CITROEN DS3 CABRIO 2015 Handbook (in English)

49
Radio- Cd
With the Audio system switched on, once the "Radio- CD"   menu   has   been   selected   you   can  
a

ctivate   or   deactivate   the   functions   linked  
w

ith   use   of   the   radio   (RDS,   REG),   or   the   CD  
(

introscan,   shuffle,   CD   repeat).
For
  more   information   on   the   "Radio- CD"  
a

pplication,   refer   to   the   "Audio   system"   section.
Vehicle configuration
Once the " Vehicle Configuration" menu has been   selected,   you   can   activate   or   deactivate  
t

he   following   equipment:
-
 
w
iper   linked   with   reverse   gear   (refer   to   the  
"

Visibility"),
-
 
g
uide-me-home   lighting   (refer   to   the  
"

Visibility"),
-
 
p
arking   sensors   (refer   to   the   "Driving"  
s

ection),
Options
Once the "Options" menu has been selected, you   can   start   diagnostics   of   the   status   of   the  
e

quipment   (active,   not   active,   faulty).
This menu is also used to reinitialise the tyre under-inflation   detection   system   (refer   to   the  
"

Safety"
 s
ection).
Multifunction screens

Languages
Once the "Languages" menu has been selected, you   can   change   the   language   used   by   the s

creen   by   choosing   one   from   a   defined   list.
Units
Once the "Units" menu has been selected, you   can   change   the   units   of   the   following  
par

ameters:
-
 
t
emperature   (°C   or   °F),
-
 
f
uel   consumption   (l/100   km,   mpg   or   km/l).
Once
  the   fuel   consumption   units   have  
b

een   set   to   mpg,   the   information   in   the  
i

nstrument   panel   screen   on   speed   and  
d

istance   will   also   be   in   mph   and   miles.
For
 

safety
 
reasons,
 
configuration
 
by
 
the
 d

river   of   the   multifunction   screen   must  
o

nly   be   done   when   stationary.
display settings
Once the "Display settings" menu has been selected,   you   can   gain   access   to   the   following  
se

ttings:
-
 
ye
ar,
-
 
m
onth,
-
 d

ay,
-
 h

o u r,
-
 m

inutes,
-
 
1
2   or   24   hour   mode.
F
 
O
nce   you   have   selected   a   setting,   press  
t

he "7" or " 8"
  buttons   to   change   its   value.
F

P
ress the " 5" or " 6" buttons to switch
respectively
  to   the   previous   or   next   setting.
F

P
ress the "OK"
 
button   to   save   the   change  
a

nd   return   to   the   normal   display   or   press  
t

he "Back"
 
button   to   cancel. Setting the date and time
F

P
ress the MENU
 
button.
F
 
S
elect   "Display   settings"   using   the   "5 "
or " 6"
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
S
elect   the   "Year"   function   using   the   "5 "
or " 6"
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
C
hoose   the   desired   value,   using   the   "7 "
or " 8"
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
R
epeat   the   procedure   to   set   the   "Month",  
"

Day",   "Hours",   and   "Minutes".

51
Monochrome screen C
This displays the following information:
-  t ime,
-
 d

ate,
-
 
a
mbient   temperature   (this   flashes   if   there   is  
a

  risk   of   ice),
-
 
s
tatus   of   doors   and   boot,
-
 
a
udio   sources   (radio,   CD,   USB   port   /  
a

uxiliary   socket   etc.),
-
 
t
rip   computer   (refer   to   the   "Instruments   and  
c

ontrols"
 s
ection).
-
 
i
nformation   or   alert   messages,
-
 
s
ettings   menus   for   the   screen   and   vehicle  
s

ystems.
displays in the screen
From your Audio system control panel, you can:
F p ress the "MENU"  button   to   gain   access   to  
t

he main menu ,
F

p
ress the " 5" or " 6" buttons to scroll
through
  the   items   in   the   screen,
F

p
ress the "MO
dE" 
button   to   change   the  
p

ermanent   application   (trip   computer,  
a

udio
 s
ource...),
F

p
ress the " 7" or " 8"
  buttons   to   change   a  
s

etting   value,
F

p
ress the "OK"
 
button   to   confirm,
or
F

p
ress the "Back"
 
button   to   abandon   the  
o

peration   in   progress.
Controls
F Press the "MENU"  button   to   gain   access  t
o the main menu :
-
 
a
udio   functions,
-
 
t
he   trip   computer,
-
 pe

rsonalisation-configuration,
-
 
t
elephone   (hands-free   kit).
F

P
ress the " 5" or " 6" buttons to select the
menu
  required,   then   confirm   by   pressing  
t

he "OK"
 
button.
Main menu
Multifunction screens

With the Audio system switched on, once this menu   has   been   selected   you   can   activate  
o

r   deactivate   the   functions   linked   with   use  
o

f   the   radio   (RDS,   REG,   RadioText),   the   CD  
(

introscan,   shuffle,   CD   repeat)   or   the   MP3  
p

layer   (USB   port   /   auxiliary   socket).
For
  more   information   on   the   "Audio   functions"  
a

pplication,   refer   to   the   "Audio   system"   section.
"Audio functions"
menu"Trip computer"
menu
Once this menu has been selected, you can c
onsult   information   concerning   the   status   of   the  
v

ehicle   (warnings   log,   status   of   functions,   etc.)
Alert log
This summarises the active warning messages, displaying   them   in   succession   in   the  
m

ultifunction
 s
creen.
Status of functions
This summarises the status (active or inactive) of   the   vehicle's   functions.
Enter distance to destination
This allows you to enter an approximate distance   until   your   final   destination. F

P
ress the "MENU"
 
button   to   gain   access  
t

o the general menu
.
F
P
ress the arrows, then the "OK"
button to
select the " Trip computer "   menu.
F
I
n the "
Trip computer "   menu,   select   one  
o

f   the   following   applications:

53
"Personalisation-
Configuration"
menu
Once this menu has been selected, you can g
ain   access   to   the   following   functions:
-
 
d
efine   the   vehicle   parameters,
-
 
d
isplay   configuration,
-
 
c
hoice   of   language.
Define the vehicle parameters
Once this menu has been selected, you can activate   or   deactivate   the   following   equipment:
-
 
w
iper   linked   to   reverse   gear   (refer   to   the  
"

Visibility"
 s
ection),
-
 
g
uide-me-home   lighting   and   duration   (refer  
t

o   the   " Visibility"   section), Example:
  setting   of   the   duration   of   the  
guide-me-home l ighting
F P ress the "5" or " 6" buttons, then the
"OK"
 

button   to   select   the   menu   required.F

P
ress the "
5" or " 6" buttons, then the
"OK"
 
button   to   select   the   "Guide-me-home  
h

eadlamps"
 l
ine.
F
P
ress the "
7" or " 8" buttons to set the
value   required   (15,   30   or   60   seconds),   then  
p

ress the "OK"
 
button   to   confirm.
F
P
ress the "5" or " 6" buttons, then the
"OK" button to select the "OK"
 

box   and  
c

onfirm   or   press   the   "Back" button to
cancel.
This menu is also used to reinitialise the tyre u nder-inflation   detection   system   (refer   to   the  
"

Safety"
 s
ection).
-
 
p
arking   sensors   (refer   to   the   "Driving"  
s

ection).
-  
a
utomatic   emergency   braking   (refer   to  
t

he   "Safety"   section,   under   "Active   City  
B

rake").
Multifunction screens

Display configuration
Once this menu has been selected, you can gain   access   to   the   following   settings:
-
 b

rightness-video
 s
etting,
-
 
d
ate   and   time   setting,
-
 
s
election   of   units.
Once
  the   fuel   consumption   units   have  
b

een   changed   to   mpg,   the   information  
i

n   the   screen   relating   to   speed   and  
d

istance   also   changes   to   mph   and  
mil

es
 re
spectively. For
 

safety
 
reasons,
 
configuration
 
by
 
the
 d

river   of   the   multifunction   screen   must  
o

nly   be   done   when   stationary.
Choice of language
Once this menu has been selected, you can change   the   language   used   by   the   screen   by  
c

hoosing   one   from   a   defined   list.With
  Audio   system   on,   once   this   menu   is  s
elected   you   can   configure   your   Bluetooth  h
ands-free   system   (pairing),   view   the   various  
t

elephone   directories   (list   of   calls,   services...)  
a

nd   manage   your   calls   (call,   hang   up,   second  
c

all,   secret   mode...).
For
  more   information   on   the   "Telephone"  
f

unction,   refer   to   the   "Audio   system"   section.
"Telephone" Menu
Setting the date and time
F Sel ect the " Set date and time" function
using
  the   "5 " or " 6"
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
A
djust   the   settings   one   by   one   using  
the " 7" or " 8"
  button   then   confirm  
with "OK" .
F

T
hen select the "OK"
 
box   in   the   screen  
a

nd   confirm.

55
16/9 colour screen (eMyWay)
It displays the following information automatically   and   directly:
-
 
t
ime,
-
 d

ate,
-
 al

titude,
-
 
a
mbient   temperature   (the   value   displayed  
f

lashes   if   there   is   a   risk   of   ice),
-
 
c
heck   of   the   doors,
-
 
p
arking   sensors,
-
 
w
arning   and   vehicle   function   status  
m

essages,   displayed   temporarily,
-
 
a
udio   functions,
displays in the screen
To select one of the applications, from the eMyWay   control   panel:
F
 
p
ress   the   dedicated   "RA
dI
O", "MUSIC" ,
" N AV " , "TR AFFIC" , "SETUP" or
"PHONE" button for access to the
corresponding
 m

enu,
F
 
t
urn   the   knob   to   change   the   selection,
F
 
p
ress   the   knob   to   confirm   the   selection,


or
F

p
ress the "Back"
 
button   to   abandon   the  
c

urrent  
o
peration  
a
nd  
r
eturn  
t
o  
t
he  
p
revious  
d

isplay.
Controls
For more information on these applications, refer to the "eMyWay" section or to the specific
user
  guide   given   to   you   with   the   other   owner's  
d

ocuments.
-
 
t

rip
 
computer
 
information
 
(see
 
the
 
"

Instrument
 
s
 
and
 
controls"
 
section),
-
 
s

atellite
 
navigation
 
system
 
information,
-
 
t

he
 
settings
 
menus
 
for
 
the
 
display
 
screen,
 
t

he
 
navigation
 
system
 
and
 
vehicle
 
systems.
Multifunction screens

Display configuration
This menu allows you to choose a colour scheme   for   the   screen,   adjust   the   brightness,  
t

he   date   and   time   and   to   choose   the   units  
of
  distance   (km   or   miles),   fuel   consumption  
(

l/100   km,   mpg   or   km/l)   and   temperature  
(

°Celsius
 o
r
 °
Fahrenheit).
Voice synthesis setting
This menu allows you to adjust the volume for navigation   instructions   and   to   choose   the   type  
o

f   voice   (male   or   female).
Choice of language
This menu allows you to select the language used   by   the   display   from   a   defined   list.
"SETUP" menu
F Press the "SETUP" button   to   gain   access  t
o   the   configuration   menu.   This   allows   you  
t

o   select   from   the   following   functions:
-
 
"di
splay configuration ",
-
 
"V

oice synthesis settings",
-
 
"C

hoice of language ",
-
 
"V

ehicle parameters ",
-
 
"T

rip computer ".date and time
F
P ress the "SETUP"  button.
F

Sel
ect "
di
splay configuration "
  and   press  
t

he   knob   to   confirm.
F

Sel
ect the " Adjust date and time " function
and
  press   the   knob   to   confirm.
F
 
A
djust   the   settings   one   by   one   using   the  
d

irectional   arrows   then   confirm   by   pressing  
t

he   knob.
Select " Synchronisation of minutes with
GPS "
  so   that   adjustment   of   the   minutes   is   done  
a

utomatically   by   satellite   reception.

57
Vehicle parameters
This menu allows you to activate or deactivate certain   driving   and   comfort   systems,   arranged  
b

y
 c
ategory:
-
 
" P

arking sensors "
 R

efer   to   the   "Driving"   section.
-
 
" O

peration of rear wiper "
●
 
"R

ear wiper in reverse: O "
  (Rear   wiper  
c

oupled   to   reverse   gear)
 R

efer   to   the   " Visibility"   section.
-
 
" L

ighting configuration "
●
 
"duration of guide-me-home lighting: O "
(Automatic   guide-me-home   lighting)
 Refer  to   the   " Visibility"   section.
-
 "dr iving assistance "
●
 
"A

utomatic emergency braking: OFF "
(Active
  City   Brake)
 R

efer   to   the   "Safety"   section.
●
 
"I

nitialisation of under-inflation "
(Reinitialisation
  of   the   tyre   under-
inflation
  detection   system)
 R

efer   to   the   "Safety"   section.
Trip computer
This menu allows you to view information on   the   state   of   the   vehicle.   You   can   choose  
b

etween   the   following   functions:
-
 
"A

ler t log ".
 L

ist   of   active   alerts.
-
 
" S

tate of functions "
 L

ist   of   the   state   of   functions   (activated,  
d

eactivated   or   faulty)
For
  safety   reasons,   configuration   of   the  
s

creen   by   the   driver   must   only   be   done  
w

hen   stationary.
Multifunction screens

access
This section describes the functions of the remote control key, electric windows,   central   locking   of   doors   and   boot   and   access   to   the   fuel   filler.