set clock FORD F150 2005 11.G Quick Reference Guide

PREMIUM/AUDIOPHILE INDASH CD6/MP3
DISC AUDIO SYSTEM(If equipped)
12
3
4
5 8 910 11
6
7
6
EJECTING CDs(CD Eject)
Press to eject a CD. For Indash CD6/MP3
system (if equipped), press and hold to autoejectall CDs present in the system.
TUNERPress to manually move up or down the radio
frequency or to select a desired disc. Also use inmenu mode to select various settings.
MUTE MODEPress to mute the playing media. Press again
to return to the playing media.
MENUPress to toggle through the following modes:Treble, Bass, Balance, Fade, Speed Sensitive
Volume, Compression, Autoset, Setting the Clock.
SHUFFLEPress to play tracks on the current CD in
random order. Press to turn on/off
SEEK FUNCTIONIn radio mode, press to move to the next
strong station up or down the frequency band.In CD mode, press to move to the next/previoustrack on the current disc.
SCAN FUNCTIONIn radio mode, press to hear a brief sampling
of stations. In CD mode, press to hear a briefsampling of CD tracks on the current CD.
SETTING MEMORY PRESETSSelect frequency band with the AM/FM
button, then select a station. Press and hold anumbered button until the sound returns.
VOLUME/POWER CONTROL Push to turn the audio system on or off.
Turn the control to raise or lower volume.
AM/FM AND CD SELECTIn radio mode, press AM/FM to select AM
or FM frequency bands. Press CD to begin CD
play. In CD mode, press AM/FM to stop play and
begin radio play.
LOADING CDS – FOR INDASH
CD6/MP3 SYSTEM (if equipped)
Press the LOAD button and then a preset number
to select a slot. Press and hold LOAD to activateautoload, for loading up to 6 CDs.
1
2
3
4
5
6
7
8
9
10
11

HEADLAMP AND PANEL DIMMER CONTROLRotate the control clockwise one position from off to turn on the parking lamps.
Rotate two positions from off to also turn on the headlamps. Rotate counterclockwisefrom off to activate autolamp (if equipped), which provides lightsensitive automaticon/off control of the exterior lights and keeps them on for a short period of time afterthe ignition is turned off. When the control is in any position except high beams or off, pull the controltoward you to activate the foglamps (if equipped).
Use the panel dimmer control, located to the right of the headlamp control, to adjust the brightness of
the instrument panel during the headlamps and parking lamps operation. Rotate to the full up position,past the detent, to turn on the interior lamps. Rotate to the full down position, past the detent, toprevent the interior lights from illuminating when doors are opened.
POWER ADJUSTABLE PEDALS(if equipped)
Press and hold the top end of rocker control to adjust the accelerator and brake
pedal away from you. Hold the lower end of the control to move the pedals towardyou. Adjust the pedals only when the vehicle is stopped and the gearshift lever is in
the P (Park) position.
If equipped with memory function, the adjustable pedals, along with the driver's seat, can be
automaticallypositioned in two programmable positions using the control located on the driver's seat.
Refer to your Owner's Guide for instructions on how to use this memory feature.
SERVICE ENGINE SOON LAMPIlluminates briefly when the ignition is turned to the ON position to ensure the
system is functional. If the light comes on after the engine is started, refer to yourOwner's Guide. This lamp will illuminate if the fuel cap is not fully secured. In addition,
"Check fuel cap" will appear in the message center display. Make sure that the fuel capis secure by turning it clockwise 1/4 of a turn until it stops.
ABS WARNING LAMPIlluminates briefly when the ignition is turned to the ON position. If the light
comes on after the engine is started, refer to your Owner's Guide.
SPEED CONTROL(if equipped)
To set the speed control, press the ON button and release. Accelerate to the
desired speed and press the SET button and release. Once the system is engaged, an
icon will appear in the instrument cluster. To increase speed, tap the SET button and thespeed will increase in small increments each time, or use the accelerator pedal to reach
desired speed and then press SET. To reduce speed, press and hold CST until desired speed is reached.
Release or tap the CST button and speed will decrease in small increments. Also, you can depress the
brake pedal until desired speed is reached and press SET. Press RES/RESUME to return the vehicle to apreviously set speed if the vehicle is traveling more than 30 mph (48 km/h).
FOR REDUNDANT STEERING WHEEL CONTROLS(if equipped). To set the speed control,
press the right side of the ON/OFF switch. Accelerate to the desired speed and press the right side of the
CST/SET button and release. Once the system is engaged, an icon will appear in the instrument cluster.T
1
2
3
4
5