display Citroen JUMPY MULTISPACE 2010 2.G Repair Manual
Page 200 of 235
9.44
0 2 GENERAL OPERATION
For a detailed global view of the menus available, refer to section 10.
Press the MODE button several times in succession to gain access to the following menus:
For maintenance of the display, the use of a soft, non-abrasive cloth (spectacles cloth) is recommended, without any addi tional product.
RADIO/MUSIC MEDIA PLAYERS
PHONE (If a conversation is in progress)
TRIP COMPUTER
FULL SCREEN MAP
N A V I G A T I O N (If navigation is in progress)
S E T U P : system language, date and time, display, vehicle parameters, units and system parameters, DEMONSTRATION MODE
T R A F F I C : TMC information and messages
Page 201 of 235
0 2
1
2
3
3
2
1
1
1
3
2
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
1
1
2
1
2
2
2
2
2
2
2
1
1
1
1
1
1
9.45
GENERAL OPERATION
A press on the OK dial to permits access to short-cut menus according to the display on the screen.
T R I P C O M P U T E R :
ALERT LOG
STATUS OF FUNCTIONS
M U S I C M E D I A P L A Y E R S :
TA
PLAY OPTIONS
NORMAL
RANDOM TRACK
REPEAT FOLDER
TRACK INTRO
SELECT MUSIC
N A V :
ABORT GUIDANCE
R E P E A T A D V I C E
BLOCK ROAD
ROUTE INFO
S H O W D E S T .
TRIP INFO
r o u t e t y p e
a v o i d a n c e c r i t e r i a
s a t e l l i t e s
ZOOM/SCROLL
V O I C E A D V I C E
ROUTE OPTIONS
R A D I O :
IN FM MODE
TA
RDS
RADIOTEXT
R E G I O N A L P R O G . ( R E G )
AM
IN AM MODE
TA
REFRESH AM LIST
FM
M A P :
ABORT/RESUME GUIDANCE
SET DESTINATION
POIS NEARBY
POSITION INFO
MAP SETTINGS
ZOOM/SCROLL
P H O N E :
END CALL
HOLD CALL
DIAL
DTMF TONES
P R I V A T E M O D E
MICRO OFF
DISPLAY ACCORDING TO THE CONTEXT
Page 208 of 235
9.52
0 3
6
4
5
1
2
3
N A V I G A T I O N S E T T I N G S
Select the "Navi volume" function and turn the dial to set the volume of each v o i c e s y n t h e s i s e r ( t r a f fi c i n f o r m a t i o n , alert messages…).
Select "Set parameters for risk areas" to gain access to the "Display on map", "Visual alert" and "Sound alert" functions.
Select the "POI categories on Map" function to select the POIs to be displayed on the map by default.
N A V I V O L U M E
Press the NAV button.
Press the NAV button again or select the "Navigation" Menu function and p r e s s t h e d i a l t o c o n fi r m .
Select the "Settings" function and p r e s s t h e d i a l t o c o n fi r m .
" N A V I G A T I O N " M E N U
SETTINGS
POI CATEGORIES ON MAP
SET PARAMETERS FOR RISK AREAS
N A V I G A T I O N - G U I D A N C E
Contact a CITROËN dealer for details of the procedure for obtaining the RISK AREA POIs. Updating of the RISK AREA POIs requires an SDHC (H igh Capacity) compatible reader.
Page 209 of 235
0 4
1
2
5
4
3
9.53
TRAFFIC INFORMATION
CONFIGURE THE FILTERING AND
DISPLAY OF TMC MESSAGES
T h e n s e l e c t t h e r a d i u s o f t h e fi l t e r (in miles (km)) required in accordance with the route, press the dial to c o n fi r m . When all of the messages on the route are selected, the addition of a g e o g r a p h i c a l fi l t e r i s r e c o m m e n d e d (within a radius of 3 miles (5 km) for example) to reduce the number of messages displayed on the map. T h e g e o g r a p h i c a l fi l t e r f o l l o w s t h e movement of the vehicle.
Press the TRAFFIC button again or s e l e c t t h e " T r a f fi c " M e n u f u n c t i o n a n d p r e s s t h e d i a l t o c o n fi r m .
G E O . F I L T E R
Press the TRAFFIC button.
T h e fi l t e r s a r e i n d e p e n d e n t a n d t h e i r r e s u l t s a r e c u m u l a t i v e . W e r e c o m m e n d a fi l t e r o n t h e r o u t e a n d a fi l t e r a r o u n d t h e v e h i c l e o f : - 2 m i l e s ( 3 k m ) o r 3 m i l e s ( 5 k m ) f o r a r e g i o n w i t h h e a v y t r a f fi c , - 6 m i l e s ( 1 0 k m ) f o r a r e g i o n w i t h n o r m a l t r a f fi c , - 30 miles (50 km) for long journeys (motorway).
Select the "Geo. Filter" function and p r e s s t h e d i a l t o c o n fi r m .
T h e l i s t o f T M C m e s s a g e s a p p e a r s u n d e r t h e " T r a f fi c " M e n u s o r t e d T h e l i s t o f T M C m e s s a g e s a p p e a r s u n d e r t h e " T r a f fi c " M e n u s o r t e d in order of proximity.
S e l e c t t h e fi l t e r o f y o u r c h o i c e :
MESSAGES ON ROUTE
ALL WARNING MESSAGES
ONLY WARNING ON ROUTE
ALL MESSAGES
The messages appear on the map and on the list. To exit, press ESC.
"TRAFFIC" MENU
The TMC icon, at the bottom left of the scthe screen, may appear in 3 different forms: - No TMC station available, - TMC station available, no message on re on route, - TMC station available and messages onges on route (if guidance is active).
Page 210 of 235
9.54
11
2
3
0 5
SELECTING A STATION
When the current radio station is displayed on the screen, press the dial.
The radio source short-cuts menu appears and providesovides access to the following short-cuts:
Select the function required and press t h e d i a l t o c o n fi r m t o g a i n a c c e s s t o the corresponding settings.
TRAFFIC INFO (TA)
The RDS, if displayed, allows you to continue listening tning to the same station by automatic retuning to alternative freque ncies.ncies. However, in certain conditions, coverage of an RDS station may not y not be assured throughout the entire country as radio stations do not conot cover 100 % of the territory. This explains the loss of reception of the stathe station during a journey.
The external environment (hill, building, tunnel, underground car park...) may interfere with the reception, including in RDS following mode. This ph enomenon is a normal result of the way in which radio waves are transmitted and does not in any way indicate a failure of the audio equipment.
R D S - R E G I O N A L M O D E - T R A F F I C I N F O
Press the RADIO button to display the list of stations received locally sorted in alphabetical order. Select the station required by turning t h e d i a l a n d p r e s s t o c o n fi r m .
AM
R E G I O N A L P R O G .
RADIOTEXT
RDS
While listening to the radio, press one of the buttons to select the previous or next station on the list.
Press one of the buttons on the numeric keypad for moor more than2 seconds to store the current station. Press the button on the numeric keypad to recall the stothe stored radio station.
RADIO
A long press of one of the buttons starts the automatic search for a station with a lower or higher frequency.
Page 211 of 235
0 6
9.55
MUSIC MEDIA PLAYERS
C D , M P 3 / W M A C D
I N F O R M A T I O N A N D A D V I C E
In order to be able to play a recorded CDR or CDRW, wRW, when recording it is preferable to select the ISO 9660 level 1, vel 1, 2 or Joliet standard. If the disc is recorded in another format it may not be plat be played correctly. It is recommended that the same recording standard is ard is always used for an individual disc, with as low a speed as possible (4ible (4x maximum) for optimum sound quality. In the particular case of a multi-session CD, the Joliet stoliet standard is recommended.
T h e M y W a y w i l l o n l y p l a y a u d i o fi l e s w i t h t h e e x t e n s i o n " . m p 3 " w i t h T h e M y W a y w i l l o n l y p l a y a u d i o fi l e s w i t h t h e e x t e n s i o n " . m p 3 " w i t h a speed of between 8 Kbps and 320 Kbps and the extee extension ".wma" with a speed of between 5 Kbps and 384 Kbps.
The MP3 format, an abbreviation of MPEG 1, 2 & 2.5 A 2.5 Audio Layer 3 and the WMA format, an abbreviation of Windows Medi Media Audio and the property of Microsoft, are audio compression standastandards which p e r m i t t h e r e c o r d i n g o f s e v e r a l t e n s o f m u s i c fi l e s o n a s i n g l e d i s c . p e r m i t t h e r e c o r d i n g o f s e v e r a l t e n s o f m u s i c fi l e s o n a s i n g l e d i s c .
It also supports the VBR (Variable Bit Rate) mode. N o o t h e r t y p e o f fi l e ( . m p 4 , . m 3 u . . . ) c a n b e p l a y e d .
I t i s a d v i s a b l e t o r e s t r i c t fi l e n a m e s t o 2 0 c h a r a c t e r s , w i t h o u t u s i n g o f I t i s a d v i s a b l e t o r e s t r i c t fi l e n a m e s t o 2 0 c h a r a c t e r s , w i t h o u t u s i n g o f special characters (e.g. : " " ? ; ù) to avoid any playing aying and displaying problems.
Page 212 of 235
9.56
1
2
3
5
4
6
SELECTING/PLAYING MUSIC
C D , M P 3 / W M A C D
The playing and displaying of an MP3/WMA compilationilation may depend on the recording programme and/or the settin gsettings used. W e r e c o m m e n d t h e I S O 9 6 6 0 fi l e s t a n d a r d .
Press the MUSIC button.
Select the "Select music" function and p r e s s t h e d i a l t o c o n fi r m .
Press the up or down button to select the next/previous folder.
Select the music source required: CD, MP3/WMA CD. Press the dial to c o n fi r m . P l a y b e g i n s .
SELECT MUSIC
Press the MUSIC button again or select the "Music" Menu function and p r e s s t h e d i a l t o c o n fi r m .
Press one of the buttons to select a music track. Press and hold one of the buttons for fast forward or rewind play. "MUSIC" MENU
T h e l i s t o f t r a c k s o r M P 3 / W M A fi l e s a p p e a r s u n d e r " M u s i c " M e n u . T h e l i s t o f t r a c k s o r M P 3 / W M A fi l e s a p p e a r s u n d e r " M u s i c " M e n u .
Page 213 of 235
1
2
3
4
1
4
0 6
2
3
5
9.57
Connect the portable equipment (MP3/WMA player…) ter…) to the audio sockets (white and red, RCA type) in the glove box usinx using aJACK/RCA audio cable.
Press the MUSIC button then press it again or select the "Music" Menu f u n c t i o n a n d p r e s s t h e d i a l t o c o n fi r m .
Select the AUX music source and p r e s s t h e d i a l t o c o n fi r m . P l a y b e g i n s automatically.
Select the "External device" function and press the dial to activate it.
E X T E R N A L D E V I C E
Insert one or more CDs in the changer. Press the MUSIC button.
Press one of the buttons on the numeric keypad to select the corresponding CD.
Select the CD CHANGER music s o u r c e a n d p r e s s t h e d i a l t o c o n fi r m .
The display and management of the controls is via the pa the portable equipment.
CD CHANGER
Select the SELECT MUSIC function a n d p r e s s t h e d i a l t o c o n fi r m .
U S I N G T H E E X T E R N A L D E V I C E ( A U X )
AUDIO/RCA CABLE NOT SUPPLIED
CD CHANGER
P L A Y I N G A C D ( N O T M P 3 / W M A C O M P A T I B L E )
SELECT MUSIC
Press the MUSIC button again or select the MUSIC MENU function and p r e s s t h e d i a l t o c o n fi r m .
MUSIC MENU
MUSIC MEDIA PLAYERS
Page 214 of 235
9.58
0 7
1
3
5
4
2
1
2
The services available depend on the network, the SIM card and the compatibility of the Bluetooth equipment used. Refer to your telephone's manual an d your operator to check which services you have access to. A list of mobile telephones which offer the best range of services is available from dealers.
BLUETOOTH TELEPHONE
CONNECTING A TELEPHONE
For safety reasons and because they require prolon gedonged attention on the part of the driver, the operations for pairing the Blue Bluetooth mobile telephone to the hands-free system of the MyWay mus t must be carried out with the vehicle stationary and the ignition on.
Activate the telephone's Bluetooth function. The last telephone connected is reconnected automatically.
Select the TELEPHONE MENU f u n c t i o n a n d p r e s s t h e d i a l t o c o n fi r m .
TELEPHONE MENU
Enter the authentication code on the telephone. The code to be entered is displayed on the screen.
To change the telephone connected, press the PHONE button, then select TELEPHONE MENU and press the d i a l t o c o n fi r m .
Once the telephone has been connected, MyWay can s can synchronise the address book and the call list. This synchronis ation ation may take a few minutes.
Select CONNECT PHONE. Select the t e l e p h o n e a n d p r e s s t o c o n fi r m . The list of telephones connected previously (4 max imumximum) appears on the multifunction display. Select the telephone requir required for a new connection.
Press the PHONE button.
F o r a fi r s t c o n n e c t i o n , s e l e c t SEARCH PHONE and press the dial t o c o n fi r m . T h e n s e l e c t t h e n a m e o f the telephone.
SEARCH PHONE
CONNECT PHONE
Page 215 of 235
2
3
11
2
3
9.59
Press the end of the steering mounted control to accept the call or end the call in progress.
Select the "Yes" tab to accept or "No" t o r e f u s e a n d c o n fi r m b y p r e s s i n g t h e dial.
R E C E I V I N G A C A L L MAKING A CALL
An incoming call is announced by a ring and a superimpperimposed display on the multifunction screen.
YES
To hang up, press the PHONE button or press the dial and select "End call" t h e n c o n fi r m b y p r e s s i n g t h e d i a l .
END CALL
Press the PHONE button.
Press the end of the steering wheel control for more thare than two seconds to gain access to the address book.
It is also possible to select a number from the address bress book. You can select "Dial from address book". The MyWay permits theits the recording of up to 4 000 entries.
Select "Dial number", then dial the telephone number using the virtual keypad.
Select the "Phone" Menu function and p r e s s t h e d i a l t o c o n fi r m .
DIAL NUMBER
"PHONE" MENU
The list of the last 20 calls made and received in the vehhe vehicle appears under "Phone" Menu. You can select a number and pre sd press the dial to make the call.
NO