display Citroen DS3 2014 1.G Service Manual

197
DS3_en_Chap10_info-pratiques_ed01-2014
In the event of a fault with the the ScR emissions control system
If it is a temporary fault, the alert d
isappears   once   the   exhaust   gas  
e

missions   return   to   normal.
A
 
system
 
that
 
prevents
 
engine
 
s

tarting
 
is
 
activated
 
automatically
 
f

rom
 
650 miles
 
(1
 
100
 
km)
 
after
 
c

onfirmation
 
of
 
a
 
fault
 
with
 
the
 
SCR
 
e

missions
 
control
 
system.
 
Have
 
the
 
s

ystem
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
o

r
 
a
 
qualified
 
workshop
 
as
 
soon
 
as
 
p

ossible.
In the event of the detection of a fault
du
ring an authorised driving phase (between
650 miles and 0 miles) (1 100 km and 0 km)
When
  switching   on   the   ignition,   the   UREA,  
S

ERVICE   and   diagnostic   warning   lamps   comes  
o

n,
 
accompanied   by   an   audible   signal   and   the  
d

isplay
 o
f
 a m
essage
 "
Emissions
 f
ault"
 t
o
 s
ignal
 a

 
fault
  with   the   emissions   control   system.If   a   fault   with   the   SCR   system   is   confirmed  
(

after   30   miles   (50   km)   covered   with   the  
p

ermanent   display   of   the   message   signalling  
a

  fault),   when   switching   on   the   ignition,   the  
S

ERVICE
 an
d
 e
ngine
 d
iagnostic
 w
arning
 lam
ps
 c

ome   on   and   the   UREA   warning   lamp   flashes,  a
ccompanied   by   an   audible   signal   and   the  d
isplay   of   a   message   (e.g.:   "Emissions   fault:  
S

tarting   prevented   in   150   miles")   indicating   the  
r

emaining   range   express   in   miles   or   kilometres.
While
  driving,   the   message   is   displayed   every  
3

0   seconds   while   the   fault   with   the   SCR   system  
p

ersists.
You
  should   go   to   a   CITROËN   dealer   or   a  
q

ualified   workshop   as   soon   as   possible.
ot

her wise, you will not be able to restart your
engine.
Practical information

DS3_en_Chap10_info-pratiques_ed01-2014
Freezing of the AdBlue®
additive
The adblue® additive freezes at
temperatures   below   around   -11°C.
The
 
SCR
 
system   includes   a   heater   for  
t

he
a
d
blu

e
® tank.
I
n
 
exceptional   circumstances   (vehicle  
k

ept
 
for
 
a
 
long   period   at   temperatures  
t

hat
 
are
 
constantly   below   -15°C),   an  
e

missions
 
control   system   fault   alert  
m

ay
 
be
 
related   to   freezing   of   the  
a
d
blu

e
® in your vehicle.
P
ark
 
your   vehicle   in   a   warmer   area   for  
a

 
few
 
hours   until   the   additive   becomes  
li

quid
 a

gain.
The
 
emissions   alert   does   not   go   off  
i

mmediately,   it   will   occur   after   several  
m

ile
 
of
 
running.
You
 
have
 
exceeded
 
the
 
authorised
 
d

riving
 
limit:
 
the
 
starting
 
prevention
 
s

ystem
 
inhibits
 
engine
 
starting.
Every time the ignition is switched on, the SERVICE a nd   engine   diagnostic   warning   lamps   come   on   and t

he   UREA   warning   lamp   flashes,   accompanied   by
 a

n   audible   signal   and   the   display   of   the   message
 "

Emissions   fault:   Starting   prevented".
Starting prevented
To
  be   able   to   start   the   engine,   you   must   call   on  
a

  CITROËN   dealer   or   a   qualified   workshop.

01
DS3_en_Chap13b_RT6-2-8_ed01-2014
Select:
- 
the
  next   lower   /   higher   radio  
frequency

  automatically.
-
 
the
  previous   /   next   CD   track,   MP3  
track

  or   media.
-
 
the
  left   /   right   of   the   screen   when   a  
menu

  is   displayed.
Move
  left   /   right   in   "Move the map"   mode.a
bandon the current
operation, up one level
in
 
the
 
menu.
Long
 
press:
 
return
 
to
 
the

 
permanent
 
display.
o

pen the
"Configuration "
 
menu.
Long
 
press:
 
access
 
to

 
the
 
GPS
 
coverage
 
and

 
the
 
navigation
 
demonstration

 
mode.o
pen the "Traffic
information"
 
menu
 
and display the current
traffic

 
alerts. Select:
-
 
the
  previous/next   line   in   a   list   or   menu.
-  
the
  previous   /   next   media   folder.
-  
step
  by   step   selection   of   the   previous/
next   radio   frequency.
-  
the
  previous   /   next   MP3   folder.
Move   up/down,   in   "
Move the map"   mode.
FIRST STEPS
access to the
" Navigation - guidance "
menu
  and   display   the  
recent

  destinations.
Short press without the
engine
 
running:
 
on
 
/
 
off.
Short
 
press

 
with

 
the

 
engine

 
running:

 
audio
 
source
 
off
 
/
 
restore.
MO

d
E
 
button:
 
Selection
 of
 
the
 
type
 
of
 
permanent
 
display

.
Long
 
press:
 
black
 
screen
 
(DARK). Selection

 
and
 
confirmation
 
OK
  knob:
Selection
 
of
 
an
 
item
 
on
 
the
 
screen   or   in   a   list   or   a   menu,  
then

 
confirmation
 
with
 
a
 
short
 
press.
Other
 
than
 
for
 
menus
 
and
 
lists,   a   short   press   displays   a  
contextual

 
menu
 
depending
 
on   the   current   screen.
Rotation
 
with
 
map
 
displayed:
 
zoom   the   map   scale   in   and  
out.
V

olume
 
adjustment
 
(each
 
source is independent,
including

 
T

A
 

messages
 
and
 
navigation

 
instructions).

01
283
DS3_en_Chap13b_RT6-2-8_ed01-2014
Continuous press: reinitialisation of  the  system.
o

pen the "Telephone"   menu  
and display the list of recent
calls

 
or
 
accept   an   incoming   call.
FIRST STEPS
Short press: select pre-set radio station.
Long   press:   pre-set   the   current   station.
a
ccess to the "MUSI c "   menu,   and   display   of   the   CD/MP3/
a

pple
® tracks and folders.
Long
 
press:   display   the   audio   settings   screen   for   the  
"

ME
d
IA"   (CD/USB/iPod/Streaming/AUX)   sources.a
ccess to the "RA
d
IO"
 
menu
 
and
 display
 
the
 
list
 
of
 
stations
 
received.
Long
 
press:
 
display
 
the
 
audio
 
settings
 
screen

 
for
 
the
 
radio
 
tuner
 
source.

03
285
DS3_en_Chap13b_RT6-2-8_ed01-2014
For the details of the menus, refer to the "Screen menu map" section.
For
 
cleaning
 
the
 
screen,
 
the
 
use
 
of
 
a
 
soft,
 
non-abrasive
 
cloth
 (spectacles
 
cloth)
 
is
 
recommended,
 
with
 
no
 
additional
 
product.
"RA
d
IO"
"TELEPHONE"
(If
 
conversation
 
in
 
progress)
SETUP:
 
PARAMETERS
 
date

 
and
 
time,
 
display
 
configuration,
 
sound,
 
vehicle

 
settings.
Changing  the   audio   source:
RA d IO:   RADIO   broadcasts.
MUSI c :   playing   MUSIC.
Press the MO
d
E
 
button
 
several
 
times
 
in
 
succession
 
for
 
access
 
to
 
the   following   displays:
"FULL S c REEN MAP"
"MAP IN WIN d OW
"
(If   navigation   guidance   in  
progress)
GENERAL
OPERATION

03
DS3_en_Chap13b_RT6-2-8_ed01-2014
A press   on   the   knob   gives   access  to
  short-cut   menus   according   to   the  
display

  in   the   screen.
display according to context
RA
d
IO:
c

hange waveband MUSI
c ME d IA PLAYERS,
cd

or USB (according to
media):
Play modes:
Normal
Random
Random on all media
Repetition
TELEPHONE (call in
progress):
Private mode FULL S c REEN MAP OR IN A
NEW WIN d OW:
Stop / Restore guidance
Select destination
Enter an address
d

irectory
GPS coordinates
divert route
Move the map
Info. on location
Select as destination
Select as stage
Save this place (contacts)
Quit map mode
Guidance criteria
Put call on hold
d

TMF ring tones
Hang up
1
1
1
1
1
1
1
2
2
2
2
2
1
2
2
2
1
1
1
1
1
1FM
Traffic announcements (TA) AM
Information
Entertainment
Special or Urgent2
2
2
2
2
2
Services announcements1
GENERAL OPERATION

04
DS3_en_Chap13b_RT6-2-8_ed01-2014
Press N AV to display the
"Navigation - guidance "
  menu.
Towards a new destination
Selecting a destination
Select "Select destination" and
confirm,
  then   select   "Enter an address"
and
  confirm.
Select the "
c ountry" function then
confirm.
Select the "Town " or "Post code"
function
  then   confirm.
Select
  the   letters   in   the   name   of   the  
town or the characters in a post code
one

  at   a   time,   confirming   each   one   with  
the

  knob.
Selection the town from the list offered, then confirm
A
 
pre-set   list   (by   entering   the   first   few
 letters) of the towns in the country selected


can
  be   accessed   directly   by   selecting   and
 confirming

  "List"   in   the   screen.
If possible, enter the "Road" and "N°/X"
information  in   the   same   way.
Select "Archive"
  to   save   the   address   entered   in   a   contact   file.
After
 
about
  60   seconds   with   no   address   entered,   the   system   returns  
to

 
the
 
last
 
home   page;   to   return   to   the   current   input,   start   again   with  
steps

 
1
 
and   2   then   press   again   to   find   the   current   input.
Confirm
  "OK"   to   start   guidance.
Select
  the   guidance   criteria:   "Fastest
route", "Shortest route"
  or   optimised  
"

d istance/Time", then select the
desired
  restriction   criteria:   "With tolls ",
"With Ferry", or "Traffic info" then
confirm
  "OK".
NAVIGATION - GUIdANcE

04
289
DS3_en_Chap13b_RT6-2-8_ed01-2014
Towards a recent destinationPress N AV to display the
"Navigation - guidance "
  menu.
Select the desired destination and
confirm
  to   start   guidance. Towards a contact in the contacts directory
Select "Select destination" and
confirm,
  then   select   " d irectory" and
confirm.
Selection
  the   desired   destination   from  
your

  contacts   and   confirm   "OK" to start
the
  guidance.Press N AV
to display the
"Navigation - guidance "
  menu.
Navigation
  towards   a   contact   is   only   possible   if   it   has   an   address  
entered

  in   the   audio   navigation   system.
d

elete recent destinations Press N AV to display the
"Navigation - guidance "
  menu.
Select "Options "
  and   confirm   and   then  
"

d elete recent destinations" and
confirm.
NAVIGATION - GUIdANcE

04
DS3_en_Chap13b_RT6-2-8_ed01-2014
Select "Select destination" and
confirm,  then   select   "GPS coordinates"
and
  confirm.
Enter
  the   GPS   coordinates   and   confirm  
"

OK"   to   start   the   guidance.
Press N AV
to display the
"Navigation - guidance "   menu.
Towards GPS coordinates
Towards a point on the map
With   the   map   displayed,   press  
OK
to
display   the   contextual   menu.   Select  
"

Move the map"   and   confirm.
Press OK   to   display   the   contextual  
menu

  for   "Move the map"   mode.
Select "Select as destination" or
"Select as stage"
  and   confirm.
Move
  the   cursor   using   the   control   to  
identify

  the   desired   destination.
NAVIGATION - GUIdANcE

04
291
DS3_en_Chap13b_RT6-2-8_ed01-2014
Towards points of interest (POI)The points of interest (P o I) indicate all of the service locations in the vicinity
(hotels,   various   businesses,   airports...).
Select the "Enter an address" function
and
  confirm,   then   select   Select
destination
 

and   confirm.
To select a P
o I close to your current
location, select " POI"
  and   confirm,   then  
select "

Around the current place" and
confirm.
To
  select   a   POI   as   a   stage   on   the   route,  
select "

POI"   and   confirm,   then   select   "On
the route"
  and   confirm.
To
  select   a   POI   as   a   destination,   first  
enter the country and town (see "T

owards
a new destination"), select " POI" and
confirm,
  finally   select   "Near "
  and   confirm. Search
  for   POIs   in   the   categories  
suggested

  in   the   following   pages.
Select "Search by Name
"
  to   search   for   POIs   by   name   and   not   by  
proximity

.
Select
  the   POI   and   confirm   "OK" to start
the
  guidance.
Press N AV
to display the
"Navigation - guidance "
  menu.
NAVIGATION - GUIdANcE