kilometres)
 
travelled. This
 
is
 
the
 
average
 
fuel
 
consumption
 
during
 
the
 
l

ast
 
few
 
seconds.
This
 
is
 
the   distance   remaining   to   be   travelled  
t

o
 
the
 
final   destination.   It   can   be   entered   by  
t

he user.
If the distance is not entered, dashes are
displayed
  in   place   of   the   digits.
If
 
your
 
vehicle   is   fitted   with   Stop   &   Start,   a   time  
c

ounter
 
calculates   the   time   spent   in   STOP  
m

ode
 
during   a   journey.  
I

t
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on   with   the   key.
distance travelled
(miles or km)
T
his indicates the distance travelled since the
last
 
trip
 
computer   zero   reset.
Average speed
(mph or km/h)
T
his
 
is
 
the   average   speed   calculated   since   the  
l

ast
 
trip
 
computer   zero   reset   (ignition   on).
Average fuel
consumption
(mpg or l/100 km or km/l)
T
his
 
is
 
the
 
average   fuel   consumption   since   the  
l

ast
 
trip
 
computer   zero   reset.
This
 
function   is   only   displayed   from  
20
 
mph
  (30   km/h).

DS3_en_Chap02_ecrans-multifonction_ed01-2014
Monochrome screen A
This displays the following information:
-  t ime,
-


date,
-
 
a
mbient   temperature   (this   flashes   if   there   is  
a

  risk   of   ice),
-

s
tatus of the doors and boot,
-
 
c
urrent   audio   source   (radio,   CD...),
-
 
t
rip   computer   (refer   to   the   "Instruments   and  
c

ontrols"
 s
ection).
-
 
i
nformation   or   alert   messages,
-
 
s
ettings   menus   for   the   screen   and   the  
v

ehicle   systems.
displays in the screen
From the control panel of your Audio system, you   can:
F

p
ress the "MENU"
 
button   to   gain   access   to  
t

he main menu ,
F

p
ress the " 5" or " 6" buttons to scroll
through
  the   items   in   the   screen,
F

p
ress the "MO
dE" 
button   to   change  
t

he   permanent   application   (date,   audio  
s

ource...),
F

p
ress the " 7" or " 8"
  buttons   to   change   a  
s

etting   value,
F

p
ress the "OK"
 
button   to   confirm,
or
F

p
ress the "Back" button to abandon the
operation
  in   progress.
controls
F Press the "MENU"  button   to   gain   access  t
o the main menu , then press the "5" or
" 6 "
  buttons   to   scroll   through   the   various  
m

enus:
-


radio - CD,
-
 
v
ehicle   configuration,
-


options,
-
 d

isplay
 se
ttings,
-
 lan

guages,
-
 un

its.
F

P
ress the "OK"
 
button   to   select   the   menu  
r

equired.
Main menu

DS3_en_Chap02_ecrans-multifonction_ed01-2014
Languages
Once the "Languages" menu has been selected, you   can   change   the   language   used   by   the s

creen   by   choosing   one   from   a   defined   list.
Units
Once the "Units" menu has been selected, you   can   change   the   units   of   the   following  
par

ameters:
-
 
t
emperature   (°C   or   °F),
-
 
f
uel   consumption   (l/100   km,   mpg   or   km/l).
Once
  the   fuel   consumption   units   have  
b

een   set   to   mpg,   the   information   in   the  
i

nstrument   panel   screen   on   speed   and  
d

istance   will   also   be   in   mph   and   miles.
For
 

safety
 
reasons,
 
configuration
 
by
 
the
 d

river   of   the   multifunction   screen   must  
o

nly   be   done   when   stationary.
display settings
Once the "Display settings" menu has been selected,   you   can   gain   access   to   the   following  
se

ttings:
-
year,
-
 
m
onth,
-


d ay,
-


h o u r,
-
 m

inutes,
-
 
1
2   or   24   hour   mode.
F
 
O
nce   you   have   selected   a   setting,   press  
t

he "7" or " 8"
  buttons   to   change   its   value.
F

P
ress the " 5" or " 6" buttons to switch
respectively
  to   the   previous   or   next   setting.
F

P
ress the "OK"
 
button   to   save   the   change  
a

nd   return   to   the   normal   display   or   press  
t

he "Back"
 
button   to   cancel. Setting the date and time
F

P
ress the MENU
 
button.
F
 
S
elect   "Display   settings"   using   the   "5 "
or " 6"
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
S
elect   the   "Year"   function   using   the   "5 "
or " 6"
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
C
hoose   the   desired   value,   using   the   "7 "
or " 8"
  button.
F
Press "OK"
 

to   confirm   the   selection.
F

R
epeat the procedure to set the "Month",
"Day",
  "Hours",   and   "Minutes".

51
DS3_en_Chap02_ecrans-multifonction_ed01-2014
Monochrome screen C
This displays the following information:
-  t ime,
-


date,
-
 
a
mbient   temperature   (this   flashes   if   there   is  
a

  risk   of   ice),
-

s
tatus of doors and boot,
-
 
a
udio   sources   (radio,   CD,   USB   port   /  
a

uxiliary   socket   etc.),
-
 
t
rip   computer   (refer   to   the   "Instruments   and  
c

ontrols"
 s
ection).
-
 
i
nformation   or   alert   messages,
-
 
s
ettings   menus   for   the   screen   and   vehicle  
s

ystems.
displays in the screen
From your Audio system control panel, you can:
F p ress the "MENU"  button   to   gain   access   to  
t

he main menu ,
F

p
ress the " 5" or " 6" buttons to scroll
through
  the   items   in   the   screen,
F

p
ress the "MO
dE" 
button   to   change   the  
p

ermanent   application   (trip   computer,  
a

udio
 s
ource...),
F

p
ress the " 7" or " 8"
  buttons   to   change   a  
s

etting   value,
F

p
ress the "OK"
 
button   to   confirm,
or
F

p
ress the "Back" button to abandon the
operation
  in   progress.
controls
F Press the "MENU"  button   to   gain   access  t
o the main menu :
-
a

udio functions,
-
 
t
he   trip   computer,
-
 pe

rsonalisation-configuration,
-
 
t
elephone   (hands-free   kit).
F

P
ress the " 5" or " 6" buttons to select the
menu
  required,   then   confirm   by   pressing  
t

he "OK"
 
button.
Main menu
Multifunction screens

DS3_en_Chap02_ecrans-multifonction_ed01-2014
With the Audio system switched on, once this menu   has   been   selected   you   can   activate  
o

r   deactivate   the   functions   linked   with   use  
o

f   the   radio   (RDS,   REG,   RadioText),   the   CD  
(

introscan, shuffle, CD repeat) or the MP3
player
  (USB   port   /   auxiliary   socket).
For
  more   information   on   the   "Audio   functions"  
a

pplication,   refer   to   the   "Audio   system"   section.
"Audio functions"
menu"Trip computer"
menu
Once this menu has been selected, you can c
onsult   information   concerning   the   status   of   the  
v

ehicle   (warnings   log,   status   of   functions,   etc.)
Alert log
This summarises the active warning messages, displaying   them   in   succession   in   the  
m

ultifunction
 s
creen.
Status of functions
This summarises the status (active or inactive) of   the   vehicle's   functions.
Enter distance to destination
This allows you to enter an approximate distance   until   your   final   destination. F

P
ress the "MENU"
 
button   to   gain   access  
t

o the general menu
.
F
P
ress the arrows, then the "OK"
button to
select the " Trip computer "   menu.
F
I
n the "
Trip computer "   menu,   select   one  
o

f   the   following   applications:

DS3_en_Chap02_ecrans-multifonction_ed01-2014
Display configuration
Once this menu has been selected, you can gain   access   to   the   following   settings:
-
 b

rightness-video
 s
etting,
-
 
d
ate   and   time   setting,
-
 
s
election   of   units.
Once
  the   fuel   consumption   units   have  
b

een   changed   to   mpg,   the   information  
i

n   the   screen   relating   to   speed   and  
d

istance   also   changes   to   mph   and  
mil

es
 re
spectively. For
 

safety
 
reasons,
 
configuration
 
by
 
the
 d

river   of   the   multifunction   screen   must  
o

nly   be   done   when   stationary.
choice of language
Once this menu has been selected, you can change   the   language   used   by   the   screen   by  
c

hoosing   one   from   a   defined   list.With
  Audio   system   on,   once   this   menu   is  s
elected   you   can   configure   your   Bluetooth  h
ands-free   system   (pairing),   view   the   various  
t

elephone   directories   (list   of   calls,   services...)  
a

nd   manage   your   calls   (call,   hang   up,   second  
c

all,   secret   mode...).
For
  more   information   on   the   "Telephone"  
f

unction,   refer   to   the   "Audio   system"   section.
"Telephone" Menu
Setting the date and time
F Sel ect the " Set date and time" function
using
  the   "5 " or " 6"
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
A
djust   the   settings   one   by   one   using  
the " 7" or " 8"
  button   then   confirm  
with "OK" .
F

T
hen select the "OK"
 
box   in   the   screen  
a

nd   confirm.

55
DS3_en_Chap02_ecrans-multifonction_ed01-2014
16/9 colour screen (eMyWay)
It displays the following information automatically   and   directly:
-
 
t
ime,
-


date,
-


altitude,
-
 
a
mbient   temperature   (the   value   displayed  
f

lashes   if   there   is   a   risk   of   ice),
-
 
c
heck   of   the   doors,
-
 
p
arking   sensors,
-
 
w
arning   and   vehicle   function   status  
m

essages,   displayed   temporarily,
-
a

udio functions,
displays in the screen
To select one of the applications, from the eMyWay   control   panel:
F

p
ress the dedicated "RA
dI
O", "MUSI
c

",
" N AV " , "TR AFFI
c",

"SETUP" or
"PHONE" button for access to the
corresponding
 m

enu,
F
 
t
urn   the   knob   to   change   the   selection,
F
 
p
ress   the   knob   to   confirm   the   selection,


or
F

p
ress the "Back" button to abandon the
current operation and return to the previous
display.
controls
For more information on these applications, r efer to the "eMyWay" section or to the specific
user
  guide   given   to   you   with   the   other   owner's  
d

ocuments.
-
 
t

rip
 
computer
 
information
 
(see
 
the
 
"

Instrument
 
s
 
and
 
controls"
 
section),
-
 
s

atellite
 
navigation
 
system
 
information,
-
 
t

he
 
settings
 
menus
 
for
 
the
 
display
 
screen,
 
t

he
 
navigation
 
system
 
and
 
vehicle
 
systems.
Multifunction screens

DS3_en_Chap02_ecrans-multifonction_ed01-2014
Display configuration
This menu allows you to choose a colour scheme   for   the   screen,   adjust   the   brightness,  
t

he   date   and   time   and   to   choose   the   units  
of
  distance   (km   or   miles),   fuel   consumption  
(

l/100   km,   mpg   or   km/l)   and   temperature  
(

°Celsius
 o
r
 °
Fahrenheit).
dat

e and time
F

P
ress the "SETUP" button.
F

Sel
ect "
di
splay configuration " and press
the
  knob   to   confirm.
F

Sel
ect the " Adjust date and time " function
and
  press   the   knob   to   confirm.
F
 
A
djust   the   settings   one   by   one   using   the  
d

irectional   arrows   then   confirm   by   pressing  
t

he   knob.
Select " Synchronisation of minutes with
GPS "
  so   that   adjustment   of   the   minutes   is   done  
a

utomatically   by   satellite   reception.
Voice synthesis setting
This menu allows you to adjust the volume for navigation   instructions   and   to   choose   the   type  
o

f   voice   (male   or   female).
choice of language
This menu allows you to select the language used   by   the   display   from   a   defined   list.
"SETUP" menu
F Press the "SETUP" button   to   gain   access  t
o   the   configuration   menu.   This   allows   you  
t

o   select   from   the   following   functions:
-
"
di
splay configuration ",
-
"Voice synthesis settings",
-
"
ch
oice of language ",
-
"Vehicle parameters ",
-
"Trip computer ".

DS3_en_Chap04_confort_ed01-2014
Digital air conditioningThe air conditioning operates when the engine is running, as well as in STOP mode with Stop & Start.
Automatic operation
1. Automatic "comfort" programme
Press the "AUTO"  button.  T
he "AUTO"  symbol   is   displayed.
We
  recommend   that   you   use  
t

his   mode.   It   provides   optimised  
a

utomatic
  control   of   all   of   the   following  
f

unctions:
  passenger   compartment  
t

emperature,   air   flow,   air   distribution   and   air  
i

ntake,
 
in
 
accordance   with   the   comfort   value  
t

hat
 
you
 
have   chosen.
This
 
system   is   designed   to   operate   effectively  
i

n
 
all
 
seasons,   with   the   windows   closed. For
  your   comfort,   when   the   engine   is  
s

witched   off,   the   settings   are   retained  
u

ntil   the   engine   is   switched   on   again.
To   prevent   too   great   a   distribution   of  
c

old   air   when   the   engine   is   cold,   the   air  
f

low   will   only   reach   its   optimum   level  
g

radually.
2. Temperature adjustment
The value indicated on the display corresponds
to
  a   level   of   comfort   and   not   to   a   temperature   in  
d

egrees   Celsius   or   Fahrenheit. On
  entering   the   vehicle,   if   the   interior  
i

s very cold or hot, there is no need to
change   the   value   displayed   in   order  
t

o   reach   the   required   level   of   comfort.  
T

he   system   corrects   the   temperature  
d

ifference   automatically   and   as   quickly  
a

s   possible.
Press the " 5" and " 6" buttons to
change
  this   value.   A   setting   around  
t

he value 21
 
enables   optimum  
c

omfort   to   be   obtained.   However,  
d

epending   on   your   requirements,   a  
s

etting   between   18   and   24   is   usual.
3. Automatic "visibility" programme
The automatic comfort programme m
ay   not   be   sufficient   for   rapid  
d

emisting   or   defrosting   of   the  
w

indscreen and side windows
(humidity,
  several   passengers,   ice,   etc.).
In
 
this
 
case,   select   the   automatic   visibility  
p

rogramme.   The   button   3   indicator   lamp  
comes
 
on.
The
 
system   automatically   controls   the   air  
c

onditioning   and   the   flow   of   air   and   provides  
o

ptimum
 
air   distribution   to   the   windscreen   and  
s

ide
 
windows.   It   deactivates   air   recirculation   5.
To
 
exit
 
this   programme,   press   button   3   again  
or "AUTO" ,
  the   indicator   lamp   on   the   button  
g

oes
 
off
 
and   "AUTO"
 
is   displayed.
With
  Stop   &   Start,   when   demisting   has  
b

een   activated,   the   STOP   mode   is   not  
a

vailable.