cruise control Citroen NEMO 2008.5 1.G Owner's Manual

7
Familiarisation
FAMILIARISATION
INTERIOR
Trip computer
By means of the MENU button, this system
permits management or consultation of the
various vehicle confi gurations/information such
as the disarming of the passenger air bag, the
automatic locking of the doors, the language, etc.
 61
Retractable multifunction passenger seat (Light van)
This equipment enables you to confi gure your
passenger seat in three positions:
- seat for the transportation of a passenger,
- table to accommodate your various documents, etc.
- retracted for the transportation of long objects.
 73
Cruise control/speed limiter
These systems allow you to control your
vehicle’s speed using programmed values.
 45, 48
Audio system
This equipment benefi ts from the latest
technology: MP3 compatible audio equipment
and Bluetooth® hands-free kit. ®
 66
Electronic gearbox system
This equipment guarantees perfect driving
by combining a fully automatic mode and a
manual mode.
 43

8
Familiarisation
INSTRUMENTS AND CONTROLS
1. Steering wheel adjustment control.
2. Lights and direction indicators controls.
3. Instrument panel.
4. Driver’s air bag.
Horn.
5. Cruise control, speed limiter controls.
6. Gear lever.
7. Handbrake.
8. Bonnet release.
9. Exterior mirror controls.
10. Fuse box.
11. Manual headlamp height adjustment.
12. Adjustable and closeable side vent.
13. Front side window demisting vent.
14. Windscreen demisting vent.
15. Steering lock and ignition.
16. Wipers/wash-wipe/trip computer controls.
17. Adjustable and closeable central vents.
18. Passenger air bag.
19. MENU button.
20. Glove box.
21. Lighter.
22. Ashtray.
23. Heating/air conditioning controls.
24. Audio equipment.
25. Electric window controls.
26. 12 V socket.

18
Familiarisation
DRIVE SAFELY
Cruise control "CRUISE"
1. Selection/switching off of cruise control.
2. Programming a speed/Reducing the
programmed speed.
3. Programming a speed/Increasing the
programmed speed.
4. Cruise control on/off.
To programme or activate cruise control, the
vehicle’s speed must be over 40 km/h
(25 mph), with at least 4th gear engaged
(2 nd
gear for electronic gearbox system).
45 48
1.
Selection/switching off of speed limiter.
2. Reducing the programmed speed.
3. Increasing the programmed speed.
4. Speed limiter on/off.
Adjustments can only be made with the engine
running.
Speed limiter "LIMIT"
Cruise control or speed limiter mode is
displayed on the instrument panel when the
function is selected.
Instrument panel display
Cruise control
Speed limiter

20
Instruments and controls
Instrument panel with level 3 display
Instrument panel display level 3
- Cruise control/speed limiter,
- Time,
- Date,
- Radio,
- Kilometres/miles travelled,
- Outside temperature,
- Modes and gears selected in electronic gearbox system, - Trip computer/range, fuel consumption,
average speed,
- Headlamp height,
- Programmable overspeed warning,
- Selection of display language,
- Arming or disarming of passenger air bag,
- Arming or disarming of automatic door locking while driving.

25
1
READY TO SET OFF
Instruments and controls
Warning lightis indicates Solution - action
Direction indicators flashing with buzzer.
a change of direction using the lights stalk, to the left of the steering wheel.
To the Right: press the stalk upwards. To the Left: press the stalk downwards.
Front fog lamps on. that the button on the fascia panel has been pressed.
Manual selection. The fog lamps only operate if the side lights or dipped headlamps are on.
Rear foglamps on. that the button on the fascia panel has been pressed.
Manual selection. The lamps only operate if the dipped beams are on. When visibility is normal, please switch the fog lamps off to avoid breaking the law. This light is a dazzling red.
Faulty bulb on, accompanied by a message on the display.
that one or more bulbs have blown.
Have the bulb changed. Refer to the "Changing a bulb" section of chapter 7 or consult a CITROËN dealer .
Cruise control on. cruise control selected.Manual selection. Chapter 1, "Gearbox and
steering wheel" section.
Speed limiter on. speed limiter selected. Manual selection. Chapter 1, "Gearbox and
steering wheel" section.

1
READY TO SET OFF
Gearbox and steering wheel
Function selected,
"Cruise control" warning lamp displayed.
Function deactivated,
OFF (e.g. 107 km/h).
Function activated
(e.g. 107 km/h). Speed exceeded
(e.g. 118 km/h),
the programmed speed flashes.
CRUISE CONTROL "CRUISE"
This driving aid enables you to
maintain a constant programmed
speed when driving in free-flowing
traffic, except when on a steep
incline.
To programme or activate cruise control,
the vehicle’s speed must be over 25 mph
(40 km/h), with at least 4th gear engaged
(2nd gear for electronic gearbox system).
The status of the function and the
programmed speed is displayed on the
instrument panel: Operational fault detected,
OFF
- the dashes flash.

46
Gearbox and steering wheel
Selecting the function
- Turn the ring to CRUISE position. Cruise
control is selected but is not yet activated
and no speed is programmed.
Temporarily exceeding the speed
It is possible to accelerate and to temporarily
exceed the programmed speed.
The programmed value fl ashes.
When the accelerator pedal is released, the
vehicle returns to the programmed speed.
Reactivation
- Having deactivated cruise control, press on this button.
Your vehicle will return to the last
programmed speed.
Or, you may also re-start the procedure from
"1st activation".
1st activation/programming a speed
- Reach the desired speed by pressing on the
accelerator.
- Move the control up (+) or down (-) to memorise it.
The speed is programmed/activated and the
vehicle will maintain this speed.
Deactivation (off)
- Press on this button or on the brake or clutch
pedal.

1
READY TO SET OFF
Gearbox and steering wheel
Modifying the programmed speed
To memorise a higher
speed than that already
memorised, there are
2 options:
Without using the accelerator:
- Move the control up (+).
A short press increases the speed by 1 mph.
Holding it down increases the speed in steps
of 5 mph.
Using the accelerator:
- Exceed the memorised speed until you reach the desired speed,
- Move the control up (+) or down (-).
To memorise a lower speed than that
already memorised:
- Move the control down (-).
A short press decreases the speed by
1 mph.
Holding it down decreases the speed in
steps of 5 mph.
Stopping the function
- Turn the ring to OFF position or switch off
the ignition.
Cancelling the programmed speed
With the vehicle stationary, having switched
off the ignition, no speed is memorised by
the system.
Operational fault
The programmed speed disappears and is
replaced by dashes. Contact a CITROËN
dealer to have the system checked.
Good practice
When modifying the programmed speed by
holding down the control, remain vigilant as
the speed may increase or decrease rapidly.
Do not use cruise control on slippery roads
or in heavy traffic.
On a steep slope, cruise control may not be
able to prevent the vehicle exceeding the
programmed speed.
Cruise control can in no way replace
respect for speed limits, nor vigilance or
responsibility on the part of the driver.
You are advised to keep your feet near to
the pedals.
To avoid any obstruction of the pedals:
- ensure that the mat and its floor fixings are correctly positioned,
- never stack up more than 1 mat.