Side GENESIS G90 2023 Workshop Manual

5-17
05

[Ultra Wide Band supported smart
phone
- The digital key can be registered
if the smart phone is inside the
vehicle even without placing it
on the vehicle authentication pad
(wireless charging pad).
4. Press the ‘Save’ button from the
infotainment system screen. The
saving process begins automatically.

[When the digital key (smart phone)
is saved, a message appears on the
infotainment system screen.
Information

[If you want to register a digital key
(smart phone) again, refer to ‘How to
Delete Digital Key (Smart Phone)’ and
delete the digital key (smart phone)
before re-registering.

[During the digital key saving process,
the process will cancel when:
-The smart phone is removed from the
vehicle authentication pad (wireless
charging pad)
-The infotainment system screen is
changed
-The vehicle is turned off
-The gear is shifted

[The registering process does not start if
a smart key is not in the vehicle.

[Some smart phones may not start the
registering process depending on the
internal structure. Move the smart
phone to the left or right on the vehicle
authentication pad (wireless charger
pad) and try registering the smart
phone.
Using the digital key (smart phone)
Digital key touch control
The driver can lock or unlock the door by
placing the smart phone on the outside
door handle, and the vehicle can be
started by placing the smart phone on
the vehicle authentication pad (wireless
charging pad).
Digital key close proximity control

[If you have the smart phone in
possession, the doors can be locked
or unlocked without touching the
smart phone to the door handle, but
by touching the door lock/unlock
sensor (engraved part) on the door
handle. Also, the vehicle can be
started by pressing the Engine Start/
Stop button without placing the smart
phone on the vehicle authentication
pad (wireless charging pad).

[When the smart phone and vehicle is
connected by Bluetooth, the Remote
Start, Door Lock/Unlock, and Panic
functions are available using the
App provided by the smart phone
manufacturer.
Information

[The function is only available for Ultra
Wide Ban supported smart phone
digital keys. To use the function, the
smart phone’s Bluetooth must be
activated.

[The necessary distance between the
smart phone and vehicle for Bluetooth
connection may vary depending on the
surroundings of the vehicle and smart
phone.

5-18
Convenience Features
Locking places the digital key (smart
phone)

[Ultra Wide Band unsupported smart
phone
ORS051009
A : Door handle authentication pad
B : NFC antenna (Backside of the smart phone) (The
antenna position differs depending on models.)
- The door will lock or unlock by
touching the registered digital
key (card key) NFC antenna to the
driver’s or passenger’s door handle
authentication pad
A for more than
2 seconds.
- If the Two Press Unlock feature
is set, only the driver’s door pops
out and unlocks when the digital
key (smart phone) is placed on the
driver’s door handle authentication
pad
A. Place the digital key (smart
phone) on the driver’s door handle
authentication pad once more
within 4 seconds to unlock all doors.
[Ultra Wide Band supported smart
phone
- If you touch the door lock/unlock
sensor (engraved part) on the
door handle with the smart phone
in possession, the door locks or
unlocks.
- If you approach the front door
handle with the smart phone
in possession when ‘On driver
approach’ is set, the door unlocks
automatically.

[After unlocking the doors, the doors
will automatically re-lock after 30
seconds unless a door is opened.

[If the smart phone digital key does
not operate, try again after moving
the smart phone away from the door
handle authentication pad (more than
4 in. (0.1 m)).
Information

[You cannot lock your vehicle using the
digital key (smart phone) if any of the
following occurs:
-The smart key is in the vehicle.
-The Engine Start/Stop button is in
WKH$&&RU21SRVLWLRQ
-Any of the doors, hood, or trunk are
open.

[The door may not unlock automatically
if you stay near the vehicle for several
minutes with the Ultra Wide Band
supported smart phone in possession.

[If the smart phone is kept in the back
pocket or bag, it may cause poor
Bluetooth connection, or the door lock/
unlock or vehicle start-up operation my
be delayed.

5-19
05
Starting the vehicle

[Ultra Wide Band unsupported smart
phone
- After placing your registered digital
key (smart phone) on the vehicle
authentication pad (wireless
charging pad), depress the brake
pedal and press the Engine Start/
Stop button.

[Ultra Wide Band supported smart
phone
- With the smart phone inside the
vehicle, depress the brake pedal
and press the Engine Start/Stop
button.
- To start the vehicle remotely, use
the App provided by the smart
phone manufacturer to lock the
vehicle with the door lock button,
and press the remote start button
within 4 seconds.
The vehicle starts and the hazard
warning lights blink.
- Press the remote start button again
to turn off the vehicle.
After starting the vehicle, the digital key
(smart phone ) may be removed from
the vehicle authentication pad (wireless
charging pad). Information
If a shared digital key (smart phone) is
used for the first time, the activating time
may take longer.

[Place the shared digital key
(smart phone) on the door handle
authentication pad until the vehicle
door lock/unlock activates.

[If a shared digital key (smart phone) is
first used on the vehicle authentication
pad (wireless charger pad), the initial
start of the vehicle may fail.

[If the door lock/unlock is activated
once with the shared digital key (smart
phone) or the vehicle is started with
the digital key (smart phone) on the
vehicle authentication pad, the digital
key (smart phone) will be registered in
the vehicle.

5-23
05
Using the digital key (card key)
The driver can lock or unlock the door by
placing the card key on the outside door
handle, and the vehicle can be started
by placing the card key on the vehicle
authentication pad (wireless charging
pad).
ORS052259N
A : Door handle authentication pad,
B : Card key NFC antenna
Locking/Unlocking the doors

[If the driver places the digital
key (card key) on the driver’s
or passenger’s door handle
authentication pad
A for more than 2
seconds, the door will lock or unlock.

[If the Two Press Unlock feature is set,
only the driver’s door pops out and
unlocks when the digital key (card key)
is placed on the driver’s door handle
authentication pad. Hold the digital
key (card key) near the driver’s door
handle authentication pad once more
within 4 seconds to unlock all doors.

[After unlocking the doors, the doors
will automatically re-lock after 30
seconds unless a door is opened.
Information
You cannot lock your vehicle using
the digital key (card key) if any of the
following occurs:
-The smart key is in the vehicle.
-The Engine Start/Stop button is in the
$&&RU21SRVLWLRQ
-Any of the doors, hood, or trunk are
open.
Starting the vehicle
After placing your registered digital key
(card key) on the vehicle authentication
pad (wireless charging pad), depress the
brake pedal and press the Engine Start/
Stop button.
For more details on the basic way to
start the vehicle, refer to “Engine Start/
Stop Button” section in chapter 6.
WARNING
The vehicle can be started when the
registered card key is placed on the
vehicle authentication pad (wireless
charging pad). Therefore, do not leave
unsupervised children or people who
are not aware of the system since it
can result in serious injury or death. In
addition, always have the registered
card key with you to prevent vehicle
theft when leaving the vehicle.

5-26
Convenience Features
Vehicle personalization operation

[The personalization function linked
with digital key works when the profile
linked smart phone is placed on the
outside door handle authentication
pad to lock or unlock the doors.
The profile set by the digital key
can be changed manually from the
infotainment system.

[The personalization function using
the digital key can be operated
after linking the digital key in the
infotainment system profile menu.

[The personalization function works
only when the vehicle is OFF or when
the vehicle is started remotely. If the
vehicle is not started remotely, the
personalization function does not
work with the digital key. Information
User profile operation according to door
lock/unlock system is as follows:
ItemPersonalization
operation
Initial value Guest
Profile linked smart
phone keyLinked profile
Profile unlinked
smart phone key
Recently activated
profile NFC card key
Smart key

5-32
Convenience Features
Operating Door Locks from
Outside the Vehicle
Using smart key
To lock or unlock the doors from outside
the vehicle with the smart key button,
refer to the “Smart Key” section in
chapter 5.
ORS051015
ORS051005
:KHQ

5-34
Convenience Features
WARNING
Be careful not to get your fingers or
body caught between the door and
vehicle body when opening or closing
the door. It may lead to injury.
CAUTION

[The door might open again if not
properly closed.

[Do not leave the vehicle unlocked
for a long time. The battery may
discharge, and you will not be able
to open the other doors except the
driver’s door.

[Do not leave the mechanical key in
the vehicle. You will not be able to
open the doors in an emergency.
NOTICE

[The door handle may freeze during
winter. Tap the door handle lightly
or use other methods to warm the
KDQGOHDQGUHPRYHWKHLFH)RUPRUH
details, refer to “Removing Ice from
Door Handle” section in this chapter.

[Do not apply excessive force on the
door handle or use sharp tools to pop
out the door handle. It may damage
the door handle.
Information

[When the battery level is low, the
driver’s door will automatically shift to
emergency mode. If you pull the door
handle, you may hear a click noise.
This is a normal sound due to motor
operation.

[When the door handles do not operate
properly due to battery discharge or
other causes, you can manually pop
out the door handle by pressing the
front part of the door handle. When
it pops out, unlock the door with the
key and pull the handle to open the
door. For more details, refer to “Using
Mechanical Key” section in this
chapter.

[When you shift the gear to R (Reverse)
even when the doors are unlocked, the
outside door handle will return to its
original position.

[If you shift the gear to R (Reverse)
when using the automatic door lock
feature, the outside door handle returns
to its original position and the door will
be locked.

[When the vehicle speed is within 1.8
mph-9 mph (3 km/h-15 km/h) with the
doors unlocked, the doors will remain
unlocked, and only the door handle
will return to its original position. If
the vehicle is stopped in this condition,
the passenger will not have to unlock
the door. The door will be opened when
the door handle pops out by touching
the door lock/unlock sensor (engraved
part) on the outside door handle.

[When the outside door handle goes in
and pops out, a noise may sound from
inside the vehicle.

5-35
05
&DXWLRQVZKHQZDVKLQJWKHYHKLFOH
If touch sensors are equipped, an
unexpected warning may sound, and
the doors might lock or unlock when the
smart key is within the detectable range
and the outside door handle is wet.

[Conditions when using the automatic
car wash
- Prior to wash, keep the Engine
Start/Stop button in ACC or ON
position, stay in N (Neutral) and
enter the automatic car wash. For
details of staying in N (Neutral),
refer to “To Stay in N (Neutral)”
section in chapter 6.
- Enter the automatic car wash with
the doors locked and the outside
door handle in its original position.

[Conditions when self car washing
- Wash your car with the doors locked
and the outside door handle in its
original position.
- If any water or a rag is touching the
door handle lock/unlock sensor, the
door handle will pop out and the
door will be unlocked. To prevent
unintended operation of the door
handle sensor, keep the key over 6.5
ft. (2 m) away from the vehicle.
- Be careful to avoid theft of your
smart key during car wash.
- Make sure to keep your smart key
with you after car wash or keep
the key over 6.5 ft. (2 m) from the
vehicle.
- If an unexpected waring sounds
during car wash, keep the Engine
Start/Stop button in ACC or ON
position and leave the smart key
inside the vehicle.
Using mechanical key
ORS051019
ORS051260
A : Lock,
B : Unlock
Lock or unlock the door with the
mechanical key. Use the mechanical key
according to the following direction.
1. Pull the door handle while pressing
the front part of the outside door
handle M (front side of the vehicle).
Then remove the cover under the rear
part of the door handle.
2. Insert the key into the key hole N and
turn it to lock or unlock the door.
3. After unlocking with the mechanical
key, remove the key.
4. Release the door handle.
5. Press the front part of the door handle
again to manually pop out the handle,
then pull it out to open the door.

5-36
Convenience Features
ORS051286
6. Reinstall the removed cover.
When the door handle or keyhole
freezes, lightly tap or indirectly warm it
(for example, hand temperature, etc.) to
remove ice.
For more details, refer to “Removing
Ice from Door Handle” section in this
chapter.
Locking and unlocking the door multiple
times with the key or lock button or
switch may engage the protection circuit
and temporarily disable the lock/unlock
function. When you exit the vehicle,
engage the parking brake, turn the
engine off, close all windows and lock
the doors.
NOTICE
Do not apply excessive force on the
door and door handle. It may damage
the door and door handle.
Removing ice from door handle
Inner part of the door handle may freeze
during cold winter. Tap the door handle
with the palm side of the fist to remove
the ice.
Follow the instructions below to remove
the ice from the door handle.
ORS051246
1. Tap around the door handle with the
palm side of your fist to remove the
ice inside the door handle.
2. Unlock the door and see if the door
handle pops out. If the handle does
not pop out, continue tapping around
the handle and remove more ice.
3. Hold the door handle, and open and
close the door multiple times to
remove the remaining ice.
CAUTION

[Do not tap the vehicle while wearing
accessories or carrying other objects.
It may damage the painting.

[Do not tap the vehicle with tools
or with excessive force. Vehicle
body may be caved. Tap it with the
strength when knocking on the door.

5-38
Convenience Features
Operating Door Locks from
Inside the Vehicle
Using the door open button
ORS051021
Press the door open button from inside
the vehicle to open the door.

[Always close and lock the doors when
the vehicle is moving. Locking the
doors prevent others from entering
the vehicle while the vehicle is
stopped or moving slowly.

[If the smart key is in the vehicle
and either front door is opened, the
doors will not lock even though the
door lock button on the smart key or
central door lock switch is pressed.
NOTICE

[Do not open the door excessively
multiple times using the door open
button. It may engage the protection
circuit and temporarily disable the
button.

[If equipped with the Easy Close
feature, the door will open about 7.9
in. (20 cm). Check for any obstacles
before opening the door.
WARNING
Only open the door with the door open
button when the vehicle has completely
stopped.
The door may open while the vehicle is
in motion if you press the button.
Opening the door manually
ORS051026
If the door does not open with the door
open button due to battery discharge or
vehicle breakdown, pull the emergency
open lever under the door pocket twice
to open the door. You may use the
emergency open lever even if there is no
problem with the door open button.
CAUTION
Do not apply excessive force on the
door, door handle and emergency open
lever to avoid damage.
Information
The door will open in the following
conditions by pulling the emergency open
lever only once.

[When the door emergency open lever is
already used once (for all doors)

[When the battery is low. (for driver
side door)

[When the mechanical key on the
driver’s door is used