display CITROEN DS3 CABRIO 2015 Handbook (in English)

129
Programming
F Turn  thumb   wheel   1 to the "CRUISE"
position:   the   cruise   control   mode   is  
s

elected   but   is   not   switched   on   (PAUSE).
F
 
S
et   the   programmed   speed   by  
a

ccelerating   to   the   required   speed,   then  
p

ress button 2 or 3   (e.g.:   70   mph  
(110
  km/h)).
You
 
can
 
then
 
change
 
the
 
programmed   speed   using   buttons   2   and   3:
-
 
b

y
 
+
 
or
 
-
 
1
 
mph
 
(km/h)
  =   short   press,
-
 
b

y
 
+
 
or
 
-
 
5
 
mph
 
(km/h)
  =   long   press,
-
 
i

n
 
steps
 
of
 
+
 
or
 
-
 
5
 
mph   (km/h)   =   maintained   press.
F
 
S

witch
 
off
 
the
 
cruise
 
control   by   pressing   button   4:
  the   screen  
c

onfirms
 
that
 
it
 
has
 
been   switched   off   (PAUSE).
F
 
S

witch
 
the
 
cruise
 
control   back   on   by   pressing   button   4  
ag
ain.
Exceeding the programmed speed
Intentional or unintentional exceeding of the programmed speed results in flashing   of   this   speed   in   the   screen.
Return
  to   the   programmed   speed,   by   means   of   intentional   or   unintentional
 d

eceleration   of   the   vehicle,   automatically   cancels   the   flashing   of   the   speed.
Leaving cruise control mode
F Turn  thumb   wheel   1 to the "0"  position:   the   cruise   control   mode   is  d
eselected.   The   display   returns   to   the   distance   recorder.
Operating fault
In the event of a cruise control malfunction, the   speed   is   cleared   resulting   in   flashing   of   the  
d

ashes.   Have   it   checked   by   a   CITROËN   dealer  
o

r   a   qualified   workshop.
When
  the   cruise   control   is   switched   on,  
b

e   careful   if   you   maintain   the   pressure  
o

n   one   of   the   programmed   speed  
c

hanging   buttons:   this   may   result   in  
a

  very   rapid   change   in   the   speed   of  
y

our vehicle.
do n

ot use the cruise control on
slippery
  roads   or   in   heavy   traffic.
On
  a   steep   descent,   the   cruise   control  
w

ill not be able to prevent the vehicle
from
  exceeding   the   programmed  
s

peed.
To
  avoid   any   risk   of   jamming   of   the  
ped

als:
-
 
e
nsure   that   the   mat   is   secured  
c

o r r e c t l y,
-
 
n
ever   fit   one   mat   on   top   of   another.
driving

137
Model without AUTO lighting
Model with AUTO lighting
Manual controls
The lighting is controlled directly by the driver by   means   of   the   ring   A   and   the   stalk   B.
Automatic
  illumination   of   headlamps.
B.
 S

talk   for   switching   the   headlamp   beam:  
p

ull   the   stalk   to   switch   between   dipped   and  
m

ain   beam   headlamps.
In
  the   lamps   off   and   sidelamps   modes,  
t

he   driver   can   switch   on   the   main   beam  
h

eadlamps   temporarily   ("headlamp   flash")   by  
m

aintaining   a   pull   on   the   stalk.
A.
 M

ain   lighting   mode   selection   ring:   turn   it  
t

o   position   the   symbol   required   facing   the  
ma

rk.Lighting
  off   /   daytime   running   lamps.
Sidelamps
 o

nly.
Dipped headlamps or main beam headlamps.
displays
Lighting of the corresponding indicator lamp on the   instrument   panel   confirms   the   switching   on  
o

f   the   lighting   selected.
The
  instrument   panel   has   permanent   back-
lighting.
  Illumination   of   the   instrument   panel   is  
t

herefore   not   linked   to   the   exterior   lighting.
Visibility

The sidelamps and dipped beam headlamps are switched   on   automatically,   without   any   action   on t

he   part   of   the   driver,   when   a   low   level   of   external
 l

ight   is   detected   or   in   certain   cases   of   activation   of
 t

he   windscreen   wipers.
As
  soon   as   the   brightness   returns   to   a   sufficient
 l

evel   or   after   the   windscreen   wipers   are   switched
 o

ff,   the   lamps   are   switched   off   automatically.
Automatic illumination of headlamps
Activation
F Turn  ring   to   the   "AUTO"  position.   The  a
utomatic   illumination   of   headlamps   is  
a

ccompanied   by   a   message   in   the   screen.
deactivation
F Turn  ring   to   a   position   other   than   "AUTO".  D
eactivation   is   accompanied   by   a   message  
i

n   the   screen.
Association with the automatic
"Guide-me-home" lighting
Association with the automatic illumination of headlamps   provides   "guide-me-home"   lighting  
w

ith   the   following   additional   options:
-
 
s
election   of   the   lighting   duration   to   15,  
30
  or   60   seconds   in   the   functions   that   can  
b

e   set   in   the   vehicle   configuration   menu  
(

except   in   the   case   of   the   monochrome  
s

creen   A,   for   which   the   duration   is   set:  
60
  seconds),
-
 
a
utomatic   activation   of   "guide-me-home"  
l

ighting   when   automatic   illumination   of  
h

eadlamps   is   in   operation.
Operating fault
In the event of a fault with the
sunshine  sensor,   the   lighting  
c

ome
 
on,
 
this   warning   lamp   is   displayed   in   the  
i

nstrument
 
panel   and/or   a   message   appears   in  
t

he
 
screen,
  accompanied   by   an   audible   signal.
Contact
 
a
 
CITROËN   dealer   or   a   qualified  
w

orkshop. In
 
fog   or   snow,   the   sunshine   sensor  
m

ay
 
detect   sufficient   light.   Therefore,  
t

he
 
lighting   will   not   come   on  
au

tomatically.
do n

ot cover the sunshine sensor,
coupled
  with   the   rain   sensor   and  
l

ocated   in   the   centre   of   the   windscreen  
b

ehind   the   rear   view   mirror;   the  
a

ssociated   functions   would   no   longer  
be c

ontrolled.

155
The alert is maintained until the system is r einitialised.
The
 
loss
 
of
 
pressure
 
detected
 
does
 
not
 a
lways
 
cause
 
visible
 
bulging
 
of
 
the
 
tyre.
 
D

o
 
not
 
satisfy
 
yourself
 
with
 
just
 
a
 
visual
 
c

heck. Before
  reinitialising   the   system,   ensure  
t

hat the pressures of the four tyres are
correct
  for   the   use   of   the   vehicle   and   in  
l

ine   with   the   recommendations   on   the  
t

yre   pressure   label.
The
  under-inflation   detection   system  
d

oes   not   give   a   warning   if   a   pressure   is  
i

ncorrect   at   the   time   of   reinitialisation.
Under-inflation alert
This is given by fixed illumination of this   warning   lamp,   accompanied   by  
a

n   audible   signal   and   the   display   of   a  
m

essage.
F
 
R

educe   speed   immediately,   avoid  
e

xcessive   steering   movements   and   sudden  
b

raking
F
 
S

top
 
the   vehicle   as   soon   as   it   is   safe   to   do   so.F
 I f   you   have   a   compressor   (such   as   the   one  
i

n   the   temporary   puncture   repair   kit)   check  
t

he   pressures   of   the   four   tyres   when   cold.  
I

f   it   is   not   possible   to   carry   out   this   check  
s

traight   away,   drive   carefully   at   reduced  
s

peed.
or
F

I
n the event of a puncture, use the
temporary
  puncture   repair   kit   or   the   spare  
w

heel   (depending   on   equipment),
Reinitialisation
It is necessary to reinitialise the system every time   one   or   more   tyre   pressure   is   adjusted,   and  
a

fter   changing   one   or   more   wheels.
A
  label   attached   to   the   middle   pillar,   left   hand  
s

ide,   gives   a   reminder   of   this.
Safety

Reinitialisation of the system must be done with the ignition on and   the   vehicle   stationary,  i
n the vehicle   configuration   menu.
Monochrome screen A
F Press the MENU button for access to the
main   menu.
F

P
ress the " 5" or " 6" button to select
the
  menu   Veh conf ig,
  then   confirm   by  
p

ressing   the   OK
 
button.
F

P
ress the " 5" or " 6" button to select the
" Reinit inflat ",
  menu,   then   confirm   by  
p

ressing   the   OK
 
button.
 A

  message   is   displayed   to   confirm   the  
in

struction.
F
 
C
onfirm   by   pressing   the   OK
 
button.
Monochrome screen C
F Press the MENU button for access to the
main   menu.
F

P
ress the " 5" or " 6" button to
select
  the   menu,   "Personalisation-
configuration "then
  confirm   by   pressing  
t

he OK
 
button.
F

P
ress the " 5" or " 6" button to select the
"
def

ine vehicle parameters "
  menu,   then  
c

onfirm   by   pressing   the   OK
 
button.F
P ress the "
5" or " 6" button to select
the " Tyre pressures "
  menu,   then   the  
"R

einitialisation"
  menu,   then   confirming  
b

y   pressing   the   OK
 
button.
 A

  message   confirms   the   reinitialisation.

157
Colour screen
F Press the "SETUP" button for access to
the   configuration   menu.
F

Sel
ect the " Vehicle parameters "
  menu,  
t

hen   confirm.
F

Sel
ect "
dr
iving assistance ",
  then   confirm.
F

Sel
ect "Initialisation of under-inflation ",
then
  confirm.
A
  message   is   displayed   to   confirm   the  
r

einitialisation
 i
nstruction.
F

Sel
ect "Ye s" or " No",
  then   confirm.
 A

  message   confirms   the   reinitialisation.The
  new   pressure   settings   registered   are  
c

onsidered   to   be   reference   values   by   the  
s

ystem.
Snow chains
The system does not have to be r
einitialised   after   fitting   or   removing  
sn

ow
 c
hains. Before
  doing   anything   to   the   system,  
t

he   pressures   of   the   four   tyres   must   be  
c

hecked   and   the   system   reinitialised.
The   under-inflation   alert   is   only  
d

ependable   if   the   system   has   been  
r

einitialised   with   all   four   tyres   inflated   to  
t

he   correct   pressures.
Operating fault
The flashing and then fixed illumination of the u
nder-inflation w arning lam p a ccompanied b

y   illumination   of   the   Service   warning   lamp  
i

ndicates   a   fault   with   the   system.
In
  this   case,   under-inflation   monitoring   of   the  
t

yres   is   no   longer   assured.
Have
  the   system   checked   by   a   CITROËN  
d

ealer   or   a   qualified   workshop.
Safety

Operation
When your vehicle is too close to or
approaches  the   vehicle   ahead   too   quickly   the  
s

ystem   automatically   applies   the   brakes   to  
a

void   a   collision. The
  collision   can   be   avoided   automatically   if   the d
ifference   in   speed   between   your   vehicle   and   the v

ehicle   ahead   does   not   exceed   9   mph   (15   km/h).
Above
  this   threshold,   the   system   will   do   what
 i

s   possible   to   avoid   or   reduce   the   accident   by
 l

owering   the   speed   of   impact.
The
  automatic   braking   may   bring   the   vehicle   to  
a

  complete   stop   if   the   situation   requires   it.
In
  this   case,   the   vehicle   is   held   stationary  
t

emporarily   (for   about   1.5   seconds)   to   allow  
t

he   driver   to   take   back   control   by   pressing   the  
b

rake
 ped
al.
You
  are   then   alerted   by   the   display   of   a  
m

essage.
The
  brake   lamps   on   your   vehicle   come   on   to  
w

arn   other   road   users.
After
  an   impact,   the   system   is  
a

utomatically   put   out   of   service:   it   no  
lon

ger
 ope
rates.
You
  must   go   to   a   CITROËN   dealer   or   a  
q

ualified   workshop   to   have   the   system  
m

ade   operational   again.
During
  automatic   braking,   the   driver  
c

an   always   obtain   a   higher   rate   of  
d

eceleration   than   that   controlled   by   the  
s

ystem,   by   pressing   firmly   on   the   brake  
ped

al.
The
  triggering   of   the   system   may   cause  
t

he   engine   to   stall,   unless   the   driver  
d

epresses   the   clutch   pedal   quickly  
e

nough   during   automatic   braking.

deactivation
The system is deactivated in the vehicle configuration   menu,   accessible   with   the   ignition   on.
Its state is memorised when the ignition is switched   off.
When
  the   system   is   deactivated,   a  
m

essage   is   displayed   every   time   the  
i

gnition   is   switched   on,   to   warn   you.
With the monochrome screen C
F Press the MENU button for access to the
main   menu.
F

Sel
ect "Personalisation-Configuration ".
F

Sel
ect "
def
ine vehicle parameters ".
F

Sel
ect "
dr
iving assistance ".
F

Select " Automatic emergency braking: OFF "
or " Automatic emergency braking : ON".
F Press the " 7" or " 8"   button   to   check   or  u
ncheck   the   box   and   respectively   activate  
o

r   deactivate   the   system.
F

P
ress the " 5" or " 6" button, then the OK
button to select the "OK"
 

box   and   confirm  
o

r the Back
 
button   to   cancel.
With the colour screen
F Press the SETUP button .
F Sel ect "Vehicle parameters "
  and   press  
t

he   knob   to   confirm.
F

Sel
ect "
dr
iving assistance "
  and   press   the  
k

nob   to   confirm.
F

Select " Automatic emergency braking: OFF "
or " Automatic emergency braking: ON ".
F Check  or   uncheck   the   box   to   activate   or  d
eactivate   the   system.
F
 
P
ress   the   knob   to   confirm.

165
Operating faults
In the event of an impact to the windscreen   at   the   sensor,   deactivate  
t

he   system   and   contact   a   CITROËN  
d

ealer   or   a   qualified   workshop to   have  
y

our   windscreen   replaced.
Never
  try   to   remove,   adjust   or   test  
t

he sensor.
Only
  a   CITROËN   dealer   or   a   qualified
 w

orkshop   is   able   to   work   on   the   system.
When
  towing   a   trailer   or   when   the  
v

ehicle   is   being   towed,   the   system   must  
b

e   deactivated.
Do not stick or other wise fix any object on the   windscreen   in   front   of   the   sensor.
Sensor fault
The operation of the laser sensor may suffer inter ference   from   accumulations   of   dirt   or  
m

isting   of   the   windscreen.   In   this   case   you   are  
w

arned   by   the   display   of   a   message.
Use
  the   windscreen   demisting   and   regularly  
c

lean   the   area   of   the   windscreen   in   front   of   the  
sen

sor.
System fault
In the event of a malfunction of the system, you are   warned   by   an   audible   signal   and   the   display  
o

f   the   message   "Automatic braking system
fault" .
Have
  the   system   checked   by   a   CITROËN  
d

ealer   or   a   qualified   workshop.
Safety

199
Range indicators
When switching on the ignition, an indicator gives   an   estimate   of   the   distance   that   can  
b

e   travelled   with   your   vehicle   before   engine  
s

tarting   is   automatically   prevented,   once   the  
v

ehicle   starts   using   the   reserve   of   AdBlue
® or
after
 
a
 
fault
 
is
 
detected
 
with
 
the
 
SCR
 
system.
In
 
the
 
event
 
of
 
simultaneous
 
system
 
fault
 
and  
l

ow
 
AdBlue
® level, the shortest range is the one d
isplayed. The
  engine   start   prevention   system  
r

equired   by   regulations   is   activated  
a

utomatically   once   the   AdBlue
® tank i
s
 
empty.
In the event of the risk of non-starting related to a lack of AdBlue®
Range greater than 1 500 miles (2 400 km)
When   the   ignition   is   switched   on,   no  
i

nformation   on   range   is   displayed   automatically  
i

n   the   instrument   panel.
Practical information