clock FORD FIVE HUNDRED 2005 D258 / 1.G Quick Reference Guide

Page 3 of 12

ADDITIONAL INFORMATION
2005 FORD FIVE HUNDRED
POWER MIRRORSTo adjust your mirrors, rotate
the control clockwise toadjust the right mirror andcounterclockwise to adjust
the left mirror. Move thecontrol in the direction you
wish to tilt the mirror. Thenrotate the control to thecenter position to lock themirrors in place.REMOTE ENTRY
SYSTEM
Your vehicle is equipped with
a remote entry system, whichallows you to lock or unlockthe vehicle's doors and open
the trunk without a key. It alsoallows you to activate thepanic alarm with the key in the
1 (LOCK) or 2 (ACC) position.
The remote entry system can
also control the memory seat,power mirrors, and adjustablepedals feature (if equipped).
For more information, pleaseconsult your Owner's Guide.
MEMORY FEATURE(IF EQUIPPED)This feature will allow you to set two
positions for the driver’s seat,power mirrors, and adjustablepedals (if equipped). Set theposition by pressing the SETbutton (indicator will illuminate) thenpress the 1 or 2 button to set theposition to either Driver 1 or Driver
2. This memory setting can then berecalled when you press the 1 or 2button, enter Customer Code 1 or2 on the keypad, or when you
press unlock on the remote entrysystem (one of your remotetransmitters is associated withDriver 1 and the other transmitter isassociated with Driver 2).
KEYLESS ENTRY
KEY PAD
The keyless entry key pad
can be used to lock or unlockthe doors without using a
key. It can also control the
memory seat, power mirrors,and adjustable pedalsfeatures (if equipped).
For more information, pleaseconsult your Owner’s Guide.
AUTOLOCKYour vehicle is equipped with
an autolock feature. Theautolock feature willautomatically lock all doorswhen your vehicle is in motionand meets a set of conditions,as described in your Owner’s
Guide. Your vehicle comeswith this feature enabled.
You can enable or disable this feature by following theactivation or deactivationprocedure outlined in yourOwner's Guide.ADJUSTABLE PEDALS(IF EQUIPPED)The accelerator and brake
pedal should only beadjusted when the vehicle isstopped and the gearshift is
in the P (Park) position. Pressthe top of the control toadjust the pedals away fromyou or press the bottom ofthe control to adjust thepedals toward you.
HOMELINK®(IF EQUIPPED)The HomeLink Wireless
Control System on thedriver's visor provides aconvenient way to replace upto three handheldtransmitters with a singledevice. This feature willoperate most garage doors,
entry gate operators, securitysystems, and home or office
lighting. For programming,please consult your Owner's Guide.
REVERSE SENSING
SYSTEM (IF EQUIPPED)The Reverse Sensing System
(RSS) sounds a tone to warnthe driver of obstacles nearthe rear bumper when R (Reverse) is selected andthe vehicle is moving atspeeds less than 3 mph (5 km/h). The system is noteffective at speeds above 3 mph (5 km/h) and may not detect certain angular ormoving objects.

Page 5 of 12

AUDIO SYSTEMS
PREMIUM/AUDIOPHILE INDASH 6CD SOUND SYSTEM (IF EQUIPPED)
LOADPress LOAD to begin the
CD load sequence. Pressand hold to autoload up to 6 CDs.DISC SELECTORPress or to select a
desired disc. Also use inmenu mode to select various settings.MP3 TRACK / FOLDER MODEIn Track mode, pressing
or SEEK will scroll
through all tracks on the disc.
In Folder mode, pressing
or SEEK will scroll
only through tracks within a
selected folder. FOLDER FUNCTIONPress or FOLDER to
access next or previousfolder on MP3 discs.1617
1311
1311432
ON/OFF/VOLUME CONTROLPress to turn the system
ON or OFF. Turn to increase ordecrease volume. If the volumeis set above a certain level andthe ignition is turned off, thevolume will come back on at a
“nominal” level when the ignitionswitch is turned back on.
TUNER / DISC SELECTORPress or SEEK to
manually go up or down theradio
frequency band or to
select a desired disc. Also use in menu mode to select various settings.
BASS / TREBLEPress MENU until Bass
or Treble settings aredisplayed, adjust using the
or SEEK control.
BALANCE / FADEPress MENU until
Balance is displayed, pressto adjust the audio betweenthe left and right speakers
using the or SEEK
controls. Press MENU
again to display Fade, press
the or SEEK controlsto adjust the audio betweenthe front and rear speakers.
CDPress to enter CD mode.
If a CD is already loaded intothe system, the CD will beginplaying where it last ended.
CD FAST FORWARDPress FF to manually
advance in a CD track.
CD REWIND Press REW to manually
reverse in a CD track.
CD EJECTPress to eject a CD.
Press and hold to eject all CDs.
AM / FMPress to select AM or FM
frequency bands.
SCAN FUNCTIONPress SCAN for a brief
sampling of radio stations or CD tracks. Press again to stop.
SEEK FUNCTIONPress or SEEK to
access the next/previousstrong station or track.
SETTING MEMORY PRESETSTo set a station: Press toselect AM or FM frequency
band, tune to a station, thenpress and hold a presetbutton until the sound returns.
SETTING THE CLOCKPress MENU until
SELECT HOUR or SELECTMINS is displayed. Press the
up and down or SEEKcontrol to manually increaseor decrease the time. Press
MENU again to disengage
clock mode.
10
1113
10
7
1113
12
7
1
14
15
6
1311
101311
10
1311
10
1113
5
PREMIUM INDASH SIX CD / MP3 SOUND SYSTEM
5
2
3
4
6
711
141516171819
12
10
8
913
1
20

Page 10 of 12

HEADLAMP CONTROLTurning the headlamp control
clockwise to the first positionturns on the parking lamps,instrument panel lamps,license plate lamps, and thetail lamps. Continuing to turnthe headlamp control to thesecond position turns on the
headlamps. To use theautolamp lightsensitive,automatic onoff control forthe headlamps, turn theheadlamp control
counterclockwise. To turnautolamps off, turn thecontrol clockwise to the OFF
position. To activate the highbeams, simply pull the turnsignal lever towards you tothe second detent. Pull thelever towards you again todeactivate high beams. Usethe same lever to activate the
“Flash to Pass” feature. Pullthe lever towards you to thefirst detent to activate and release it to deactivate.
1
PANEL DIMMERUse to adjust the brightness
of the instrument panel andall applicable switches in thevehicle during headlamp andparking lamp operation.Move the control to the fullupright position, past detent,to turn on the interior lamps.
2
FOGLAMP CONTROL(IF EQUIPPED)With the ignition on, the
foglamps can be turned onwhen the headlamp control is in the parking lamp,headlamp or autolampposition, and the high beamsare not on. Simply pull theheadlamp control toward youto turn on the foglamps. Thefoglamp indicator light willilluminate. The foglamps willnot operate when the highbeams are activated.
3
WINDSHIELD WIPER
WASHER
The multifunction lever
controls the windshield wipermodes, speeds, and the
windshield washer. Forintermittent operation, movethe control up one position.
You can then adjust the
rotary control to the desired
interval speed. For normal orlow wiper speed, move thecontrol up two positions from
OFF. For high speedoperation, move the control
up three positions from OFF.
For windshield washercontrol, pull the end of the
lever toward you. With aquick pull and hold, thewipers will swipe three times
with washer fluid. With a longpull and hold, the wipers willactivate washer fluid for up toten seconds.
4