Search FIAT BRAVO 2007 2.G Radio CD MP3 Manual

10
FUNCTIONS AND
ADJUSTMENTS
RADIO
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
QUICK
GUIDE
❒Manual storage of 42 stations: 24 in the
FM band (6 in FM1, 6 in FM2, 6 in FMT
and 6 in FMAST), 6 in the MW band, 6
in the LW band and 6 in the AM band
(MW+LW) that can be stored with Au-
toSTore in the AMAST band
❒Automatic storage (AutoSTore func-
tion) of 6 stations in the FM band and 6
in the AM band
❒SENS DX/LO function (sensitivity ad-
justing in searching radio stations)
❒Scan function (scanning stored stations),
about 10 seconds per station
❒Automatic Stereo/Mono switching.Compact Disc section
❒Disc select (disc no.)
❒Track select (forward/backward)
❒Fast forward/backward
❒Track Repeat function (repetition of the
last track)
❒Track Scan function (scanning the
tracks on the Compact Disc, about 10
seconds per track)
❒RaNDom function (random track play-
ing).
❒TPM function (CD playing sequence
storage)
❒CD Naming function (allocating a name
to a CD), for CD Changer only. Not
available on sound system with MP3
CD player.
❒CD Compression function (volume re-
duction according to input signal level
from CD) GENERAL INFORMATION
The sound system features the following
functions:
Radio section
❒PLL tuning with FM/AM/MW/LW fre-
quency bands
❒RDS (Radio Data System) with TA
(traffic announcements) - PTY (Pro-
gram Type) - EON (Enhanced Other
Network) - REG (Regional pro-
grammes)
❒AF: alternative frequency search selec-
tion in RDS mode
❒Automatic/manual station tuning

15
QUICK
GUIDE
FUNCTIONS AND
ADJUSTMENTS
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
RADIO
The AM band is divided into sections:
MW, LW and AMAST. The AMAST band
is reserved to the stations stored auto-
matically with the AutoSTore function.
The radio is always preset for receiving
stations broadcasting with RDS (Radio Da-
ta System).
PRESETTING BUTTONS
The buttons with symbols from 1 to 6
make it possible to set the following pre-
settings:
– 24 in the FM band ( 6 in FM 1, 6 in FM
2, 6 in FM 3, 6 in FMAST)
– 6 in the LW band
– 6 in the MW band
– 6 in the AMAST band
To call a preset station, choose the re-
quired frequency band and then press
briefly the corresponding preset button
(from 1 to 6). The display will show the
station name and frequency and also the
presetting number.STORING THE LAST
STATION HEARD
The radio automatically keeps in storage
the last station heard for each reception
band, which is then tuned when the ra-
dio is turned on or the reception band is
changed.
AUTOMATIC TUNING
Briefly press button Èor Íto start au-
tomatically searching the tuning for the
next station that it is possible to receive
in the direction chosen.
If the station on which the tuner stops is
one of the stations stored with the pre-
setting buttons (from 1 to 6), the display
will show the presetting number. When the sound system is turned on, the
last function selected before turning off
is played (Radio, Compact Disc or CD
Changer).
To select the Radio source while listening
to another audio source, press briefly and
repeatedly button SRC.
When the Radio source is selected, press
briefly and repeatedly button BAND
ASto
select the required reception band.
Each time the BAND
ASbutton is pressed
the bands: “FM1”, FM2”, “FM3”, “FMAST”,
“LW”, “MW” and “AMAST” are select-
ed in sequence
The FM band is divided into sections: FM1,
FM2, FM3 and FMAST. The FMAST band
is reserved to the stations stored auto-
matically with the AutoSTore function.
The “FMAST” reception band is reserved
to the stations stored automatically with
the AutoSTore function.
R R
A A
D D
I I
O O

QUICK
GUIDE
16
FUNCTIONS AND
ADJUSTMENTS
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
RADIO
SCAN FUNCTION
(station scanning)
Press button SCAN to start scanning the
stations in the frequency band selected
(FM, AM, MW, LW). Each station found
will be heard for a few seconds and the
relevant frequency is shown on the dis-
play.
During scanning, the display will show the
message “TUNER SCAN”, with the word
“SCAN” flashing.
When the SCAN function is on, all the
other functions are cancelled.
The SCAN function is interrupted in the
following cases:
– pressing again button SCAN
– turning the sound system off
– changing the sound source (Radio, CD
Changer)
– changing the selected frequency band (or
the storage block)
– pressing one presetting button
– turning the AutoSTore function on (au-
tomatic storage)SCANNING PRESET STATIONS
Keep button SCAN pressed for at least
2 seconds to start scanning the preset sta-
tions in the current frequency band;
– FM: FM 1, FM 2, …., FM II 1, FM II 2,…
FM III 1, FM III 2,… FMAST 1,
FMAST 2,….
– AM: MW 1, MW 2, …. MW 6, LW 1,
LW 2, …. LW 6, AMAST 1,
AMAST 2,…
Each preset station will be heard for a few
seconds and its frequency shown on the
display.
The Scan function is interrupted in the fol-
lowing cases:
– pressing again button SCAN
– turning the sound system off
– pressing one presetting button
– turning the AutoSTore function on (au-
tomatic storage)
– changing the sound source (Radio, CD
Changer)
– changing the selected frequency band or
the FM level MANUAL TUNING
This allows manual station searching in the
chosen band. To turn this function on use
the MENU (see paragraph “Manual station
tuning on/off (TUNING SEEK) in section
“Radio”).
For manual tuning proceed as follows:
– Select the band using the button BAND
AS: FM1, FM2, FM3, MW or LW.
– Press briefly and repeatedly button Èor
Í.
Keeping one of the buttons Èor Í
pressed obtains fast forward seeking,
which is stopped when the button is re-
leased.

17
QUICK
GUIDE
FUNCTIONS AND
ADJUSTMENTS
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
RADIO
MANUAL STATION STORAGE
Use buttons from 1 to 6 to store the sta-
tion being heard in the selected band.
Keep pressed one of these buttons (1 to
6), when station storing is completed the
display will show the corresponding but-
ton number and a confirmation beep will
be given.AUTOSTORE FUNCTION
(automatic station storage)
To switch on the AutoSTore function (au-
tomatic station storage), keep button
BAND
AS. With this function the radio au-
tomatically stores the stations with the
strongest signal in decreasing order of in-
tensity in the FMAST frequency band (if
tuned on FM band) or AMAST (if tuned on
AM band).
IMPORTANT Activating the AutoSTore
function cancels the stations stored pre-
viously in the FMAST or AMAST band.
During automatic storage the display
shows “TUNER FMAST” or “TUNER
AMAST” if TUNER mode (Radio) with FM
or AM frequency band is selected. To in-
terrupt the automatic station storage,
press button BAND
ASagain: the radio will
automatically tune to the station heard be-
fore activation of the AutoSTore function.LISTENING TO STORED
STATIONS
Proceed as follows:
– select the required frequency band and
the storage block (FM1, FM2, FM3,
FMAST, MW, LW, AMAST);
– briefly press one of the six station stor-
age buttons.
The display will show the station name (if
present) and frequency, whereas at the
bottom of the display is shown “Pn”
where n is the number corresponding to
the current station.
In bands FM1, FM2 and FM3, if reception
is poor or weak and the AF alternative fre-
quency search function is active, the sta-
tion with the strongest signal that is broad-
casting the same programme will be
sought automatically.

QUICK
GUIDE
18
FUNCTIONS AND
ADJUSTMENTS
COMPACT
DISC PLAYER
MP3 CD
PLAYER
CD
CHANGER
INTRODUCTION
RADIO
When the signal of the RDS station tuned
weakens, the following two cases may oc-
cur:
– With “AF SWITCHING: ON” the RDS
system activates automatic tuning of the
optimum frequency of the station chosen,
with the stations enabled, therefore the
radio is automatically tuned to the station
with the strongest signal that is broad-
casting the same programme. During the
journey it will thus be possible to contin-
ue listening to the station chosen with-
out having to change the frequency when
changing area. Of course, the station be-
ing listened to must be receivable in the
area the car is crossing.
– With “AF SWITCHING: OFF” the ra-
dio will not tune the strongest station au-
tomatically and it will have to be found
manually using the tuner buttons. AF FUNCTION
(alternative frequency search)
To turn the AF function on/off, press
briefly button AF
PTY. RDS name (if avail-
able) will stay on the display and if the
function is on the wording is shown.
– “AF SWITCHING: ON” = alternative
frequency search on
– “AF SWITCHING: OFF” = alternative
frequency search off.TA FUNCTION
(traffic information)
Certain stations in the FM band (in stor-
age blocks FM1, FM2, FM3 and FMAST)
are enabled to also broadcast information
about traffic conditions. During a traffic
bulletin, the message “TRAFFIC INFO”
will be displayed alternate with the cur-
rent one (e.g.: station name).
To turn the TA function on/off, press
briefly button TA. When the TA function
is on the display will show the message
“TA-ON”.
When the TA function is on, an incoming
traffic bulletin will stop temporarily the
current broadcasted programme or the
CD being played. Switching from the se-
lected station to the station broadcasting
traffic announcements is only possible if
connection for EON function is enabled.