ESP FIAT 500 ABARTH 2012 2.G Blue And Me User Guide

•Conduct the conversation using the hands-free com-
munication system.
•To end the phone call, press thePHONE HANG UP
button on the steering wheel, or end the phone call
from your mobile phone keypad.
Calling a phone number using call history (recent
calls)
RECENT CALLSoption is a list of the recent calls made
or received. It can consist of up to ten incoming calls, up
to ten outgoing calls and up to five missed calls.
To dial a phone number using manual interaction, pro-
ceed as follows:
•Press the/MAINbutton on the steering wheel to
open the Main Menu.
•SelectRECENT CALLSand then press thePRESET
UP/OKbutton on the rear of the steering wheel.
•The system will present a list of phone numbers. Use
the Scan up/Scan down buttons to select the required
phone number. Then press thePRESET UP/OKbutton
on the rear of the steering wheel or the
/MAIN
button on the steering wheel to start the call.
•To end the phone call, press thePHONE HANG UP
button on the steering wheel.
Or, using voice interaction:
To call back the last incoming phone number, press the
steering wheel button and say“Call back”.
The system will display information about the last caller
and ask if you would like to call back this contact. To
respond with “yes”, say“Yes”,otherwise say“No”.
1
BLUE&ME™ User’s Manual 37

To redial the last phone number you called, say“Redial”.
The system will display information about the last con-
tact you called and will ask if you would like to redial
this phone number. To redial the last phone number
called, say“Yes”, otherwise say“No”.
NOTE:If there are no incoming calls stored on the
RECENT CALLSlist,BLUE&ME™will say “No re-
ceived calls” and the display will read “No call found”.
Incoming Calls
With the hands-free communication system you can
respond to incoming phone calls using the steering wheel
buttons. When a phone call is received, the system will
display information about the caller ’s identity, if avail-
able.
The incoming phone call can have a customized ring tone
(if this function is available on your mobile phone).
Answering a phone call
•
To answer the phone call, press the/MAINbutton
on the steering wheel.
•To end the phone call, press thePHONE HANG UP
button on the steering wheel.
Rejecting a phone call
•
To reject the phone call, press thePHONE HANG UP
button on the steering wheel.
Ignoring a phone call
•
To ignore the phone call and mute the phone call ring
tone, press the
/ESCbutton. Press the/ESC
again to hear the call or ring tone again.
38 BLUE&ME™ User’s Manual

TROUBLESHOOTING
Hands-Free Communication Package
General - display screen
Problem Probable Cause Possible Solution
Display screen shows:
NO PHONEBOOK
And the system saysTo
copy the phone book to
the system, go to the Set-
tings Menu, and select
USER DATA. To dial a
number, say Dial.For “pull” phones
•When the system asked “The data from
the phonebook will now be copied onto
the system. Continue?”, you responded
with “No”
•You have not downloaded your phone-
book via the SETTINGS menu
•The downloaded phonebook was de-
leted
For “push” phones
•You have not sent contacts to the sys-
tem using the ADD CONTACTS proce-
dure
•The downloaded phonebook was de-
letedFor “pull” phones
•Use the option PHONEBOOK in the
SETTINGS menu to download the
phonebook again
•Enter contact information in the phone-
book on your mobile phone and then
download the phonebook again – see
the section SETTING FUNCTIONS -
MANAGING USER DATA AND
PHONEBOOK For “push” phones
•Use the option ADD CONTACTS in the
SETTINGS menu to send contacts in
the phonebook on your mobile phone
to the system – see the section SET-
TING FUNCTIONS - MANAGING
USER DATA AND PHONEBOOK
1
BLUE&ME™ User’s Manual 83

Problem Probable Cause Possible Solution
•If you don’t press the
button be-
fore pronouncing a voice command, the
system will not activate voice recogni-
tion and therefore will not recognize
your voice commands
•If you don’t press the
/MAINbut-
ton to enter the Main Menu, it will not
be possible to manually access the
BLUE&ME™menu
•If after pressing the
/MAINbutton,
you don’t take action within approxi-
mately eight seconds, the system will
not respond to your key press
The mobile phone
prompts you to enter a
PIN number, but no
phone pairing proce-
dure was running•After you delete the pairing-related user
information on your mobile phone or
on the system, theBluetoothpairing
relationship between your mobile phone
andBLUE&ME™will no longer work•
Select option DELETE USERS on the system
and delete all users; then, pair the phone
again – see the section SETTING FUNCTIONS
- MANAGING USER DATA AND PHONE-
BOOK and also the section SETTING FUNC-
TIONS - PAIRING YOUR MOBILE PHONE
88 BLUE&ME™ User’s Manual

•If FIAT Auto S.p.A. provides or makes available to
you Supplemental Components and no other EULA
terms are provided along with the Supplemental
Components, then the terms of this EULA shall
apply.
•If FIAT Auto S.p.A.’s Software Suppliers, their affili-
ates and/or their designated agent make available
Supplemental Components, and no other EULA
terms are provided, then the terms of this EULA
shall apply, except that the FIAT Auto S.p.A.’s
Software Suppliers or affiliate entity providing the
Supplemental Component(s) shall be the licensor of
the Supplemental Component(s).
•FIAT Auto S.p.A., FIAT Auto S.p.A.’s Software
Suppliers, their affiliates and/or their designated
agent reserve the right to discontinue any Internet-
based services provided to you or made available to
you through the use of the SOFTWARE.
•Links to Third Party Sites. The SOFTWARE may
provide you with the ability to link to third party
sites through the use of the SOFTWARE. The third
party sites are not under the control of FIAT Auto
S.p.A.’s Software Suppliers, their affiliates and/or
their designated agent. Neither FIAT Auto S.p.A.’s
Software Suppliers nor their affiliates nor their
designated agent are responsible for (i) the contents
of any third party sites, any links contained in third
party sites, or any changes or updates to third party
sites, or (ii) webcasting or any other form of trans-
mission received from any third party sites. If the
SOFTWARE provides links to third party sites, those
links are provided to you only as a convenience, and
the inclusion of any link does not imply an endorse-
ment of the third party site by FIAT Auto S.p.A.’s
Software Suppliers, their affiliates and/or their des-
ignated agent.
1
BLUE&ME™ User’s Manual 105

UPGRADES AND RECOVERY MEDIA

If the SOFTWARE is provided by FIAT Auto S.p.A.
separate from the DEVICE on media such as a ROM
chip, CD ROM disk(s) or via web download or other
means, and is labeled “For Upgrade Purposes Only”
you may install one (1) copy of such SOFTWARE onto
the DEVICE as a replacement copy for the existing
SOFTWARE, and use it in accordance with this EULA,
including any additional EULA terms accompanying
the upgrade SOFTWARE.
INTELLECTUAL PROPERTY RIGHTS
All title and intellectual property rights in and to the
SOFTWARE (including but not limited to any images,
photographs, animations, video, audio, music, text and
“applets,” incorporated into the SOFTWARE), the accom-
panying printed materials, and any copies of the SOFT-
WARE, are owned by FIAT Auto S.p.A.’s Software Sup-
pliers, their affiliates or suppliers. The SOFTWARE islicensed, not sold. You may not copy the printed materi-
als accompanying the SOFTWARE. All title and intellec-
tual property rights in and to the content which may be
accessed through use of the SOFTWARE is the property
of the respective content owner and may be protected by
applicable copyright or other intellectual property laws
and treaties. This EULA grants you no rights to use such
content. All rights not specifically granted under this
EULA are reserved by FIAT Auto S.p.A.’s Software
Suppliers, their affiliates and suppliers. Use of any on-
line services which may be accessed through the SOFT-
WARE may be governed by the respective terms of use
relating to such services. If this SOFTWARE contains
documentation that is provided only in electronic form,
you may print one copy of such electronic
documentation.
EXPORT RESTRICTIONS
You acknowledge that the SOFTWARE is subject to U.S.
and European Union export jurisdiction. You agree to
106 BLUE&ME™ User’s Manual

872214.ps 12FF500-126-AA Fiat 1" gutter 10/04/2010 11:37:45
VEHICLES SOLD IN CANADA
With respect to any Vehicles Sold in Canada, the name
Chrysler Group LLC shall be deemed to be deleted and
the name Chrysler Canada Inc. used in substitution
therefore.
DRIVING AND ALCOHOL
Drunken driving is one of the most frequent causes of
accidents.
Your driving ability can be seriously impaired with blood
alcohol levels far below the legal minimum. If you are
drinking, don’t drive. Ride with a designated non-drinking
driver, call a cab, a friend, or use public transportation.
WARNING!
Driving after drinking can lead to an accident. Your
perceptions are less sharp, your reflexes are slower,
and your judgment is impaired when you have been
drinking. Never drink and then drive.
This manual illustrates and describes the operation of
features and equipment that are either standard or op-
tional on this vehicle. This manual may also include a
description of features and equipment that are no longer
available or were not ordered on this vehicle. Please
disregard any features and equipment described in this
manual that are not on this vehicle.
Chrysler Group LLC reserves the right to make changes
in design and specifications, and/or make additions to or
improvements to its products without imposing any
obligation upon itself to install them on products previ-
ously manufactured.
Copyright © 2011 Chrysler Group LLC
VEHICLES SOLD IN CANADA
With respect to any Vehicles Sold in Canada, the name
Chrysler Group LLC shall be deemed to be deleted and
the name Chrysler Canada Inc. used in substitution
therefore.
DRIVING AND ALCOHOL
Drunken driving is one of the most frequent causes of
accidents.
Your driving ability can be seriously impaired with blood
alcohol levels far below the legal minimum. If you are
drinking, don’t drive. Ride with a designated non-drinking
driver, call a cab, a friend, or use public transportation.
WARNING!
Driving after drinking can lead to an accident. Your
perceptions are less sharp, your reflexes are slower,
and your judgment is impaired when you have been
drinking. Never drink and then drive.
This manual illustrates and describes the operation of
features and equipment that are either standard or op-
tional on this vehicle. This manual may also include a
description of features and equipment that are no longer
available or were not ordered on this vehicle. Please
disregard any features and equipment described in this
manual that are not on this vehicle.
Chrysler Group LLC reserves the right to make changes
in design and specifications, and/or make additions to or
improvements to its products without imposing any
obligation upon itself to install them on products previ-
ously manufactured.
Copyright © 2011 Chrysler Group LLC
INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.
INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.