ECO mode GENESIS G90 2023 User Guide

5-127
05
Mode selection
ORS052106N
A : Front seat control,
B : Rear seat control
Front seat mode selection

[Touch each air flow direction on the
climate control information screen to
select the desired flow direction.

[Press the SYNC button and when
the indicator light on the button
turns off, the air flow direction of the
driver’s seat, passenger seat, and rear
seat can be controlled individually.
However, passengers and rear seats
cannot select
.

[Touch REAR M to control the second
row seat mode selection from the
front seats.

[You may select 2~3 modes at the
same time.
ORS051108
ORS051142L
A : Rear seat control,
B : Front seat control
Rear seat mode selection

[Touch each air flow direction on the
armrest touchscreen to select the
desired air flow direction.

[Front seat air flow direction can be
selected individually for each seats.

[Air flow direction of the rear left and
right seats change together.

5-132
Convenience Features
Air intake control
ORS051118
ORS051137
A : Front seat,
B : Rear seat
The air intake control button is used to
select either Fresh mode (outside air) or
Recirculation mode (cabin air).
Recirculation mode
When Recirculation mode
is selected, air from the
passenger compartment will
be recirculated through the
system and heated or cooled
according to the function
selected.
Fresh mode
When Fresh mode is selected,
air enters the vehicle from
outside and is heated or
cooled according to the
function selected.
Information
2SHUDWLQJWKHV\VWHPSULPDULO\LQ)UHVK
mode is recommended. Use Recirculation
mode temporarily only when needed.
Prolonged operation of the heater in
Recirculation mode and without the air
FRQGLWLRQLQJ21FDQFDXVHIRJJLQJRIWKH
windshield. In addition, prolonged use of
WKHDLUFRQGLWLRQLQJ21LQ5HFLUFXODWLRQ
mode may result in excessively dry,
dehumidified air in the cabin and may
promote formation of musty vent odor due
to stagnant air.
WARNING

[Continued use of the climate control
system operation in Recirculation
mode for a prolonged period of
time may cause drowsiness to the
occupants in the cabin. This may lead
to loss of vehicle control which may
lead to an accident.

[Continued use of the climate control
system operation in Recirculation
PRGHZLWKWKHDLUFRQGLWLRQLQJ2))
may allow humidity to increase
inside the cabin. This may cause
condensation to accumulate on the
windshield and obscure visibility.

[Do not sleep in your vehicle or
remain parked in your vehicle with
the windows up and either the
heater or the air conditioning ON for
prolonged periods of time. Doing so
may increase the levels of carbon
dioxide in the cabin which may lead
to serious injury or death.

5-142
Convenience Features
WARNING
Windshield heating
Do not use the
position during
cooling operation in extremely humid
weather. The difference between the
temperature of the outside air and that
of the windshield could cause the outer
surface of the windshield to fog up,
causing loss of visibility could cause
an accident resulting in serious injury
or death. In this case, set the mode
selection button to the
position
and fan speed control knob to a lower
speed.

[For maximum defrost performance,
set the temperature control to the
highest temperature setting and
the fan speed control to the highest
setting.

[If warm air to the floor is desired while
defrosting or defogging, set the mode
to the floor-defrost position.

[Before driving, clear all snow and ice
from the windshield, rear window,
side view mirrors and all side
windows.

[Clear all snow and ice from the
hood and air inlet in the cowl grill
to improve heater and defroster
efficiency and to reduce the
probability of fogging up the inside of
the windshield.
NOTICE
If the engine temperature is still cold
after starting, then a brief engine warm
up period may be required for the
vented air flow to become warm or hot.
To Defog Inside Windshield
ORS051131L
1. Select the desired fan speed.
2. Select the desired temperature.
3. Press the defroster button (
).
4. Fresh mode will be selected
automatically.
Check to make sure the air intake control
is in Fresh mode. If the air intake control
indicator light is illuminated, press the
button once to enable Fresh mode
(indicator light OFF).
If the
position is selected, the fan
speed is automatically increased.
:,1'6+,(/''()5267,1*$1''()2**,1*

5-143
05
To Defrost Inside Windshield
ORS051130
1. Set the fan speed to the highest
(extreme right) position.
2. Set the temperature to the extreme
hot (HI) position.
3. Press the defroster button (
).
4. Fresh mode will be selected
automatically.
Check to make sure the air intake control
is in Fresh mode. If the air intake control
indicator light is illuminated, press the
button once to enable Fresh mode
(indicator light OFF).
If the
position is selected, lower fan
speed is adjusted to a higher fan speed.
Defogging Logic
To reduce the probability of fogging
up the inside of the windshield, the air
intake or air conditioning are controlled
automatically according to certain
conditions. To cancel or reset the
defogging logic, do the following.
1. Press the Engine Start/Stop button to
the ON position.
2. Press the defroster button (
) or
().
3. While pressing the air conditioning
button (A/C), press the air intake
control button at least 5 times within
3 seconds.
The air intake control button indicator
will blink 3 times to indicate that the
defogging logic has been disabled.
Repeat the steps again to re-enable the
defogging logic.
If the battery has been discharged or
disconnected, it resets to the defog logic
status.

5-147
05
Recirculating Air When Washer
)OXLGLV8VHG
Recirculation mode automatically
activates to reduce any objectionable
scent of the washer fluid from entering
the cabin when the windshield washer is
used.
Turning Activate upon Washer Fluid
Use ON or OFF
&OLPDWHFRQWUROV\VWHP
To turn the Activate upon Washer Fluid
Use feature on or off, select Floor level
(
) mode, and then press the air
intake control () button four times
within two seconds while pressing the
A/C icon.
When Activate upon Washer Fluid Use
ON is turned on, the air intake control
button indicator will blink 6 times. When
turned off, the indicator will blink 3
times.
Infotainment system
Activate upon Washer Fluid Use can be
turned on and off by selecting ‘Setup

5-148
Convenience Features
Recirculation Mode Plus (if
equipped)

[To prevent the inflow of polluted air
into the vehicle when passing through
a tunnel or air polluted area, this
function automatically switches the
air conditioner to Recirculation mode
for about 7 seconds before entering a
tunnel based on the map information
of the navigation and the speed of the
vehicle.

[The windows automatically closes
before entering a tunnel and area
requiring air recirculation. The
windows open to the previous
position after passing the area. If the
power window switch is operated
before the window opens, the
window does not open to the previous
position.

[To use these features, it must be
enabled from the Settings menu in the
infotainment system screen. Select:
-6HWXS

5-168
Convenience Features
(2) SEEK/PRESET (< / >)
If the SEEK/PRESET switch (optical
mouse) is swiped to the left or right
and held for 0.8 second or more, it will
function in the following modes:

[
Radio mode
It will function as the AUTO SEEK
select button. It will SEEK until you
release the button.

[
Media mode
It will function as the FF/RW button.
If the SEEK/PRESET switch (optical
mouse) is swiped to the left or right , it
will function in the following modes:

[
Radio mode
It will function by moving between
stored PRESET STATIONS

[
Media mode
It will function as the TRACK UP/
DOWN button.
(3) Mode ()
Press the MODE button to toggle
through the Radio mode or Media mode.
(4) Custom ()
Press the Custom button to set
frequently used features.
Infotainment System
ORS051214
ORS052325N
A: Front seat,
B: Rear seat (if equipped) M: Infotainment system controller
Voice Recognition
ORS051221
See additional information in supplied
Infotainment Manual.

6
Idle Stop and Go (ISG) ...................................................................................6-49ISG System Operation ............................................................................................... 6-49
ISG System Off............................................................................................................ 6-51
Forced to Restart Engine ...........................................................................................6-52
ISG Malfunction ..........................................................................................................6-52
Calibrating the Battery Sensor ..................................................................................6-53
Coasting .......................................................................................................... 6-54Coasting Setting ........................................................................................................ 6-54
Coasting Operating Conditions ................................................................................ 6-54
Coasting Release Conditions ....................................................................................6-55
Predictive Shift ................................................................................................ 6-56Predictive shift Operating Conditions ..................................................................... 6-56
Predictive shift off Conditions ................................................................................. 6-56
Limitations of the System ......................................................................................... 6-57
Checking Operation on the Instrument Cluster ....................................................... 6-57
How Predictive Shift Operates ................................................................................. 6-59
Drive Mode Integrated Control System ..........................................................6-61Selecting Drive Mode ................................................................................................. 6-61
ECO, COMFORT, SPORT Mode Features ................................................................. 6-62
CUSTOM Mode Features .......................................................................................... 6-63
Road Active Noise Control ............................................................................. 6-65System Malfunction .................................................................................................. 6-65
Active Sound Design....................................................................................... 6-65
Special Driving Conditions .............................................................................6-66
Hazardous Driving Conditions ................................................................................. 6-66
Rocking the Vehicle .................................................................................................. 6-66
Smooth Cornering ......................................................................................................6-67
Driving at Night ..........................................................................................................6-67
Driving in the Rain ..................................................................................................... 6-68
Driving in Flooded Areas ........................................................................................... 6-68
Highway Driving ........................................................................................................ 6-68
Winter Driving .................................................................................................6-69Snow or Icy Conditions ............................................................................................. 6-69
Winter Precautions ..................................................................................................... 6-73
Vehicle Load Limit .......................................................................................... 6-75The Loading Information Label ................................................................................. 6-75
Trailer Towing .................................................................................................. 6-79

6-7
06
Starting the Engine
WARNING

[Always wear appropriate shoes when
operating your vehicle. Unsuitable
shoes, such as high heels, ski boots,
sandals, flip flops, etc., may interfere
with your ability to use the brake and
accelerator pedals.

[Do not start the vehicle with the
accelerator pedal depressed.
The vehicle can move which can lead
to an accident.

[Wait until the engine RPM is normal.
The vehicle may suddenly move if
the brake pedal is released when the
RPM is high.
Information

[The vehicle will start by pressing the
Engine Start/Stop button, only when
the smart key is in the vehicle.

[Even if the smart key is in the vehicle,
and when it is far away from the driver,
the engine may not start.

[When the Engine Start/Stop button
is in the ACC or ON position, if any
door is open, the system checks for the
smart key. When the smart key is not
in the vehicle, the “
” indicator
will blink and the warning &#39;Key not in
vehicle&#39; will come on. When all doors
are closed, the chime will also sound for
about 5 seconds. Keep the smart key in
the vehicle.1. Always carry the smart key with you.
2. Make sure the parking brake is
applied.
3. Make sure the gear is shifted to P
(Park) by pressing the P button.
4. Depress the brake pedal.
5. Press the Engine Start/Stop button.
Information

[Do not wait for the engine to warm up
while the vehicle remains stationary.
Start driving at moderate engine
speeds. Steep accelerating and
decelerating should be avoided.

[Always start the vehicle with your foot
on the brake pedal. Do not depress the
accelerator while starting the vehicle.
Do not race the engine while warming
it up.

6-21
06
Paddle Shifter (Manual Shift
Mode)
ORS061009
The paddle shifter allows the driver to
shift gears without taking one’s hands off
the steering wheel.
The paddle shifter operates as follow.

[Pull the [+] or [-] paddle shifter once
to shift up or down one gear and the
system changes from automatic shift
mode to manual shift mode.

[To change back to automatic shift
mode from manual shift mode, do one
of the following:
-Pull the [+] paddle shifter for more
than one second.
-Drive the vehicle under 4 mph (7
km/h)
-Gently depress the accelerator
pedal for more than 6 seconds.
-Rotate the shift dial to the D (Drive)
position.
Information
If the [+] and [-] paddle shifters are pulled
at the same time, gear shift may not occur.
Good Driving Practices

[Never shift the gear from P (Park) or
N (Neutral) to any other position with
the accelerator pedal depressed.

[Never shift the gear into P (Park) when
the vehicle is in motion.
Be sure the vehicle is completely
stopped before you attempt to shift
into R (Reverse) or D (Drive).

[Do not shift the gear to N (Neutral)
when driving. If the gear is shifted to
N (Neutral) while driving, the vehicle
loses the ability to provide engine
braking. Doing so may increase the
risk of an accident.
Also, shifting the gear back to
D (Drive) while the vehicle is
moving may severely damage the
transmission.

[When driving uphill or downhill,
always shift to D (Drive) for driving
forward or shift to R (Reverse) for
driving rearwards. After selecting
D (Drive) or R (Reverse), check the
gear position indicated on the cluster
before driving. If the vehicle moves in
the opposite direction of the selected
gear, the engine may turn off and a
serious accident might occur due to
degraded brake performance.

[Do not drive with your foot resting
on the brake pedal. Even light, but
consistent pedal pressure can result
in the brakes overheating, brake wear
and possibly even brake failure.