Info GENESIS G90 2023 Owners Manual

Page 267 of 676

5-126
Convenience Features
Information
ORS051085
Never place anything near the ambient
light/solar sensor to ensure better control
of the heating and cooling system.
Manual Temperature Control
Mode
The heating and cooling system can be
controlled manually by pushing buttons
other than the AUTO button. In this case,
the system works sequentially according
to the order of buttons selected.
When pressing any button except the
AUTO button while using automatic
operation, the functions not selected will
be controlled automatically.
1. Start the vehicle.
2. Set the mode to the desired position.
To improve the effectiveness of
heating and cooling, select the mode
according to the following:
[Heating:
[Cooling:
3. Set the temperature control to the
desired position.
4. Set the air intake control to Fresh or
Recirculation mode.
5. Set the fan speed control to the
desired speed.
6. If air conditioning is desired, turn the
air conditioning system on.
7. Press the AUTO button to convert to
full automatic control of the system.
The climate control system settings
will be maintained, even when the
vehicle is turned OFF. However, the
climate control system settings will be
initialized when the battery has been
discharged, or when the cables have
been disconnected.
In this case, adjust the climate control
system settings again.

Page 268 of 676

5-127
05
Mode selection
ORS052106N
A : Front seat control,
B : Rear seat control
Front seat mode selection
[Touch each air flow direction on the
climate control information screen to
select the desired flow direction.
[Press the SYNC button and when
the indicator light on the button
turns off, the air flow direction of the
driver’s seat, passenger seat, and rear
seat can be controlled individually.
However, passengers and rear seats
cannot select
.
[Touch REAR M to control the second
row seat mode selection from the
front seats.
[You may select 2~3 modes at the
same time.
ORS051108
ORS051142L
A : Rear seat control,
B : Front seat control
Rear seat mode selection
[Touch each air flow direction on the
armrest touchscreen to select the
desired air flow direction.
[Front seat air flow direction can be
selected individually for each seats.
[Air flow direction of the rear left and
right seats change together.

Page 271 of 676

5-130
Convenience Features
Front windshield defroster
ORS051110
Defrost-level (A, D)
Press the button, and the indicator light
on the button will illuminate and the
windshield defroster indicator will appear
on the climate control information
screen.
Most of the air flow is directed to the
windshield with a small amount of air
directed to the side window defrosters.
When Defogging logic is enabled, Fresh
mode is selected and air conditioning
is selected according to outside
temperature.
Press the button again, the indicator light
will turn off and the previous settings will
be selected.
Instrument panel vents
ORS051111
ORS051112
A : Front seat,
B : Rear seat
The instrument panel vent air flow can be
directed up/down or left/right using the
vent adjustment lever.
The air flow can also be CLOSED using
the vent adjustment lever.
Move the lever to
position to close,
and to position to open.

Page 272 of 676

5-131
05
Temperature control
ORS052113N
ORS052149N
A : Front seat control from the front,
B : Rear seat control from the front,
C : Rear seat control from the rear,
D : Front seat control from the rear
Set the desired temperature using
the temperature control switch or the
icon button on the climate control
information screen.
[Push the switch up (red) to increase
the temperature. Push the switch
down (blue) to decrease temperature/
[Press the icon (
/ ) in the
climate control information screen to
adjust the rear seat temperature from
the front seat.
[The temperature will increase or
decrease by 1°F (0.5°C) for each
incremental location. When set to
the lowest temperature setting,
the air conditioning will operate
continuously.
SYNC
ORS052117N
ORS052136N
A : Front seat,
B : Rear seat
$GMXVWLQJWKHWHPSHUDWXUHDLUIORZ
direction and fan speed equally
[Press the SYNC button (indicator
light ON) from the front seat, the
front and rear seat temperature, air
flow direction and fan speed will be
adjusted same as the driver’s control.
[Press the SYNC button (indicator
light ON) from the rear seat, the
front and rear seat temperature, air
flow direction and fan speed will
be adjusted same as the rear seat
control.
[The SYNC button does not operate
when the climate control system is off.

Page 273 of 676

5-132
Convenience Features
Air intake control
ORS051118
ORS051137
A : Front seat,
B : Rear seat
The air intake control button is used to
select either Fresh mode (outside air) or
Recirculation mode (cabin air).
Recirculation mode
When Recirculation mode
is selected, air from the
passenger compartment will
be recirculated through the
system and heated or cooled
according to the function
selected.
Fresh mode
When Fresh mode is selected,
air enters the vehicle from
outside and is heated or
cooled according to the
function selected.
Information
2SHUDWLQJWKHV\VWHPSULPDULO\LQ)UHVK
mode is recommended. Use Recirculation
mode temporarily only when needed.
Prolonged operation of the heater in
Recirculation mode and without the air
FRQGLWLRQLQJ21FDQFDXVHIRJJLQJRIWKH
windshield. In addition, prolonged use of
WKHDLUFRQGLWLRQLQJ21LQ5HFLUFXODWLRQ
mode may result in excessively dry,
dehumidified air in the cabin and may
promote formation of musty vent odor due
to stagnant air.
WARNING
[Continued use of the climate control
system operation in Recirculation
mode for a prolonged period of
time may cause drowsiness to the
occupants in the cabin. This may lead
to loss of vehicle control which may
lead to an accident.
[Continued use of the climate control
system operation in Recirculation
PRGHZLWKWKHDLUFRQGLWLRQLQJ2))
may allow humidity to increase
inside the cabin. This may cause
condensation to accumulate on the
windshield and obscure visibility.
[Do not sleep in your vehicle or
remain parked in your vehicle with
the windows up and either the
heater or the air conditioning ON for
prolonged periods of time. Doing so
may increase the levels of carbon
dioxide in the cabin which may lead
to serious injury or death.

Page 274 of 676

5-133
05
Fan speed control
The fan speed can be set to the desired
speed touching the or icon on the
climate control information screen or
rear armrest touchscreen.
ORS052145N
ORS052146N
ORS052316N
A : Front seat control from the front,
B : Rear seat control from the front,
C : Front seat control from the rear,
D : Rear seat control from the rear
When the front and rear fan speed can be
DGMXVWHG
The driver seat, front passenger seat, and
the rear seat fan speed can be adjusted
individually.

Page 276 of 676

5-135
05
ORS051124
ORS051139L
A : Front seat,
B : Rear seat
Press from the climate control
information screen or armrest
touchscreen to select the desired
fragrance intensity.
[Intensity can be selected among
Strong, Medium and Light. Pressing
the button each time will change
the intensity in the order of Strong,
Medium, Light and Off.
[The fragrance cannot be selected with
the button. Fragrance can only be
selected from the settings menu.
ORS051244
How to replace cartridges
1. Turn the engine off, and open the
glove box.
2. Press the upper part of the diffuser
tray.
3. Replace the cartridge.
Information
[For smooth operation of diffuser, it is
recommended to install 2 cartridges.
[If the cartridge is empty or diffuser
replacement alarm is displayed, replace
with a new cartridge.
[The built-in diffuser may not work if
the cartridge is not installed properly.
&KHFNZKHWKHUWKHFDUWULGJHLVLQVWDOOHG
properly.

Page 282 of 676

5-141
05
PCM parts
ORS052327N
- Size: 2x2x1 in. (53x53x27 mm)
- Weight: 1.6 oz (46 g)
A: Upper cover
B: PCB & Connector
C: Water protection PCB cover
D: Photo-catalyst
E: Lower cover
F: Leakage protection seal
Direction for use
The PCM, Photo-catalyst Air Purifier
Module for HVAC is activated
automatically when the engine of
automobile is started and deactivated
automatically when the engine is turned
off.
NOTICE
[Do not disassemble, modify or
repair. Any changes or modifications
to product can void your
manufacturer’s warranty.
[If you need servicing, visit a
designated service center.
[Do not use the product for anything
other than its original purpose.
[Do not drop or cause excessive
impact to the product.
[Do not apply any other substances
on the photo catalyst surface.
[If water is on the product, dry it
thoroughly before using it.
NOTICE
[Disposal
Dispose of contents and containers
according to the regulations
stipulated in the wastes control act.
[Storage
-Do not store near acids. As packed
massive products may constitute a
manual handling risk. (e.g., sharp)
-Do not store in areas with high
concentrations of dust or airborne
materials.
WARNING
[This product should be sold
only through and be installed by
automobiles. Other uses are not
acceptable device.
[PCM may be particularly helpful
when additional ventilation with
outdoor air is not possible without
compromising indoor comfort
(temperature or humidity), or when
outdoor air pollution is high.
[The use of PCM alone cannot
ensure adequate indoor air quality,
particularly where significant
pollutant sources are present, and
ventilation is insufficient.
Information
(3$FRPSDQ\QXPEHU.25

Page 285 of 676

5-144
Convenience Features
Rear Window Defroster
NOTICE
To prevent damage to the rear window
defroster conducting elements bonded
to the inside surface of the rear window,
never use sharp instruments or window
cleaners containing abrasives to clean
the window.
ORS051132
The defroster heats the window to
remove frost, fog and thin ice from the
interior and exterior of the rear window,
while the engine is running.
[To activate the rear window defroster,
press the rear window defroster
button located in the center control
panel. The indicator on the rear
window defroster button illuminates
when the defroster is ON.
[To turn off the defroster, press the rear
window defroster button again.
Information
[If there is heavy accumulation of snow
on the rear window, brush it off before
operating the rear defroster.
[The rear window defroster
automatically turns off after
approximately 20 minutes or when the
(QJLQH6WDUW6WRSEXWWRQLVLQWKH2))
position.
Side view mirror defroster
If your vehicle is equipped with the side
view mirror defrosters, they will operate
at the same time you turn on the rear
window defroster.

Page 286 of 676

5-145
05
Auto Defogging System
ORS051085
Auto defogging helps reduce the
possibility of fogging up the inside of the
windshield by automatically sensing the
moisture on inside the windshield.
The auto defogging system operates
when the heater or air conditioning is on.
Information
The auto defogging system may not
operate normally, when the outside
WHPSHUDWXUHLVEHORZ

Page:   < prev 1-10 ... 91-100 101-110 111-120 121-130 131-140 141-150 151-160 161-170 171-180 ... 290 next >