engine coolant DODGE RAM 1999 Service Repair Manual
Page 1162 of 1691
\
\
\
\
\
\
\
Engine Coolant Level, Hoses & Clamps
\
\
\
\
\
\
\
SERVICE
\b\
\
\
\
\
\
\
Lubricate Steering Linkage
\
\
\
\
\
\
\
REPLACE
\b\
\
\
\
\
\
\
Engine Oil
\
\
\
\
\
\
\
Engine Oil Filter (
1)
\
\
\
\
\
\
\
(
1) 8.0L: Change oil filter at every oil change.
5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly,
replace the oil filter at every oil change.
\
\
\
\
\
\
\
LUBRICATION SPECIFICATIONS
\
\b\
\
\
\b\
\
\
Material Condition Specification
\
\
\
\
\
\
\
Engine Oil Ambient Temperature Above 0 F SAE 10W-30
(
1) (-18 C) To Over 100 F (38 C)
\
\
\
\
\
Ambient Temperature Less Than SAE 5W-30
-20 F (-29 C) Up To 32 F (0 C)
\
\
\
\
\
\
\
Engine All 50/50 Mixture Of
Coolant Distilled Water &
Ethylene Glycol
\
\
\
\
\
\
\
Brake Fluid All DOT 3
\
\
\
\
\
\
\
Steering All Mopar Multi-Mileage
Linkage Lubricant
Lubricant
\
\
\
\
\
\
\
(
1) - SAE 10W-30 engine oil is preferred. Use only API approved
oil with Starburst Symbol.
\
\
\
\
\
\
\
FLUID CAPACITIES
\
\b\
\
\
\b\
\
\
Item Condition Specification (1)
\
\
\
\
\
\
\
Engine Oil 5.9L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
8.0L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
5.9L: Drained 4.5 Qts. (4.2L)
\
\
\
\
\
\
\
Engine 5.9L: Drained 20 Qts. (19L)
Coolant
\
\
\
\
\
8.0L: Drained 24 Qts. (22.7L)
\
\
\
\
\
\
\
(
1) - Capacities are recommended or calculated levels. Always use
dipstick (if available) to measure level.
\f
\
\
\
\
\
\
\
105,000 MILE (168,000 KM) SEVERE DUTY SERVICE
105,000 MILE (168,000 KM) SEVERE DUTY SERVICE\
\
\
\
\
\
\
Page 1163 of 1691
VERIFY
\b\
\
\
\
\
\
\
Last Major Service Was Performed.
\
\
\
\
\
\
\
INSPECT
\b\
\
\
\
\
\
\
Exhaust System
\
\
\
\
\
\
\
Brake Hoses
\
\
\
\
\
\
\
Engine Coolant Level, Hoses & Clamps
\
\
\
\
\
\
\
SERVICE
\b\
\
\
\
\
\
\
Rotate Tires
\
\
\
\
\
\
\
Lubricate Steering Linkage
\
\
\
\
\
\
\
REPLACE
\b\
\
\
\
\
\
\
Engine Oil
\
\
\
\
\
\
\
Engine Oil Filter (
1)
\
\
\
\
\
\
\
(
1) 8.0L: Change oil filter at every oil change.
5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly,
replace the oil filter at every oil change.
\
\
\
\
\
\
\
LUBRICATION SPECIFICATIONS
\
\b\
\
\
\b\
\
\
Material Condition Specification
\
\
\
\
\
\
\
Engine Oil Ambient Temperature Above 0 F SAE 10W-30
(
1) (-18 C) To Over 100 F (38 C)
\
\
\
\
\
Ambient Temperature Less Than SAE 5W-30
-20 F (-29 C) Up To 32 F (0 C)
\
\
\
\
\
\
\
Engine All 50/50 Mixture Of
Coolant Distilled Water &
Ethylene Glycol
\
\
\
\
\
\
\
Brake Fluid All DOT 3
\
\
\
\
\
\
\
Steering All Mopar Multi-Mileage
Linkage Lubricant
Lubricant
\
\
\
\
\
\
\
(
1) - SAE 10W-30 engine oil is preferred. Use only API approved
oil with Starburst Symbol.
\
\
\
\
\
\
\
FLUID CAPACITIES
\
\b\
\
\
\b\
\
\
Item Condition Specification (1)
\
\
\
\
\
\
\
Engine Oil 5.9L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
8.0L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
5.9L: Drained 4.5 Qts. (4.2L)
\
\
\
\
\
\
\
Engine 5.9L: Drained 20 Qts. (19L)
Coolant
\
\
\
\
\
Page 1164 of 1691
8.0L: Drained 24 Qts. (22.7L)
\
\
\
\
\
\
\
(
1) - Capacities are recommended or calculated levels. Always use
dipstick (if available) to measure level.
\f
\
\
\
\
\
\
\
108,000 MILE (173,000 KM) SEVERE DUTY SERVICE
108,000 MILE (173,000 KM) SEVERE DUTY SERVICE\
\
\
\
\
\
\
VERIFY
\b\
\
\
\
\
\
\
Last Major Service Was Performed.
\
\
\
\
\
\
\
INSPECT
\b\
\
\
\
\
\
\
Exhaust System
\
\
\
\
\
\
\
Brake Hoses
\
\
\
\
\
\
\
Engine Air Cleaner & Air Pump Filters
\
\
\
\
\
\
\
Brake Linings
\
\
\
\
\
\
\
SERVICE
\b\
\
\
\
\
\
\
Lubricate Steering Linkage
\
\
\
\
\
\
\
Automatic Transmission Bands
\
\
\
\
\
\
\
REPLACE
\b\
\
\
\
\
\
\
Engine Oil
\
\
\
\
\
\
\
Engine Oil Filter
\
\
\
\
\
\
\
Automatic Transmission Fluid & Filter
\
\
\
\
\
\
\
Transfer Case Fluid
\
\
\
\
\
\
\
Rear Axle Fluid
\
\
\
\
\
\
\
Front Axle Fluid (4x4)
\
\
\
\
\
\
\
Engine Coolant
\
\
\
\
\
\
\
(
1) 8.0L: Change oil filter at every oil change.
5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly,
replace the oil filter at every oil change.
\
\
\
\
\
\
\
LUBRICATION SPECIFICATIONS
\
\b\
\
\
\b\
\
\
Material Condition Specification
\
\
\
\
\
\
\
Engine Oil Ambient Temperature Above 0 F SAE 10W-30
(
1) (-18 C) To Over 100 F (38 C)
\
\
\
\
\
Ambient Temperature Less Than SAE 5W-30
-20 F (-29 C) Up To 32 F (0 C)
\
\
\
\
\
\
\
Engine All 50/50 Mixture Of
Coolant Distilled Water &
Page 1165 of 1691
Ethylene Glycol
\
\
\
\
\
\
\
Brake Fluid All DOT 3
\
\
\
\
\
\
\
Steering All Mopar Multi-Mileage
Linkage Lubricant
Lubricant
\
\
\
\
\
\
\
Automatic All ATF+2 Type 7176
Transmission
Fluid
\
\
\
\
\
\
\
Transfer Case All ATF+2 Type 7176
Fluid Or DEXRON III ATF
\
\
\
\
\
\
\
Rear Axle All Mopar Hypoid Lubricant
Lubricant SAE 80W-90
(
2) GL-5 Gear Lube
\
\
\
\
\
\
\
4x4 Front All Mopar Hypoid Lubricant
Axle SAE 80W-90
Lubricant GL-5 Gear Lube
\
\
\
\
\
\
\
(
1) - SAE 10W-30 engine oil is preferred. Use only API approved
oil with Starburst Symbol.
(
2) - Axles with Limited-Slip Differentials require the use of
a 5% Friction Modifier, such as Mopar Gear Oil Additive
Friction Modifier.
\
\
\
\
\
\
\
FLUID CAPACITIES
\
\b\
\
\
\b\
\
\
Item Condition Specification (1)
\
\
\
\
\
\
\
Engine Oil 5.9L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
8.0L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
5.9L: Drained 4.5 Qts. (4.2L)
\
\
\
\
\
\
\
Engine 5.9L: Drained 20 Qts. (19L)
Coolant
\
\
\
\
\
8.0L: Drained 24 Qts. (22.7L)
\
\
\
\
\
\
\
Automatic 47RE: Dry Fill 1733 Pts. (815.6L)
Transmission
Fluid
\
\
\
\
\
\
\
Rear Axle 9-1/4: Drained 4.8 Pts. (2.3L)
Fluid
\
\
\
\
\
Model 248 (2WD) 6.3 Pts. (3L)
\
\
\
\
\
Model 248 (4WD) 7.3 Pts. (3.4L)
\
\
\
\
\
Model 267 (2WD) 7 Pts. (3.3L)
\
\
\
\
\
Model 267 (4WD) 7.8 Pts. (3.6L)
\
\
\
\
\
Model 286 (2WD) 6.8.Pts. (3.2L)
\
\
\
\
\
Model 286 (4WD) 10.1 Pts. (4.8L)
\
\
\
\
\
\
\
Rear Axle Model 248 (2WD) 6.3 Pts. (3L)
Limited Slip
\
\
\
\
\
Page 1166 of 1691
Differential Model 248 (4WD) 7.3 Pts. (3.4L)
\
\
\
\
\
Model 267 (2WD) 7 Pts. (3.3L)
\
\
\
\
\
Model 267 (4WD) 7.8 Pts. (3.6L)
\
\
\
\
\
Model 286 (2WD) 6.8 Pts. (3.2L)
\
\
\
\
\
Model 286 (4WD) 10.1 Pts. (4.8L)
\
\
\
\
\
\
\
Front Axle Model 216 6.8 Pts. (3.6L)
Lubricant
\
\
\
\
\
Model 248 7.6 Pts. (3.6L)
\
\
\
\
\
\
\
Transfer Case NV241 5 Pts. (2.7L)
Fluid
\
\
\
\
\
NV241 HD 6.5 Pts. (3.5L)
\
\
\
\
\
NV241 HD W/PTO 9 Pts. (4.9L)
\
\
\
\
\
\
\
(
1) - Capacities are recommended or calculated levels. Always use
dipstick (if available) to measure level.
\f
\
\
\
\
\
\
\
111,000 MILE (185,000 KM) SEVERE DUTY SERVICE
111,000 MILE (185,000 KM) SEVERE DUTY SERVICE\
\
\
\
\
\
\
VERIFY
\b\
\
\
\
\
\
\
Last Major Service Was Performed.
\
\
\
\
\
\
\
INSPECT
\b\
\
\
\
\
\
\
Exhaust System
\
\
\
\
\
\
\
Brake Hoses
\
\
\
\
\
\
\
Engine Coolant Level, Hoses & Clamps
\
\
\
\
\
\
\
SERVICE
\b\
\
\
\
\
\
\
Rotate Tires
\
\
\
\
\
\
\
Lubricate Steering Linkage
\
\
\
\
\
\
\
REPLACE
\b\
\
\
\
\
\
\
Engine Oil
\
\
\
\
\
\
\
Engine Oil Filter (
1)
\
\
\
\
\
\
\
(
1) 8.0L: Change oil filter at every oil change.
5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly,
replace the oil filter at every oil change.
\
\
\
\
\
\
\
LUBRICATION SPECIFICATIONS
\
\b\
\
\
\b\
\
\
Material Condition Specification
\
\
\
\
\
\
\
Engine Oil Ambient Temperature Above 0 F SAE 10W-30
(
1) (-18 C) To Over 100 F (38 C)
Page 1167 of 1691
\
\
\
\
\
Ambient Temperature Less Than SAE 5W-30
-20 F (-29 C) Up To 32 F (0 C)
\
\
\
\
\
\
\
Engine All 50/50 Mixture Of
Coolant Distilled Water &
Ethylene Glycol
\
\
\
\
\
\
\
Brake Fluid All DOT 3
\
\
\
\
\
\
\
Steering All Mopar Multi-Mileage
Linkage Lubricant
Lubricant
\
\
\
\
\
\
\
(
1) - SAE 10W-30 engine oil is preferred. Use only API approved
oil with Starburst Symbol.
\
\
\
\
\
\
\
FLUID CAPACITIES
\
\b\
\
\
\b\
\
\
Item Condition Specification (1)
\
\
\
\
\
\
\
Engine Oil 5.9L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
8.0L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
5.9L: Drained 4.5 Qts. (4.2L)
\
\
\
\
\
\
\
Engine 5.9L: Drained 20 Qts. (19L)
Coolant
\
\
\
\
\
8.0L: Drained 24 Qts. (22.7L)
\
\
\
\
\
\
\
(
1) - Capacities are recommended or calculated levels. Always use
dipstick (if available) to measure level.
\f
\
\
\
\
\
\
\
114,000 MILE (190,000 KM) SEVERE DUTY SERVICE
114,000 MILE (190,000 KM) SEVERE DUTY SERVICE\
\
\
\
\
\
\
VERIFY
\b\
\
\
\
\
\
\
Last Major Service Was Performed.
\
\
\
\
\
\
\
INSPECT
\b\
\
\
\
\
\
\
Exhaust System
\
\
\
\
\
\
\
Brake Hoses
\
\
\
\
\
\
\
Engine Coolant Level, Hoses & Clamps
\
\
\
\
\
\
\
SERVICE
\b\
\
\
\
\
\
\
Lubricate Steering Linkage
\
\
\
\
\
\
\
REPLACE
\b\
\
\
\
\
\
\
Engine Oil
\
\
\
\
\
\
\
Engine Oil Filter (
1)
\
\
\
\
\
\
\
(
1) 8.0L: Change oil filter at every oil change.
Page 1168 of 1691
5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly,
replace the oil filter at every oil change.
\
\
\
\
\
\
\
LUBRICATION SPECIFICATIONS
\
\b\
\
\
\b\
\
\
Material Condition Specification
\
\
\
\
\
\
\
Engine Oil Ambient Temperature Above 0 F SAE 10W-30
(
1) (-18 C) To Over 100 F (38 C)
\
\
\
\
\
Ambient Temperature Less Than SAE 5W-30
-20 F (-29 C) Up To 32 F (0 C)
\
\
\
\
\
\
\
Engine All 50/50 Mixture Of
Coolant Distilled Water &
Ethylene Glycol
\
\
\
\
\
\
\
Brake Fluid All DOT 3
\
\
\
\
\
\
\
Steering All Mopar Multi-Mileage
Linkage Lubricant
Lubricant
\
\
\
\
\
\
\
(
1) - SAE 10W-30 engine oil is preferred. Use only API approved
oil with Starburst Symbol.
\
\
\
\
\
\
\
FLUID CAPACITIES
\
\b\
\
\
\b\
\
\
Item Condition Specification (1)
\
\
\
\
\
\
\
Engine Oil 5.9L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
8.0L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
5.9L: Drained 4.5 Qts. (4.2L)
\
\
\
\
\
\
\
Engine 5.9L: Drained 20 Qts. (19L)
Coolant
\
\
\
\
\
8.0L: Drained 24 Qts. (22.7L)
\
\
\
\
\
\
\
(
1) - Capacities are recommended or calculated levels. Always use
dipstick (if available) to measure level.
\f
\
\
\
\
\
\
\
117,000 MILE (185,000 KM) SEVERE DUTY SERVICE
117,000 MILE (185,000 KM) SEVERE DUTY SERVICE\
\
\
\
\
\
\
VERIFY
\b\
\
\
\
\
\
\
Last Major Service Was Performed.
\
\
\
\
\
\
\
INSPECT
\b\
\
\
\
\
\
\
Exhaust System
\
\
\
\
\
\
\
Brake Hoses
\
\
\
\
\
\
\
Engine Coolant Level, Hoses & Clamps
\
\
\
\
\
\
\
SERVICE
\b\
\
\
\
\
\
\
Page 1169 of 1691
Rotate Tires
\
\
\
\
\
\
\
Lubricate Steering Linkage
\
\
\
\
\
\
\
REPLACE
\b\
\
\
\
\
\
\
Engine Oil
\
\
\
\
\
\
\
Engine Oil Filter (
1)
\
\
\
\
\
\
\
(
1) 8.0L: Change oil filter at every oil change.
5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly,
replace the oil filter at every oil change.
\
\
\
\
\
\
\
LUBRICATION SPECIFICATIONS
\
\b\
\
\
\b\
\
\
Material Condition Specification
\
\
\
\
\
\
\
Engine Oil Ambient Temperature Above 0 F SAE 10W-30
(
1) (-18 C) To Over 100 F (38 C)
\
\
\
\
\
Ambient Temperature Less Than SAE 5W-30
-20 F (-29 C) Up To 32 F (0 C)
\
\
\
\
\
\
\
Engine All 50/50 Mixture Of
Coolant Distilled Water &
Ethylene Glycol
\
\
\
\
\
\
\
Brake Fluid All DOT 3
\
\
\
\
\
\
\
Steering All Mopar Multi-Mileage
Linkage Lubricant
Lubricant
\
\
\
\
\
\
\
(
1) - SAE 10W-30 engine oil is preferred. Use only API approved
oil with Starburst Symbol.
\
\
\
\
\
\
\
FLUID CAPACITIES
\
\b\
\
\
\b\
\
\
Item Condition Specification (1)
\
\
\
\
\
\
\
Engine Oil 5.9L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
8.0L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
5.9L: Drained 4.5 Qts. (4.2L)
\
\
\
\
\
\
\
Engine 5.9L: Drained 20 Qts. (19L)
Coolant
\
\
\
\
\
8.0L: Drained 24 Qts. (22.7L)
\
\
\
\
\
\
\
(
1) - Capacities are recommended or calculated levels. Always use
dipstick (if available) to measure level.
\f
\
\
\
\
\
\
\
120,000 MILE (199,000 KM) SEVERE DUTY SERVICE
120,000 MILE (199,000 KM) SEVERE DUTY SERVICE\
\
\
\
\
\
\
VERIFY
\b\
\
\
\
\
\
\
Last Major Service Was Performed.
Page 1170 of 1691
SC HED ULE D S ER VIC ES
INSPECT
Exhaust System
Brake Hoses
Engine Coolant Level, Hoses & Clamps
Engine Air Cleaner & Air Pump Filters
Brake Linings
SERVICE
Lubricate Steering Linkage
Automatic Transmission Bands
Clean EGR Passages (5.9L)
REPLACE
Engine Oil
Engine Oil Filter (
1)
Automatic Transmission Fluid & Filter
Rear Axle Fluid
Front Axle Fluid (4x4)
Spark Plugs
Ignition Cables
PCV Valve (5.9L)
EGR Valve (5.9L)
Distributor Cap & Rotor (5.9L)
(
1) 8.0L: Change oil filter at every oil change.
5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly,
replace the oil filter at every oil change.
LUBRICATION SPECIFICATIONS
Material Condition Specification
Engine Oil Ambient Temperature Above 0 F SAE 10W-30
(
1) (-18 C) To Over 100 F (38 C)
Ambient Temperature Less Than SAE 5W-30
-20 F (-29 C) Up To 32 F (0 C)
Engine All 50/50 Mixture Of
Coolant Distilled Water &
Ethylene Glycol
Brake Fluid All DOT 3
Page 1171 of 1691
SC HED ULE D S ER VIC ES
Steering All Mopar Multi-Mileage
Linkage Lubricant
Lubricant
Automatic All ATF+2 Type 7176
Transmission
Fluid
Rear Axle All Mopar Hypoid Lubricant
Lubricant SAE 80W-90
(
2) GL-5 Gear Lube
4x4 Front All Mopar Hypoid Lubricant
Axle SAE 80W-90
Lubricant GL-5 Gear Lube
(
1) - SAE 10W-30 engine oil is preferred. Use only API approved
oil with Starburst Symbol.
(
2) - Axles with Limited-Slip Differentials require the use of
a 5% Friction Modifier, such as Mopar Gear Oil Additive
Friction Modifier.
FLUID CAPACITIES
Item Condition Specification (1)
Engine Oil 5.9L: Drained, W/New Filter 5 Qts. (4.7L)
8.0L: Drained, W/New Filter 5 Qts. (4.7L)
5.9L: Drained 4.5 Qts. (4.2L)
Engine 5.9L: Drained 20 Qts. (19L)
Coolant
8.0L: Drained 24 Qts. (22.7L)
Automatic 47RE: Dry Fill 1733 Pts. (815.6L)
Transmission
Fluid
Rear Axle 9-1/4: Drained 4.8 Pts. (2.3L)
Fluid
Model 248 (2WD) 6.3 Pts. (3L)
Model 248 (4WD) 7.3 Pts. (3.4L)
Model 267 (2WD) 7 Pts. (3.3L)
Model 267 (4WD) 7.8 Pts. (3.6L)
Model 286 (2WD) 6.8.Pts. (3.2L)
Model 286 (4WD) 10.1 Pts. (4.8L)
Rear Axle Model 248 (2WD) 6.3 Pts. (3L)
Limited Slip
Differential Model 248 (4WD) 7.3 Pts. (3.4L)
Model 267 (2WD) 7 Pts. (3.3L)
Model 267 (4WD) 7.8 Pts. (3.6L)
Model 286 (2WD) 6.8 Pts. (3.2L)