service indicator DODGE DURANGO 2005 2.G User Guide

These indicators are molded into the bottom of the tread
grooves and will appear as bands when the tread depth
becomes 1/16 inch (2 mm). When the indicators appear
in 2 or more adjacent grooves, the tire should be replaced.
Many states have laws requiring tire replacement at this
point.
Replacement Tires
The tires on your new vehicle provide a balance of many
characteristics. They should be inspected regularly for
wear and correct cold tire inflation pressure. The manu-
facturer strongly recommends that you use tires equiva-
lent to the originals in size, quality and performance
when replacement is needed (see the paragraph on tread
wear indicators). Refer to the Tire and Loading Informa-
tion placard for the size designation of your tire. The
service description and load identification will be found
on the original equipment tire. Failure to use equivalent
replacement tires may adversely affect the safety, han-
dling, and ride of your vehicle. We recommend that you
contact your original equipment or an authorized tire
dealer with any questions you may have on tire specifi-
cations or capability.
STARTING AND OPERATING 255
5

ONBOARD DIAGNOSTIC SYSTEM — OBD II
Your vehicle is equipped with a sophisticated onboard
diagnostic system called OBD II. This system monitors
the performance of the emissions, engine, and automatic
transmission control systems. When these systems are
operating properly, your vehicle will provide excellent
performance and fuel economy, as well as engine emis-
sions well within current government regulations.
If any of these systems require service, the OBD II system
will turn on the “Malfunction Indicator Light.” It will
also store diagnostic codes and other information to
assist your service technician in making repairs. Al-
though your vehicle will usually be drivable and not
need towing, see your dealer for service as soon as
possible.CAUTION!
•Prolonged driving with the “Malfunction Indica-
tor Light” on could cause further damage to the
emission control system. It could also affect fuel
economy and driveability. The vehicle must be
serviced before any emissions tests can be per-
formed.
•If the “Malfunction Indicator Light” is flashing
while the engine is running, severe catalytic con-
verter damage and power loss will soon occur.
Immediate service is required.
Loose Fuel Filler Cap Message
After fuel is added, the vehicle diagnostic system can
determine if the fuel filler cap is loose, improperly
installed, or damaged. A loose fuel filler cap message will
be displayed in the instrument cluster. Tighten the gas
MAINTAINING YOUR VEHICLE 307
7

cap until aclickingsound is heard. This is an indication
that the gas cap is properly tightened. Press the odometer
reset button to turn the message off. If the problem
persists, the message will appear the next time the
vehicle is started. This might indicate a damaged cap. If
the problem is detected twice in a row, the system will
turn on the Malfunction Indicator Light (MIL). Resolving
the problem will turn the MIL light off.
EMISSIONS INSPECTION AND MAINTENANCE
PROGRAMS
In some localities, it may be a legal requirement to pass
an inspection of your vehicle’s emissions control system.
Failure to pass could prevent vehicle registration.
For states which have an I/M (Inspection and
Maintenance) requirement, this check verifies the
following: the MIL (Malfunction Indicator Lamp)is functioning and is not on when the engine is running,
and that the OBD (On Board Diagnostic) system is ready
for testing.
Normally, the OBD system will be ready. The OBD
system maynotbe ready if your vehicle was recently
serviced, if you recently had a dead battery, or a battery
replacement. If the OBD system should be determined
not ready for the I/M test, your vehicle may fail the test.
Your vehicle has a simple ignition key actuated test
which you can use prior to going to the test station. To
check if your vehicle’s OBD system is ready, you must do
the following:
1. Insert your ignition key into the ignition switch.
2. Turn the ignition to the ON position, but do not crank
or start the engine.
3. If you crank or start the engine, you will have to start
this test over.
308 MAINTAINING YOUR VEHICLE

WARNING!
Battery posts, terminals, and related accessories con-
tain lead and lead compounds. Always wash hands
after handling the battery.
To determine the battery charge, check the battery test
indicator (if equipped) on top of the battery. Refer to the
illustration.
CAUTION!
It is essential when replacing the cables on the
battery that the positive cable is attached to the
positive post and the negative cable is attached to the
negative post. Battery posts are marked (+) positive
and negative (-) and identified on the battery case.
Also, if a “fast charger” is used while battery is in the
vehicle, disconnect both vehicle battery cables be-
fore connecting the charger to battery. Do not use a
“fast charger” to provide starting voltage.
Air Conditioner Maintenance
For best possible performance, your air conditioner
should be checked and serviced by an Authorized Dealer
at the start of each warm season. This service should
include cleaning of the condenser fins and a performance
test. Drive belt tension should also be checked at this
time.
MAINTAINING YOUR VEHICLE 319
7

Hazard Warning Flasher................. 286
Headlights........................... 123
High Beam........................... 126
High Beam/Low Beam Select............. 126
Instrument Cluster..................123,164
Interior..........................121,136
License............................. 354
Lights On Reminder.................... 124
Low Fuel.........................164,165
Malfunction Indicator................... 170
Park............................... 123
Passing............................. 125
Seat Belt Reminder..................... 165
Service.............................. 348
Turn Signal........................125,350
Warning (Instrument Cluster Description)..... 164
Washer Fluid......................... 170
Loading Vehicle......................... 268
Tires ............................... 244Locks................................. 13
Auto Unlock.......................... 16
Automatic Door........................ 15
Child Protection........................ 17
Door................................ 13
Ignition.............................. 12
Keys................................. 9
Power Door........................... 14
Steering Wheel......................... 12
Lower Anchors and Tether for CHildren (LATCH) . 57
Lubricating Oil......................... 336
Lubrication, Body....................... 321
Lug Nuts............................. 294
Luggage Carrier......................... 155
Lumbar Support........................ 103
Maintenance Free Battery.................. 318
Maintenance Procedures................... 310
Maintenance Schedule.................... 363
402 INDEX

ScheduleA......................... 377
ScheduleB.......................... 366
Malfunction Indicator Light..............170,308
Manual, Service......................... 390
Manual Transmission
Lubricant Selection..................... 360
Map/Reading Lights..................... 136
Memory Seat........................... 114
Mirrors................................ 74
Automatic Dimming...................74,78
Electric Powered....................... 76
Heated.............................. 77
Memory............................. 114
Outside.............................. 75
Rearview............................. 74
Vanity............................... 77
Modifications/Alterations, Vehicle............. 6
Mopar Parts.........................309,389
Multi-Function Control Lever............... 124New Vehicle Break-In Period................ 64
Occupant Classification System............... 42
Occupant Restraints....................... 28
Octane Rating, Gasoline................... 260
Oil, Engine......................... 311,359
Capacity............................ 357
Change Interval....................... 312
Dipstick............................. 311
Disposal............................ 314
Filter............................314,359
Filter Disposal........................ 314
Identification Logo..................... 313
Materials Added to..................... 314
Recommendation...................313,357
Synthetic............................ 314
Viscosity..........................313,357
Onboard Diagnostic System..............307,308
Opener, Garage Door..................... 142
INDEX 403
10

Hitches............................. 275
Minimum Requirements................. 276
Trailer and Tongue Weight................ 274
Wiring.............................. 277
Trailer Towing Guide..................... 275
Trailer Weight.......................... 275
Transaxle............................. 221
Automatic........................... 221
Operation........................... 221
Transfer Case........................... 335
Fluid............................... 360
Transmission........................221,332
Automatic........................221,332
Filter............................... 334
Fluid............................334,360
Maintenance.......................... 332
Transmitter Battery Service.................. 24
Transmitter, Garage Door Opener............ 142
Transmitter Programming................... 22Tread Wear Indicators.................... 254
Trip Computer.......................... 136
Trip Odometer.......................... 168
Trip Odometer Reset Button................ 172
Turn Signals......................125,164,350
Underhood Fuses........................ 345
Universal Transmitter..................... 142
Unlock, Auto........................... 16
Vacuum/Vapor Harnesses................. 329
Vanity Mirrors........................... 77
Variance, Compass....................... 141
Vehicle Identification Number................ 5
Vehicle Loading......................245,268
Vehicle Modifications/Alterations.............. 6
Vehicle Storage......................... 381
Warning Lights (Instrument Cluster Description) . 164
INDEX 409
10