CITROEN DS3 CABRIO 2014 Handbook (in English)

Page 331 of 384

329
06
Initiate the pairing between the telephone and
the vehicle. This pairing can be initiated from
the vehicle's telephone function menu or via the
telephone's keypad. Refer to the steps in "Pairinga telephone" on the previous pages. During the
pairing phase, the vehicle must be stationary with
the key in the ignition.
Select the telephone to be connected from the telephone function menu.
The audio system connects to a newly paired telephone
automatically.






Bluetooth audio streaming *
Wireless transmission of music fi les on the telephone, played via
the audio equipment. The telephone must be able to manage theappropriate Bluetooth profi les (Profi les A2DP / AVRCP).
*
Depending on the compatibility of the telephone.
**

In certain cases, playing of the Audio fi les must be initiated from the
keypad.
*** If the tele
phone supports the function.
Activate the streaming source by
pressing the SOURCE button ** .
The tracks to be played can becontrolled as usual via the buttons on
the audio system control panel and
the steering mounted controls *** .
The contextual information can bedisplayed on the screen.
Durin
g a call, press this button for more than
2 seconds.

Confi rm with OK to end the call. Endin
g a call

BLUETOOTH FUNCTIONS

Page 332 of 384

07 SCREEN MENU MAP(S)


Radio-CD


* The settings vary according to vehicle. REG mod
e
CD repeat
Shuffl e play


Vehicle config *
R wiper in rev


Options
Guide lighting
Diagnostic RDS options
Vi
ew

Abandon
1
2
3
3
1
2
2
2
2
1
2
2
Screen A







MAIN FUNCTION
Option A1
Option A11


Option A

Option B... 1
2
3
1

Page 333 of 384

331
07

Units
Temperature: °Celsius / °Fahrenheit
Fuel consumption: KM/L -L/100 - MPG
1
2
2

SCREEN MENU MAP(S)


Display adjust
Month
Day
Hour
Minutes Ye a
r
12 H/24 H mode

Language
Italiano
Nederlands
Portuguès
Portuguès-Brazil
Français
Deutsch
English
Español
1
2
2
2
2
2
2
1
2
2
2
2
2
2
2
2

Page 334 of 384

07SCREEN MENU MAP(S)
activate / deactivate RDS
activate / deactivate REG mode
activate / deactivate radiotext

RADIO
activate / deactivate Intro


CD / MP3 CD
activate / deactivate track repeat (the
entire current CD for CD, the entirecurrent folder for MP3 CD)
activate / deactivate random play (the
entire current CD for CD, the entire
current folder for MP3 CD)
activate / deactivate track repeat (of the current folder / artist / genre / playlist)

USB
activate / deactivate random play(of thecurrent folder / artist / genre / playlist)
1
1
1
1
1
1
1
1
Screen C

Press the OK dial for access to short-cut menus accordingto the display on the screen:

Page 335 of 384

333
07 SCREEN MENU MAP(S)


Audio functions

Alternative frequencies (RDS)


activate / deactivate
FMpreferences

Re
gional mode (REG)

activate / deactivate

Radio-text information
(RDTXT)

activate / deactivate
1
2
3
4
3
4
3
4
Play modes

Album repeat (RPT)

activate
/ deactivate

Track random pla
y (RDM)

activate / deactivate

2
3
4
3
4


Trip computer
Distance: x miles
Enter distance to destination
Dia
gnostics
Alert log
Systems activated or deactivated State of systems
*
1
2
3
3
2
3
2

*
The settings vary according to vehicle.
ScreenC

Pressing the MENU button displays:

Page 336 of 384

07SCREEN MENU MAP(S)

Bluetooth telephone
Connect/Disconnect an equipment

Consult the paired equipment
Bluetooth confi guration

Telephone function

Audio
Streaming function
Delete a paired equipment
P
erform a Bluetooth search

Calls list Call

Directory

Terminate the current call
Manage the telephone call

Activate secret mode
1
2
3
3
3
4
4
4
2
3
4
2
3
3
Video-brightness adjustment
Display confi guration
Defi ne vehicle settings*


Personalisation-Configuration
normal video
inverse video
bri
ghtness (- +) adjustment

Setting the date and time
settin
g day/month/year
hour
/minute adjustment
choice of 12 h / 24 h mode

Choice of units
l/100 km - mp
g - km/l
°
Celsius / °Fahrenheit
Choice of lan
guage
1
2
4
3
2
4
4
3
4
4
2
3
4
4
4
*
The settings vary according to vehicle.

Page 337 of 384

335
FREQUENTLY ASKED QUESTIONS
QUESTIONANSWERSOLUTION

There is a difference in sound quality betweenthe different audiosources (radio, CD...).
For optimum sound quality, the audio settings (Volume, Bass, Treble, Ambience, Loudness) can be adapted to the different sound sources,which may result in audible differences when changing source (radio,CD...).

Check that the audio settings (Volume, Bass, Treble, Ambience, Loudness) are adapted tothe sources listened to. It is advisable to setthe AUDIO functions (Bass, Treble, Front-Rear Balance, Left-Right Balance) to the middle position, select the musical ambience "None" and set the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode.

The CD is ejected automatically or is not played by the player.
The CD is inserted upside down, is unplayable, does not contain any audio data or contains an audio format which the player cannot play.
The CD is protected by an anti-pirating protection system which is not recognised by the audio equipment.


- Check that the CD is inserted in the player the right way up.


- Check the condition of the CD: the CD cannot be played if it is too damaged.


- Check the content in the case of a recordedCD: consult the advice in the "Audio" section.


- The audio equipment's CD player does notplay DVDs.


- Due to their quality level, certain writeableCDs will not be played by the audio system.

The message "USB peripheral error" isdisplayed on the screen.
The Bluetooth connectionis cut.
The battery of the peripheral may not be suffi ciently charged.
Recharge the battery of the peripheral device.
The USB memory stick is not recognised.
The memory stick may be corrupt.

Reformat the memory stick.

Page 338 of 384

FREQUENTLY ASKED QUESTIONS
QUESTIONANSWERSOLUTION
I am unable to access my voicemail.
Few telephones or service providers allow the use of this function.

The CD player sound is poor.
The CD used is scratched or of poor quality.
Insert good quality CDs and store them in suitableconditions.

The audio equipment settings (bass, treble, ambiences) are unsuitable. Set the treble or bass level to 0, without selecting an ambience.

The stored stations do not function (no sound, 87.5 Mhz is displayed...).
An incorrect waveband is selected.
Press the BAND AST button to return to the waveband (AM, FM1, FM2, FMAST) on which thestations are stored.

The traffi c announcement(TA) is displayed. I donot receive any traffi c information.

The radio station is not part of the regional traffi c information network.
Tune to a radio station which broadcasts traffi cinformation.

The quality of receptionof the radio station listened to gradually deteriorates or the stored stations do not function(no sound, 87.5 Mhz isdisplayed...).

The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which thevehicle is travelling.

Activate the RDS function to enable the systemto check whether there is a more powerfultransmitter in the geographical area.

The environment (hills, buildings, tunnels, basement car parks...) blockreception, including in RDS mode.
This phenomenon is normal and does not indicatea failure of the audio equipment.

The aerial is absent or has been damaged (for example when going through a car wash or into an underground car park).
Have the aerial checked by a CITROÀN dealer.

Page 339 of 384

337
FREQUENTLY ASKED QUESTIONS
QUESTIONANSWERSOLUTION
Sound cut-outs of 1 to2 seconds in radio mode.During this brief sound cut-out, the RDS searches for any frequency permitting better reception of the station.
Deactivate the RDS function if the phenomenon is too frequent and always on the same route.

With the engine off, the audio equipment switches off after a few minutes of use.
When the engine is switched off, the audio equipment operating timedepends on the battery charge.
The switch-off is normal: the audio equipment switches to economy mode and switches off to prevent discharging of the vehicle's battery.
Start the vehicle's engine to increase the batterycharge.
The message "the audio system is overheated" appears on the display.
In order to protect the installation if the surrounding temperature is toohigh, the audio equipment switches to an automatic thermal protectionmode leading to a reduction of the volume or stopping of the playing of the CD.

Switch the audio system off for a few minutes toallow the system to cool.

Page 340 of 384


Index


Visual search - Alphabetical index

Page:   < prev 1-10 ... 291-300 301-310 311-320 321-330 331-340 341-350 351-360 361-370 371-380 ... 390 next >