cruise control GENESIS G90 2023 User Guide

Page 467 of 676

7-78
Driver Assistance System
Operating conditions for
Acceleration Assist
Overtaking Acceleration Assist operates
when the turn signal indicator is turned
on to the left while Smart Cruise Control
is operating, and the following conditions
are satisfied:
[Your vehicle speed is above 40 mph
(60 km/h)
[A vehicle is detected in front of your
vehicle
Overtaking Acceleration Assist does not
operate in the following conditions.
[The hazard warning flasher is on
[Vehicle speed is reduced to maintain
distance with the vehicle in front
:$51,1*
When the turn signal indicator is turned
RQWRWKHOHIWZKLOHWKHUHLVDYHKLFOH
DKHDGWKHYHKLFOHPD\DFFHOHUDWH
WHPSRUDULO\3D\DWWHQWLRQWRWKHURDG
FRQGLWLRQVDWDOOWLPHV
Turning on Smart Cruise Control
ORS071025
[Press the Driving Assist button to turn
on Smart Cruise Control. The speed
will be set to the current speed on the
cluster.
[If there is no vehicle in front of you,
the set speed will be maintained, but
if there is a vehicle in front of you,
the speed may decrease to maintain
the distance to the vehicle ahead. If
the vehicle ahead accelerates, your
vehicle will travel at a steady cruising
speed after accelerating to the set
speed.
Information
,I\RXUYHKLFOHVSHHGLVEHWZHHQPSK
NPK ZKHQ\RXSUHVVWKH'ULYLQJ
$VVLVWEXWWRQWKHVHWVSHHGZLOOEHVHWWR
PSK NPK 

Page 468 of 676

7-79
07
Setting vehicle distance
ORS071186
Each time the button is pressed, the
headway changes as follows:
Distance 4 Distance 3
Distance 1Distance 2
Information
[,I\RXGULYHDWPSK NPK WKH
distance is maintained as follows:
'LVWDQFH
DSSUR[LPDWHO\IW P
'LVWDQFH
DSSUR[LPDWHO\IW P
Distance 2 -
DSSUR[LPDWHO\IW P
'LVWDQFH
DSSUR[LPDWHO\IW P
[The distance is set to the last set
distance when the engine is restarted,
or when Smart Cruise Control was
WHPSRUDULO\FDQFHOHG
Increasing set speed
ORS071182
[Push the + switch up and release
it immediately. The set speed will
increase by 1 mph (1 km/h) each time
the switch is operated in this manner.
[Push the + switch up and hold it while
monitoring the set speed on the
cluster. The set speed will increase by
5 mph (10 km/h) each time the switch
is operated in this manner. Release
the switch when the desired speed is
shown, and the vehicle will accelerate
to that speed. You can set the speed
to 120 mph (200 km/h).
:$51,1*
&KHFNWKHGULYLQJFRQGLWLRQEHIRUH
XVLQJWKHVZLWFK'ULYLQJVSHHGPD\
VKDUSO\LQFUHDVHZKHQ\RXSXVKXSDQG
KROGWKHVZLWFK

Page 469 of 676

7-80
Driver Assistance System
Decreasing set speed
ORS071183
[Push the - switch down and release
it immediately. The set speed will
decrease by 1 mph (1 km/h) each time
the switch is operated in this manner.
[Push the - switch down and hold it
while monitoring the set speed on the
cluster. The set speed will decrease by
5 mph (10 km/h) each time the switch
is operated in this manner.
Release the switch at the speed you
want to maintain. You can set the
speed to 20 mph (30 km/h).
Temporarily cancelling Smart Cruise
Control
ORS071289L
Press the switch or depress the
brake pedal to temporarily cancel Smart
Cruise Control.
Resuming Smart Cruise Control
ORS071184
To resume Smart Cruise Control after the
function was canceled, operate the +, -
or
switch.
If you push the + switch up or - switch
down, vehicle speed will be set to the
current speed on the cluster.
If you press the
switch, vehicle
speed will resume to the preset speed.
:$51,1*
&KHFNWKHGULYLQJFRQGLWLRQEHIRUH
using the VZLWFK'ULYLQJVSHHG
PD\VKDUSO\LQFUHDVHRUGHFUHDVHZKHQ
\RXSUHVVWKH
VZLWFK

Page 470 of 676

7-81
07
Turning off Smart Cruise Control
ORS071025
Press the Driving Assist button to turn
Smart Cruise Control off.
Information
,I\RXUYHKLFOHLVHTXLSSHGZLWK0DQXDO
6SHHG/LPLW$VVLVWSUHVVDQGKROGWKH
Driving Assist button to turn off Smart
&UXLVH&RQWURO+RZHYHU0DQXDO6SHHG
Limit Assist will turn on.
CAUTION
'RQRWXVHWKHVZLWFKHVDQGEXWWRQV
DWWKHVDPHWLPH6PDUW&UXLVH&RQWURO
PD\QRWRSHUDWHSURSHUO\
Displaying operating status
You can see the status of the Smart
Cruise Control operation in the Driving
Assist view on the cluster. Refer to “View
Modes” section in chapter 4.
Smart Cruise Control will be displayed
as below depending on the status of the
function.
ORS072145N
A: Operating,
B: Temporarily canceled
[When operating
(1) Whether there is a vehicle ahead
and the selected distance level
(2) Set speed
(3) Whether there is a vehicle ahead
and the target vehicle distance
[When temporarily canceled
(1) Your vehicle (shaded)
(2) Previous set speed (shaded)
(3) Vehicle ahead and distance level
(shaded)

Page 471 of 676

7-82
Driver Assistance System
Information
[The distance of the front vehicle on the
FOXVWHULVGLVSOD\HGDFFRUGLQJWRWKH
actual distance between your vehicle
and the vehicle ahead.
[The target distance may vary according
WRWKHYHKLFOHVSHHGDQGWKHVHW
GLVWDQFHOHYHO,IWKHYHKLFOHVSHHGLV
low, even though the vehicle distance
have changed, the change of the target
vehicle distance may be small.
[The images and colors in the
instrument cluster may differ
GHSHQGLQJRQWKHFOXVWHUW\SHRUWKHPH
selected from the settings menu.
Accelerating temporarily
ORS072147N
If you want to speed up temporarily
without altering the set speed while
Smart Cruise Control is operating,
depress the accelerator pedal. While the
accelerator pedal is depressed, the set
speed, distance level and target distance
will blink on the cluster.
However, if the accelerator pedal is
depressed insufficiently, the vehicle may
decelerate.
:$51,1*
%HFDUHIXOZKHQDFFHOHUDWLQJ
WHPSRUDULO\EHFDXVHWKHVSHHGDQG
GLVWDQFHLVQRWFRQWUROOHGDXWRPDWLFDOO\
HYHQLIWKHUHLVDYHKLFOHLQIURQWRI\RX

Page 472 of 676

7-83
07
Based on Driving Style operation
ORS071094LORS072148N
When Based on Driving Style is
operating, ‘Driving Style Adaptive SCC’
message will appear on the cluster for
2 seconds, and the distance level and
target distance will be displayed based
on the driving style.
Temporarily cancelling Smart Cruise
Control
ORS071118L
Smart Cruise Control will be temporarily
canceled automatically when:
[The vehicle speed is above 130 mph
(210 km/h)
[The vehicle is stopped for a certain
period of time
[The accelerator pedal is continuously
depressed for a certain period of time
[The conditions for Smart Cruise
Control to operate is not satisfied
If Smart Cruise Control is temporarily
canceled automatically, the ‘Smart
Cruise Control deactivated’ warning
message will appear on the cluster, and
an audible warning will sound to warn
the driver.
Information
,I6PDUW&UXLVH&RQWUROLVWHPSRUDULO\
canceled while the vehicle is at a
standstill with the function activated,
(3% (OHFWURQLF3DUNLQJ%UDNH PD\EH
DSSOLHG
:$51,1*
When Smart Cruise Control is
WHPSRUDULO\FDQFHOHGGLVWDQFHZLWKWKH
IURQWYHKLFOHZLOOQRWEHPDLQWDLQHG
$OZD\VKDYH\RXUH\HVRQWKHURDG
ZKLOHGULYLQJDQGLIQHFHVVDU\GHSUHVV
WKHEUDNHSHGDOWRUHGXFH\RXUGULYLQJ
speed in order to maintain a safe
GLVWDQFH

Page 473 of 676

7-84
Driver Assistance System
Smart Cruise Control conditions not
satisfied
OTM070112N
If the Driving Assist button, + switch,
- switch or switch is pushed
when Smart Cruise Control operating
conditions are not satisfied, the ‘Smart
Cruise Control conditions not met’ will
appear on the cluster, and an audible
warning will sound.
In traffic situation
OTM070114L
In traffic, your vehicle will stop if the
vehicle ahead of you stops. Also, if the
vehicle ahead of you starts moving, your
vehicle will start as well. In addition, after
the vehicle has stopped and a certain
time have passed, the ‘Use switch or
pedal to accelerate’ message will appear
on the cluster. Depress the accelerator
pedal or operate the + switch, - switch or
switch to start driving.
Warning road conditions ahead
ORS071120L
In the following situation, the ‘Watch for
surrounding vehicles’ warning message
will appear on the cluster, and an audible
warning will sound to warn the driver of
road conditions ahead.
[The vehicle in front disappears when
Smart Cruise Control is maintaining
the distance with the vehicle ahead
while driving below a certain speed.
:$51,1*
$OZD\VSD\DWWHQWLRQWRYHKLFOHVRU
REMHFWVWKDWPD\VXGGHQO\DSSHDULQ
IURQWRI\RXDQGLIQHFHVVDU\GHSUHVV
WKHEUDNHSHGDOWRUHGXFH\RXUGULYLQJ
speed in order to maintain a safe
GLVWDQFH

Page 474 of 676

7-85
07
Collision Warning
ORS071096L
While Smart Cruise Control is operating,
when the collision risk with the vehicle
ahead is high, the ‘Collision Warning’
warning message will appear on the
cluster, and an audible warning will
sound to warn the driver. Always have
your eyes on the road while driving, and
if necessary, depress the brake pedal to
reduce your driving speed in order to
maintain a safe distance.
:$51,1*
,QWKHIROORZLQJVLWXDWLRQV6PDUW&UXLVH
&RQWUROPD\QRWZDUQWKHGULYHURID
FROOLVLRQ
[7KHGLVWDQFHIURPWKHIURQWYHKLFOH
LVQHDURUWKHYHKLFOHVSHHGRIWKH
IURQWYHKLFOHLVIDVWHURUVLPLODUWR
\RXUYHKLFOH
[7KHVSHHGRIWKHIURQWYHKLFOHLVYHU\
slow or is at a standstill
[The accelerator pedal is depressed
right after Smart Cruise Control is
turned on
:$51,1*
Take the following precautions when
using Smart Cruise Control:
[Smart Cruise Control does not
VXEVWLWXWHIRUSURSHUDQGVDIH
GULYLQJ,WLVWKHUHVSRQVLELOLW\RIWKH
GULYHUWRDOZD\VFKHFNWKHVSHHGDQG
GLVWDQFHWRWKHYHKLFOHDKHDG
[6PDUW&UXLVH&RQWUROPD\QRW
UHFRJQL]HXQH[SHFWHGDQGVXGGHQ
VLWXDWLRQVRUFRPSOH[GULYLQJ
VLWXDWLRQVVRDOZD\VSD\DWWHQWLRQWR
GULYLQJFRQGLWLRQVDQGFRQWURO\RXU
YHKLFOHVSHHG
[.HHS6PDUW&UXLVH&RQWURORIIZKHQ
WKHIXQFWLRQLVQRWLQXVHWRDYRLG
LQDGYHUWHQWO\VHWWLQJDVSHHG
['RQRWRSHQWKHGRRURUOHDYHWKH
YHKLFOHZKHQ6PDUW&UXLVH&RQWURO
LVRSHUDWLQJHYHQLIWKHYHKLFOHLV
VWRSSHG
[$OZD\VEHDZDUHRIWKHVHOHFWHG
VSHHGDQGKHDGZD\GLVWDQFH
[.HHSDVDIHGLVWDQFHDFFRUGLQJWR
URDGFRQGLWLRQVDQGYHKLFOHVSHHG
,IWKHKHDGZD\GLVWDQFHLVWRRFORVH
GXULQJKLJKVSHHGGULYLQJDVHULRXV
FROOLVLRQPD\UHVXOW
[When maintaining distance with
WKHYHKLFOHDKHDGLIWKHIURQW
YHKLFOHGLVDSSHDUV6PDUW&UXLVH
&RQWUROPD\VXGGHQO\DFFHOHUDWHWR
WKHVHWVSHHG$OZD\VEHDZDUHRI
XQH[SHFWHGDQGVXGGHQVLWXDWLRQV
IURPRFFXUULQJ
[9HKLFOHVSHHGPD\GHFUHDVHRQDQ
upward slope and increase on a
GRZQZDUGVORSH
[$OZD\VEHDZDUHRIVLWXDWLRQVVXFK
DVZKHQDYHKLFOHFXWVLQVXGGHQO\
[:KHQ\RXDUHWRZLQJDWUDLOHURU
DQRWKHUYHKLFOHWXUQRII6PDUW
&UXLVH&RQWUROIRUVDIHW\UHDVRQV

Page 475 of 676

7-86
Driver Assistance System
[Turn off Smart Cruise Control when
\RXUYHKLFOHLVEHLQJWRZHG
[6PDUW&UXLVH&RQWUROPD\QRW
RSHUDWHSURSHUO\LILQWHUIHUHGE\
VWURQJHOHFWURPDJQHWLFZDYHV
[6PDUW&UXLVH&RQWUROPD\QRW
GHWHFWDQREVWDFOHLQIURQWDQGOHDG
WRDFROOLVLRQ$OZD\VORRNDKHDG
FDXWLRXVO\WRSUHYHQWXQH[SHFWHG
and sudden situations from
RFFXUULQJ
[9HKLFOHVPRYLQJLQIURQWRI\RXZLWK
DIUHTXHQWODQHFKDQJHPD\FDXVH
DGHOD\LQ6PDUW&UXLVH&RQWURO
UHDFWLRQRUPD\FDXVH6PDUW&UXLVH
&RQWUROWRUHDFWWRDYHKLFOHDFWXDOO\
LQDQDGMDFHQWODQH$OZD\VGULYH
FDXWLRXVO\WRSUHYHQWXQH[SHFWHG
and sudden situations from
RFFXUULQJ
[$OZD\VEHDZDUHRIWKHVXUURXQGLQJV
DQGGULYHVDIHO\HYHQWKRXJKD
warning message does not appear or
DQDXGLEOHZDUQLQJGRHVQRWVRXQG
[,IDQ\RWKHUV\VWHPTVZDUQLQJ
PHVVDJHLVGLVSOD\HGRUZDUQLQJ
VRXQGLVJHQHUDWHG6PDUW&UXLVH
&RQWUROZDUQLQJPHVVDJHPD\QRW
EHGLVSOD\HGDQGZDUQLQJVRXQGPD\
QRWEHJHQHUDWHG
[<RXPD\QRWKHDUWKHZDUQLQJVRXQG
RI)RUZDUG&ROOLVLRQ$YRLGDQFH
$VVLVWLIWKHVXUURXQGLQJLVQRLV\
[7KHYHKLFOHPDQXIDFWXUHULVQRW
UHVSRQVLEOHIRUDQ\WUDIILFYLRODWLRQ
RUDFFLGHQWVFDXVHGE\WKHGULYHU
[$OZD\VVHWWKHYHKLFOHVSHHGXQGHU
WKHVSHHGOLPLWLQ\RXUDUHD
[9HKLFOHGLVWDQFHDFFHOHUDWLRQDQG
UHDFWLRQVSHHGPD\FKDQJHLIWKH
GULYHUTVGULYLQJVW\OHFKDQJHV CAUTION
[7KHYHKLFOHPXVWEHGULYHQ
VXIILFLHQWO\WRUHIOHFWWKHDFWXDO
GULYLQJVW\OHRIWKHGULYHUVXFKDV
LQWHUYHKLFOHGLVWDQFHDFFHOHUDWLRQ
DQGUHDFWLRQVSHHG
[%DVHGRQ'ULYLQJVW\OHGRHVQRW
UHIOHFWZKHWKHUWKHGULYHUKDV
changed when determining the
GULYHU
VGULYLQJVW\OH
[,I\RXDUHGULYLQJLQVSHFLDO
FRQGLWLRQVVXFKDVVQRZUDLQIRJ
RUVWHHSVORSHVWKHYHKLFOHPD\QRW
EHGULYHQDFFRUGLQJWRWKHGULYHUTV
GULYLQJVW\OH
Information
[6PDUW&UXLVH&RQWUROPD\QRWRSHUDWH
IRUVHFRQGVDIWHUWKHYHKLFOHLV
started or the front view camera or
front radar is initialized.
[You may hear a sound when the brake
is controlled by Smart Cruise Control.
[Based on Driving Style may not reflect
the driver’s driving style or driving
conditions that affects driving safety.
[Based on Driving Style does not reflect
any other driving style other than
inter-vehicle distance, acceleration and
UHDFWLRQVSHHG

Page 476 of 676

7-87
07
Smart Cruise Control
0DOIXQFWLRQDQG/LPLWDWLRQV
Smart Cruise Control malfunction
ORS071121L
When Smart Cruise Control is not working
properly, the ‘Check Smart Cruise Control
System’ warning message will appear, and
the
warning light will illuminate on the
instrument cluster. If this occurs, have the
vehicle inspected by an authorized retailer
of Genesis Branded products.
Smart Cruise Control disabled
OTM070115N
When the front radar cover or sensor
is covered with snow, rain, or foreign
material, it can reduce the detecting
performance and temporarily limit or
disable Smart Cruise Control.
If this occurs the ‘Smart Cruise Control
disabled. Radar blocked’ warning
message will appear for a certain period
of time on the instrument cluster.
Smart Cruise Control will operate properly
when snow, rain or foreign material is
removed.
:$51,1*
(YHQWKRXJKWKHZDUQLQJPHVVDJHGRHV
QRWDSSHDURQWKHFOXVWHU6PDUW&UXLVH
&RQWUROPD\QRWSURSHUO\RSHUDWH
CAUTION
6PDUW&UXLVH&RQWUROPD\QRWSURSHUO\
RSHUDWHLQDQDUHD IRUH[DPSOHRSHQ
WHUUDLQ ZKHUHDQ\REMHFWVDUHQRW
GHWHFWHGDIWHUWXUQLQJ21WKHHQJLQH

Page:   < prev 1-10 11-20 21-30 31-40 next >