DACIA SUPERNOVA 2004 Repair Manual

75
FRONT SEATS FRAMES AND R UNNERS
75-1
CO
NTROL/ADJUSTMENT
The front seats, equipping DACIA NOVA vehicles, have two possibilities of adjustment:
- front or rear longitudinal movement ,which can be performed by lever’s operation (1);
- seat back overturning up to the horizontal position, by rotating the round button (2).
DISMOUNTING
For dismounting, the seat will be placed in the middle position by lever’s (1) lifting and per-
form the following operation s:
Remove the lateral cross bar protector (3) by dismounting the metal screws (4 ) .
Dismount screws (5), which are fixing the seat on the central and lateral cross bar.
Release the front seat.
REMOUNTING
Perform in the reverse order the dismounting operations.
41
2
3
FRONT SEATS
vnx.su

75
FRONT SEATS FRAMES AND R UNNERS
75-2
FRONT SEAT SLIDES GUIDES
DISMOUNTING
Di smount the attachment screws (4) of the
slides guides (1) and (2) on the front seat, by
acting upon the control lever (3) and move the
slide guides in one way or the other as required.
Release s lides guides from the front seat.
REMOUNTING
Perform in the reverse order the dismounting
operations.
1
3
24
vnx.su

75
FRONT SEATS FRAMES AND R UNNERS
FRONT SEAT ARMATURE
DISMOUNTING
Dismount the front seat off the vehicle.
Dismount slides guides from the seat.
Remove the upholstery.
Detach the quilt from the seat armature.
Release t he front seat armature.
REMOUNTING
Perform in the reverse order the dismounting
operations.
1
75-3
vnx.su

76
REAR SEATS FRAMES AND RU NNERS
76-1
The rear bench is composed of two separated swinging seats, unequal and two separated,
unequal, swinging back rests.
DISMOUNTING
Di smount the seats, by swinging and by removing them from the welded supports on the
carriage body.
For the back rests dismounting perform the following operations: - lift the unlocking buttons (1), and swing out the back rests a head.
- dismount the four screws for the attachment of hinges on the wheels’ passage.
- remove the back rests from the central hinge
REMOUNTING
Perform in the reverse order the dismounting operations.
REAR BENCH
vnx.su

76
REAR SEATS FRAMES AND RU NNERS
76-2
DISMOUNTING
Dismount the bench seats and remove the upholstery from the seats quilts
(3 ) and (4).
Di smount the bench’s backs rests and remove t he upholstery from the back rests quilts (1)
and (2).
Release the reinforced quilts of the bench.
REMOUNTING
Perform in the reverse order the dismounting operations.
BENCH SEATS
vnx.su

77
FRONT SEAT TRIM
77-1
Detach the rods
(3) from the attachment clips (4) of the seats upholstery (7) on the quilt (14).
Detach the rods (6) from the attachment clips (5) of the seats upholstery with front seat
reinforcement. Remove the front seat upholstery from the seat quilt.
REMOUNTING
Perform in the reverse order the dismounting operations.
S
EATS UPHOLSTERY DISMOUNTING
1
2 10 11
8
5
6
4 12 13
7
3
14
9
vnx.su

77
FRONT SEAT TRIM
Dismount the button control for backrest swinging (2), releasing the screw, the washer, the
plate, and the backing plate.
Remove the sleeves for headrests from the pipes welded on the front seat reinforcement.
D etach the rods (9) also from the clips (8).
Detach at the second criss-cross arch level the rod (11) from the attachment clips (10) of the
back rest upholstery (12) on the back rest quilt (13) and remove the back rest upholstery.
REMOUNTING
Perform in the reverse order the dismounting operations.
77-2
BACK REST UPHOLSTERY DISMOUNTING
1
2 10 11
8
5
6
4 12 13
7
3
14
9
vnx.su

78
REAR SEAT TRIM
78-1
Remove by swinging
the seats (1 ) and (4).
D etach the attachment rods (16) and (11) of the seats upholstery (14 ) and (13) on the quilts
(8) and (7). Detach the a ttachment rods (15) and (12) of the seats on t he corresponding qui lts a nd re-
move the upholsters ( 14) and (13) from the seat quilts.
Remove the front seat upholstery from the seat quilt.
REMOUNTING
Perform in the reverse order the dismounting operations.
BACK REST UPHOSTERY DISMOUNTING
Dismount the backrest seats (2) and (3) from the central and lateral attachment screws.
Detach the rods (19) and (20) of the attachment back rests (2) and (3) of backrest upholstery
(8) and (9), the quilts (5), consequently (6).
D etach the rods ( 17) and (10) of the back rests upholstery on the corresponding quilts and
remove the upholstery (8) and (9) from the back rests quilts.
REMOUNTING
Perform in the reverse order the dismounting operations.
S
EAT UPHOLSTERY DISMOUNTING
1
2 10 11
8
5
6
4 12 13
7
3
14
9
vnx.su

78
REAR SEAT TRIM
78-2
Dismount the backrest seats
(2) and (3) from the central and lateral attachment screws.
Detach the rods (19) and (20) of the attachment back rests (2) and (3) of backrest upholstery
(8) and (9), the quilts (5), consequently (6).
D etach the rods ( 17) and (10) of the back rests upholstery on the corresponding quilts and
remove the upholstery (8) and (9) from the back rests quilts.
REMOUNTING
Perform in the reverse order the dismounting operations.
1
2 10 11
8
5
6
4 12 13
7
3
14
9
BACK REST UPHOSTERY DISMOUNTING
vnx.su

80
BATTERY - FRONT HEADLIGHTS
80 - 1
BATTERY
CHECKING
It is recommended to check the following: -cr acks or breaches of the battery box (case);
- the battery upper part cleanness;
- the plugs condition.
It is required to strictly check the following: -lack of plugs sulfate composite;
- proceed, is necessary to their cleaning and greasing;
- check the correct wiring plugs tightening at the battery plugs. The existence of an imperfect
contact may generate incidents at engine starting or at battery charging, sparks producing risk
being possible to occur, which may cause the battery explosion;
- check the electrolyte level.
For the batteries provided with access plugs, which may be dismounted, proceed as follows:
-r emove the plugs;
- check the electrolyte level in each element;
-i f n ecessary , refill the level, using only distill ed water, till maximum 1.5 cm above the plates.
AT TENT ION
N ever fill up with electrolyte, but only with distilled wat er.
PRECAUTIONS
It is important to know that: -the battery contains sulfuric acid which is a dangerous substance;
- during battery charging, oxygen and hydrogen are produced. The mixture of these two
gases is forming a detonate gas, which may lead to the explosion risk.
1. DANGER = ACID
The sulfuric acid solution is a very aggressive, toxic and corrosive product. This is a ttacking
the skin, the clothes and may lead to the corrosion of most of the metals. Also, it is very important, that, when you handle a battery , to consider the following precautions:
- protect the eyes by using protective glasses;
- wear anti-acid gloves and clothes. PARTICULARITIES
vnx.su