fuse DAEWOO MATIZ 2003 Service Workshop Manual

WIPERS/WASHER SYSTEMS 9D–5
DAEWOO M-150 BL2
WINDSHIELD/REAR WINDOW WIPER AND WASHER SYSTEM(Cont’d)
ConditionProbable CauseCorrection
Rear Wiper Does Not Work
The open or a short in the power
supply circuit to the fuse F9.
Repair or Replace the open or a
short in the power supply circuit to
the fuse F8.

Fuse F9 is blown.
Replace the fuse F9.

The circuit between the fuse F9
and the wiper/washer switch is the
open circuit or a short circuit.
Repair or Replace the wiring
harness.

Faulty wiper/washer switch.
Replace the wiper/washer switch.

The circuit between the
wiper/washer switch and the rear
window wiper motor is the open
circuit or a short circuit.
Repair or Replace the wiring
harness.

The circuit between the fuse F9
and the rear window wiper motor
is the open circuit or a short
circuit.
Repair or Replace the wiring
harness.

Faulty rear window wiper motor.
Replace the rear window wiper
motor.

Poor ground G403.
Repair or Replace the wiring
harness.
Rear Window Washer Does Not
Work, Rear Window Wiper OK
The open or a short in the power
supply circuit to the fuse F9.
Repair or Replace the open or a
short in the power supply circuit to
the fuse F9.

Fuse F9 is blown.
Replace the fuse F9.

The circuit between the fuse F9
and wiper/washer switch is the
open circuit or a short circuit.
Repair or Replace the wiring
harness.

Faulty wiper/washer switch.
Replace the wiper/washer switch.

The circuit between the
wiper/washer switch and the
windshield washer pump is the
open circuit or a short circuit.
Repair or replace the wiring
harness.

Faulty windshield washer pump.
Replace the windshield washer
pump.

Poor ground G102.
Repair or Replace the wiring
harness.

INSTRUMENTATION/DRIVER INFORMATION 9E–5
DAEWOO M-150 BL2
DIAGNOSTIC INFORMATION AND PROCEDURES
D19B301B
CIGAR LIGHTER
Condition Probable Cause Correction
Cigar Lighter Inoperative

The open or a short in the power supply
circuit to the fuse F7.

Repair or Replace the wiring
harness.

Fuse F7 is blown.
Replace the fuse F7.





The circuit between the fuse F7 and the
terminal 2 of the cigar lighter connector is
the open circuit or a short circuit.


Repair or Replace the wiring
harness.




Faulty the cigar lighter connector.

Repair or Replace the cigar
lighter connector.

Cigar lighter element is blown.
Replace the cigar lighter.





Open ground (G201) circuit.


Repair the open ground
circuit.

9E–6 INSTRUMENTATION/DRIVER INFORMATION
DAEWOO M-150 BL2
D19B302B
HVAC PANEL ILLUMINATION
Condition Probable Cause Correction
HVAC Panel Illumination
Inoperative
The open or a short in the power supply
circuit to the fuse Ef12.
Repair or Replace the wiring
harness.

Fuse Ef12 is blown.
Replace the fuse Ef12






The circuit between the fuse Ef12 and the
terminal 2 of the HVAC panel illumination
connector is the open circuit or a short
circuit.



Repair or Replace the wiring
harness.







Faulty the HVAC panel illumination
connector.



Repair or Replace the
instrument panel illumination
connector.

HVAC panel illumination bulb is blown.
Replace the bulb.

Open ground (G201) circuit.
Repair the open ground
circuit.

INSTRUMENTATION/DRIVER INFORMATION 9E–7
DAEWOO M-150 BL2
D19B304B
DIGITAL CLOCK
Condition Probable Cause Correction


Digital Clock Inoperative


The open or a short in the power supply
circuit to the fuse Ef2 regardless of the
ignition position.


Repair or Replace the power
supply circuit wiring harness.





The open or a short in the power supply
circuit to the fuse F1 with the ignition
position I.


Repair or Replace the power
supply circuit wiring harness.







The open or a short in the power supply
circuit to the fuse Ef12 with the interior
courtesy lamp ON.




Repair or Replace the power
supply circuit wiring harness.





The circuit between the fuse Ef2 and the
fuse F12 is open or short.


Repair or Replace the wiring
harness.

Fuse Ef2, Ef12, F1 or F12 is blown.
Replace and fuse.

The circuit between the fuse F12 and the
digital clock connector.
Repair or Replace the wiring
harness.




The circuit between the fuse F1 and the
digital clock connector.

Repair or Replace the wiring
harness.





The circuit between the Ef12 and the
digital clock connector.


Repair or Replace the wiring
harness.

Faulty digital clock.
Replace the digital clock.

Open ground (G201) circuit.
Repair the open ground
circuit.

9F –4 AUDIO SYSTEMS
DAEWOO M-150 BL2
DIAGNOSTIC INFORMATION AND PROCEDURES
AUDIO SYSTEM
ConditionProbable CauseCorrection
Audio System Inoperative
The power supply circuit to the
fuse Ef2 is open circuit or short
circuit.
Repair or Replace the power
supply wiring harness.

The fuse Ef2 is blown.
Replace the fuse.

The circuit between the fuse Ef2
and the fuse F11 is open or short.
Repair or Replace the wiring
harness.

The fuse F6 or the fuse F11 is
blown.
Replace the fuse.

The audio system circuit to the
fuse F6 or the fuse F11 is open
circuit or short circuit.
Repair or Replace the wiring
harness.

Poor ground G201.
Replace or Replace the wiring
harness.

Audio system is out of order.
Replace the audio system.
Cassette Player Inoperative,
Bad–quality tape.
Do not use a bad-quality tape.
AM/FM Functions OK
The cassette player destroy a
good–quality tape.
Clean the cassette player head,
the capstan, and the drive system.

Obstructions behind the tape door.
Remove the obstruction using
gentle force.

Cassette player is out of order.
Replace the audio system.
FM Does Not Work, AM and
Cassette OK
Audio system is out of order.
Replace the audio system.
AM Radio Does Not Work, FM
and Cassette OK
AM radio reception is poor (Using
a test antenna, test the AM radio
reception).
Replace the audio system.

AM radio reception is good (Using
a test antenna, test the AM radio
reception).
Replace the antenna cable
between the audio system and the
antenna.
Front Speakers Distorted or
Inoperative
Damage, rattles, or vibration of
the speaker and the door area.
Make the necessary repairs to
secure the component causing the
distortion.

The circuit between the front
speaker connector and the radio
connector is open circuit or short
circuit.
Repair or Replace the wiring
harness.

The connection of the front
speaker connector and the audio
connector is poor.
Confirm the connection.

Front speaker is out of order.
Replace the front speaker.

Audio system is out of order.
Replace the audio system.
Rear Speakers Distorted or
Inoperative
Damage, rattles, or vibration of
the rear speaker and the rear
parael side shelf.
Make the necessary repairs to
secure the component causing the
distortion.

The circuit between the rear
speaker connector and the radio
connector is open circuit or short
circuit.
Repair or Replace the wiring
harness.