CITROEN DS3 CABRIO 2016 Handbook (in English)

Page 341 of 450

339
RdS
The external environment (hills, b
uildings,   tunnels,   basement   car  
p

arks, ...)   may   block   reception,  
i

ncluding   in   RDS   mode.   This   is   a  
n

ormal   effect   of   the   way   in   which   radio  
w

aves   are   transmitted   and   does   not  
i

ndicate   any   failure   of   the   audio   system.
Press the ME
n

U
 
button.
Select " Audio functions ".
Press OK.
Select the " FM waveband
preferences "
  function.
Press OK. Select "
Activate RdS".
P ress OK,
  RDS   is   displayed   in   the  
sc

reen.
In " Radio "
  mode,   press   OK
 
directly   to   activate   /  
d

eactivate   RDS   mode.
RDS,
  if   displayed,   enables   you   to   continue
 l

istening   to   the   same   station   by   automatic
 r

etuning   to   alternative   frequencies.
 H

owever,   in   certain   conditions,   coverage
 o

f   an   RDS   station   may   not   be   assured
 t

hroughout   the   country   as   radio   stations
 d

o   not   cover   100   %   of   the   territory.   This
 e

xplains   the   loss   of   reception   of   a   station
 t

hat   can   occur   during   a   journey.
Receiving TA messages
Press the TA button to activate or
deactivate   traffic   messages.
The
  TA   (Traffic   Announcement)  
f

unction   gives   priority   to   TA   alert  
m

essages.   To   operate,   this   function  
n

eeds   good   reception   of   a   radio   station  
t

ransmitting   this   type   of   message.  
W

hen   a   traffic   report   is   transmitted,   the  
c

urrent   audio   source   (Radio,   CD,   ...)  
i

s
 
interrupted   automatically   to   play   the  
T

A
 
message.   Normal   playback   of   the  
a

udio   source   resumes   at   the   end   of   the  
t

ransmission   of   the   message.
Audio and Telematics

Page 342 of 450

Media
USB player
This unit consists of a USB port
and  an   auxiliary   Jack   socket,  
d

epending   on   model.
Insert
  a   USB   memory   stick   into   the   USB   port  
o

r   connect   a   USB   peripheral   device   to   the   USB  
p

ort   using   a   suitable   cable   (not   supplied).
The
 
system   creates   playlists  
(

temporary   memory),   which   can   take  
f

rom
 
a
 
few   seconds   to   several   minutes  
o

n
 
the
 
first   connection.
Reducing
  the   number   of   non-music  
f

iles
 
and   the   number   of   folders   reduces  
t

his
 
waiting   time.   Playlists   are   updated  
e

very
 
time   the   ignition   is   switched   off   or  
a

 
USB
 
memory   stick   is   connected.
The
 
lists   are   memorised:   if   the   lists   are  
n

ot
 
changed,   the   subsequent   loading  
t

ime
 
is
 
reduced. Press
  and   hold   REFRESH LIST to
display
  the   different   classifications.
Select by " Folder"
  /   "Artist "
  /  
"ge

nre"
  /  
"Pl

aylist".
Press OK to select the classification
required,
  then   press   OK
 
again   to  
c

onfirm. Press REFRESH LIST
briefly to
display   the   previously   selected  
c

lassification.
Navigate
  through   the   list   using   the  
l

eft /right   and   up/down   buttons.
Confirm
  the   selection   by   pressing  
O

K.
Press
  one   of   these   buttons   to   gain  
a

ccess   to   the   previous   /   next   track   in  
t

he   list.
Press
  and   hold   one   of   the   buttons   for  
f

ast   for ward   or   back.
Press one of these buttons to
gain
  access   to   the   previous   /   next  
"Fo

lder"
  /   "Artist "
  /   "
ge
nre"
  /  
"Pl

aylist"
  in   the   list.

Page 343 of 450

341
Auxiliary socket (AUX)
Connect the portable device (MP3 player, …) to the   auxiliary   Jack   socket   using   an   audio   cable  
(

not
 sup
plied).Press the SOURCE button several
times
  in   succession   and   select   AUX.
First
  adjust   the   volume   on   your   portable   device  
(

to   a   high   level).   Then   adjust   the   volume   on  
y

our   audio   system.   Operation   of   controls   is   via  
t

he   portable   device.
Do
  not   connect   a   device   to   both   the  
J

ack   auxiliary   socket   and   the   USB   port  
a

t   the   same   time.
Cd player
Insert circular compact discs only.
S ome   anti-pirating   systems,   on   original   discs  
o

r   CDs   copied   using   a   personal   recorder,   may  
c

ause faults which are no reflection on the
quality
  of   the   vehicle's   player.
Insert
  a   CD   in   the   player,   play   begins  
au

tomatically. To
  play   a   disc   which   has   already  b
een   inserted,   press   the   SOURCE
button
  several   times   in   succession  
a

nd   select   C d
.
P

ress one of the buttons to select a
track
  on   the   CD.
Press the LIST REFRESH button to
display
  the   list   of   tracks   on   the   CD.
Press
  and   hold   one   of   the   buttons   for  
f

ast   for ward   or   fast   back.
Audio and Telematics

Page 344 of 450

The audio system will only play files with the   extension   ".mp3"   with   a   sampling   rate   of  
2

2.05 KHz   or   44.1   KHz.   No   other   type   of   file  
(

.wma,   .mp4,   .m3u...)   can   be   played.
It
  is   advisable   to   restrict   file   names   to  
2

0 characters   without   using   special   characters  
(

e.g.   "   ?   ;   ù)   to   avoid   any   playing   or   displaying  
pro

blems.
In
  order   to   be   able   to   play   a   recorded   CDR  
o

r   CDRW,   when   recording,   the   ISO   9660  
l

evel 1. 2   or   Joliet   file   format   is   recommended.
If
  the   disc   is   recorded   in   another   format,   it   may  
n

ot   be   played   correctly.
It
  is   recommended   that   the   same   recording  
f

ormat   is   always   used   for   an   individual   disc,  
w

ith   as   low   a   speed   as   possible   (4x   maximum)  
f

or   optimum   sound   quality.
In
  the   particular   case   of   a   multi-session   CD,   the  
J

oliet   format   is   recommended.
Information and advice
To play a disc which has already been   inserted,   press   the   SOURCE
button
  several   times   in   succession  
a

nd   select   C d
.
P

ress one of the buttons to select a
folder
  on   the   CD.
Press one of the buttons to select a
track
  on   the   CD.
Press the LIST REFRESH button to
display
  the   list   of   directories   of   the  
M

P3   compilation.
Press
  and   hold   one   of   the   buttons   for  
f

ast   for ward   or   backward   play.
Playing an MP3 Cd
compilation
Insert an MP3 CD compilation in the player.
T he   audio   equipment   searches   for   all   of   the  
m

usic  
t
racks,  
w
hich  
m
ay  
t
ake  
a
nything  
b
etween  
a

  few   seconds   and   several   tens   of   seconds,  
b

efore   play   begins.
On
  a   single   disc,   the   CD   player   can  
r

ead   up   to   255   MP3   files   spread   over  
8

  folder   levels.   However,   it   is   advisable  
t

o   keep   to   a   limit   of   two   levels   to   reduce  
t

he   access   time   before   the   CD   is  
p

layed.
While
  the   CD   is   being   played,   the   folder  
s

tructure   is   not   followed.
All
  of   the   files   are   displayed   on   a   single  
l

evel.

Page 345 of 450

343
Use only USB memory sticks formatted FAT32 (File   Allocation   Table).
It
  is   recommended   that   you   use  
g

enuine
 A
pple
® USB cables for correct
operation.
*
  
I
n   certain   cases,   play   of   the   audio   files   must  
b

e   initiated   from   the   keypad.
**
  If   the   telephone   supports   the   function.
Bluetooth® audio streaming
Streaming allows music files on the telephone to   be   played   via   the   audio   system.
Connect
  the   telephone:   see   the   "Telephone "
section.
Select in the " Bluetooth : Telephone - Audio"
menu
  the   telephone   to   be   connected.
The
  audio   system   connects   to   a   newly   paired  
t

elephone
 a
utomatically.
Control
  of   tracks   to   be   played   is   via   the   buttons  
o

n   the   audio   system   control   panel   and   the  
s

teering   mounted   controls**.   The   contextual  
i

nformation   can   be   displayed   in   the   screen.
Activate
  the   streaming   source   by  
p

ressing   the   SOURCE
 b
ut to n*.
Connecting Apple® players
Connect the Apple® player to the USB port
using
 
a
 
suitable
 
cable   (not   supplied).
Play
 
starts
 
automatically.
Control
 
is
 
via
 
the
 
audio   system.
The classifications available are those of the
portable
 
device
 
connected   (artists   /   albums   /  
g

enres
 
/
 
playlists
 
/
 
audiobooks   /   podcasts).
The
 
version
 
of
 
software   in   the   audio   system  
m

ay
 
not
 
be
 
compatible   with   the   generation   of  
y

our Apple
® player.
Audio and Telematics

Page 346 of 450

Telephone
Pairing a Bluetooth® telephone
Screen C
(Available according to model and version)
As a safety measure and because they require   prolonged   attention   on   the   part  
o

f   the   driver,   the   operations   for   pairing  
o

f   the   Bluetooth   mobile   telephone   with  
t

he   Bluetooth   hands-free   system   of  
y

our   audio   equipment   must   be   carried  
o

ut   with   the   vehicle   stationary   and   the  
ig

nition
 o
n.
Go
 
to
 
www.citroen.co.uk   for   more   information  
(

compatibility,   more   help,   ...).
Activate
  the   telephone's   Bluetooth   function  
a

nd
 
ensure   that   it   is   "visible   to   all"   (telephone  
c

onfiguration). Press the ME
n

U
 
button. In
  the   menu,   select:
-  "Bl
uetooth: Telephone - Audio "
-
 
"B

luetooth configuration"
-
 
"P

erform a Bluetooth search"
A
  window   is   displayed   with   a   message   that   a  
s

earch   is   in   progress.
The
  services   available   depend   on  
t

he   network,   the   SIM   card   and   the  
c

ompatibility   of   the   Bluetooth   device  
u

sed.
Consult
  your   telephone's   manual   and  
y

our   operator   to   find   out   which   services  
a

re   available   to   you.
*
 
If
 
your   telephone   is   fully   compatible. The
  first   4   telephones   recognised   are   displayed  
i

n   this   window.
The " Telephone "
  menu   permits   access   to   the  
f

ollowing   functions   in   particular:   "
dir
ectory" *,
" Calls list ", "Consult the paired equipment ".Select
  the   telephone   to   be   connected   from   the  l
ist.   Only   one   telephone   can   be   connected   at  
a

  time.
A
  virtual   keypad   is   displayed   in   the   screen:  
e

nter   a   code   with   at   least   4   digits.
Confirm
  by   pressing   OK.
A
 

message
 
in
 
the
 
screen
 
indicates
 
the
 
telephone
 c

hosen.   To   accept   the   pairing,   enter   the   same
 c

ode   on   the   telephone,   then   confirm   with   OK.
If
  pairing   fails,   the   number   of   attempts   is   not
 l

imited.
A
  message   that   the   pairing   has   been  
s

uccessful   appears   in   the   screen.
The
  automatic   connection   authorised   is   only  
a

ctive   after   the   telephone   has   been   configured.
The
  directory   and   the   call   list   can   be   accessed  
a

fter   the   necessary   synchronisation   period.

Page 347 of 450

345
Receiving a call
An incoming call is announced by a ring and a superimposed   display   in   the   screen.
Select the YES
 

tab   on   the   display  
u

sing   the   buttons.
Confirm
  by   pressing   OK.
Press
  this   button   at   the   steering  
m

ounted   controls   to   accept   the   call.
Making a call
From the "Bl uetooth: Telephone - Audio "
menu.
Select " Manage the telephone call".
Select " Call".
Or
Select " Calls list ".
Or
Select "
dir

ectory".
Press
  this   button   for   more   than  
t

wo seconds   for   access   to   your  
d

irectory,   then   navigate   using   the  
t

humb   wheel.
Or
To
  dial   a   number,   use   your   telephone's   keypad,  
w

ith   the   vehicle   stationary.
Ending a call
During a call, press this button for more   than   2   seconds.
Confirm
 
with   OK
 
to   end   the   call.
The
  system   accesses   the   telephone's  
c

ontacts   directory,   depending   on   its  
c

ompatibility,   and   while   it   is   connected  
b

y
 
Bluetooth.
With
  certain   telephones   connected   by  
B

luetooth   you   can   send   a   contact   to   the  
d

irectory   of   the   audio   system.
Contacts
  imported   in   this   way   are  
s

aved   in   a   permanent   directory  
v

isible to all, whatever the telephone
connected.
The
  menu   for   the   directory   is   not  
a

ccessible   if   it   is   empty.
Audio and Telematics

Page 348 of 450

Screen menu map(s)
Radio- Cd
REg mode
C
d rep
eat
Shuffle play
Vehicle config*
R wiper in rev
Options
diagnostic
R
dS
options
View
Abandon
1
2
3
3
1
2
2
2
2
1
2
Screen A
*  The   settings   vary   according   to   the   trim   level   of  t
he   vehicle.
gu

ide lighting
2
Units
Temperature: °Celsius / °Fahrenheit
Fuel consumption: KM/L - L/100 - MP
g
1
2
2
display adjust
Month
day
H

our
Minutes Ye a r
12 H/24 H mode
Language
Italiano
ned
erlands
Portuguès
Português do Brasil Français
de

utsch
ÄŒeština English
Hr vatski Español
Magyar
1
2
2
2
2
2
2
2
1
2
2
2
2
2
2
2
2
2
2

Page 349 of 450

347
Screen C
Press the OK dial   for   access   to  s
hort-cut   menus   according   to   the  
d

isplay   on   the   screen.
activate / deactivate R
dS
a

ctivate / deactivate RE
g
mode
activate / deactivate radiotext
Radio
activate / deactivate Intro
Cd / MP3 Cd
activate / deactivate track repeat
(the   entire   current   CD   for   CD,   the   entire  
c

urrent   folder   for   MP3   CD)
activate / deactivate random play
(the
  entire   current   CD   for   CD,   the   entire  
c

urrent   folder   for   MP3   CD) activate / deactivate track repeat (of
  the  c
urrent   folder   /   artist   /   genre   /   playlist)
USB
activate / deactivate random play (of the c
urrent   folder   /   artist   /   genre   /   playlist)
1
1
1
1
1
1
1
1
Audio and Telematics

Page 350 of 450

Screen C
Audio functions
Alternative frequencies (RDS)
A ctivate   /   deactivate
FM
preferences
Regional   mode   (REG)
Activate
  /   deactivate
Radio-text
  information   (RDTXT)
Activate
  /   deactivate
1
2
3
4
3
4
3
4
Play modesAlbum   repeat   (RPT)
Activate
  /   deactivate
Track
  random   play   (RDM)
Activate
  /   deactivate2
3
4
3
4
Enter distance to destination1
1
1
2
2
2
Pressing the MEn U  button   displays:
Audio functions Trip computerdistance: x miles
Vehicle diagnosis
Warning log
Systems activated or deactivated
State of systems

Page:   < prev 1-10 ... 301-310 311-320 321-330 331-340 341-350 351-360 361-370 371-380 381-390 ... 450 next >