display GENESIS G90 2023 Manual PDF

Page 429 of 676

7-40
Driver Assistance System
Collision warning
[Collision warning will operate when
the turn signal is turned on in the
direction of the detected vehicle.
[If ‘Warning Only’ is selected from the
Settings menu, the collision warning
will operate when your vehicle
approaches the lane the blind spot
vehicle is detected.
[To warn the driver of a collision, the
warning light on the side view mirror
and head-up display (if equipped) will
blink. At the same time, an audible
warning will sound and the steering
wheel will vibrate.
[When the turn signal is turned off or
you move away from the lane, the
collision warning will be canceled and
Blind-Spot Collision-Avoidance Assist
will return to vehicle detection state.
:$51,1*
[The detecting range of the front
corner radar or rear corner radar
LVGHWHUPLQHGE\DVWDQGDUGURDG
ZLGWKWKHUHIRUHRQDQDUURZURDG
%OLQG6SRW&ROOLVLRQ$YRLGDQFH
$VVLVWPD\GHWHFWRWKHUYHKLFOHVLQ
WKHQH[WQH[WODQHDQGZDUQ\RX,Q
FRQWUDVWRQDZLGHURDG%OLQG6SRW
&ROOLVLRQ$YRLGDQFH$VVLVWPD\QRW
EHDEOHWRGHWHFWDYHKLFOHGULYLQJLQ
WKHQH[WODQHDQGPD\QRWZDUQ\RX
[:KHQWKHKD]DUGZDUQLQJIODVKHULV
RQWKHFROOLVLRQZDUQLQJE\WKHWXUQ
VLJQDOZLOOQRWRSHUDWH
Collision-Avoidance Assist (while
driving)
ORS071114L
[To warn the driver of a collision, the
warning light on the side view mirror
will blink and a warning message will
appear on the instrument cluster. At
the same time, an audible warning will
sound, warning light on the head-up
display (if equipped) will blink and the
steering wheel will vibrate.
[Steering will be assisted to help
prevent collision with the vehicle in
the blind spot area.
[Blind-Spot Collision-Avoidance Assist
will operate when your vehicle speed
is between 40-87 mph (60-140 km/h)
and both lane markings of the driving
lane are detected.

Page 430 of 676

7-41
07
CAUTION
[7KHVWHHULQJZKHHOPD\WXUQ
DXWRPDWLFDOO\ZKHQHPHUJHQF\
VWHHULQJLVRSHUDWLQJ
[(PHUJHQF\VWHHULQJZLOO
DXWRPDWLFDOO\FDQFHOZKHQULVN
IDFWRUVGLVDSSHDU,IQHFHVVDU\WKH
GULYHUPXVWVWHHUWKHYHKLFOH
[(PHUJHQF\VWHHULQJPD\QRWRSHUDWH
RUPD\FDQFHOGXULQJRSHUDWLRQLI
the steering wheel is held tight or
VWHHUHGLQWKHRSSRVLWHGLUHFWLRQ
[:KHQVWHHULQJLVDVVLVWHGWRDYRLG
FROOLVLRQZLWKDYHKLFOHSHGHVWULDQ
DQGF\FOLVW&ROOLVLRQ$YRLGDQFH
$VVLVWZLOOEHFDQFHOHGLIFROOLVLRQV
ZLWKRWKHUREMHFWV YHKLFOHV
SHGHVWULDQVRUF\FOLVWV DUH
H[SHFWHG
[&ROOLVLRQ$YRLGDQFH$VVLVWPD\QRW
RSHUDWHLIVSDFHWRDYRLGFROOLVLRQLQ
WKHGULYLQJODQHLVLQVXIILFLHQW
Collision-avoidance assist (while
departing)
ORS071115L
[To warn the driver of a collision, the
warning light on the side view mirror
will blink and a warning message will
appear on the instrument cluster. At
the same time, an audible warning will
sound, warning light on the head-up
display (if equipped) will blink and the
steering wheel will vibrate.
[Emergency braking will be assisted to
help prevent collision with the vehicle
in the blind spot area.
[Blind-Spot Collision-Avoidance Assist
will operate when your vehicle speed
is below 2 mph (3 km/h) and the
speed of the vehicle in the blind spot
area is above 3 mph (5 km/h).

Page 448 of 676

7-59
07
ORS072262N
3. The set speed limit will be displayed
on the cluster.
If you would like to drive over the
preset speed limit, depress the
accelerator pedal beyond the pressure
point to activate the kickdown
mechanism.
The set speed limit will blink and
chime will sound until you return the
vehicle speed within the speed limit.
Information
[:KHQWKHDFFHOHUDWRUSHGDOLVQRW
GHSUHVVHGEH\RQGWKHSUHVVXUHSRLQW
YHKLFOHVSHHGZLOOPDLQWDLQZLWKLQWKH
VSHHGOLPLW
[A clicking sound may be heard from
the kickdown mechanism when the
DFFHOHUDWRUSHGDOLVGHSUHVVHGEH\RQG
WKHSUHVVXUHSRLQW
Temporarily pausing Manual Speed
Limit Assist
ORS071027
Press the switch to temporarily
pause the set speed limit. The set speed
limit will turn off but the Speed Limit
(
) indicator will stay on.

Page 452 of 676

7-63
07
Displaying speed limit
ORS072090N
Speed limit information is displayed on
the instrument cluster.
Information
[,IVSHHGOLPLWLQIRUPDWLRQRIWKHURDG
cannot be recognized, '---' sign will be
GLVSOD\HG5HIHUWR/LPLWDWLRQVRI
,QWHOOLJHQW6SHHG/LPLW$VVLVWLIWKH
road signs are difficult to recognize.
[,QWHOOLJHQW6SHHG/LPLW$VVLVWSURYLGHV
additional road sign information in
DGGLWLRQWRVSHHGOLPLW7KHDGGLWLRQDO
URDGVLJQLQIRUPDWLRQSURYLGHGPD\
vary according to your country.
[The images and colors in the
instrument cluster may differ
GHSHQGLQJRQWKHFOXVWHUW\SHRUWKHPH
selected from the settings menu.
Warning overspeed
ORS072091N
When driving at a speed higher than the
displayed speed limit, the speed limit is
displayed in red.
Changing set speed
ORS072151NORS072152N
If the speed limit of the road changes
during the operation of Manual Speed
Limit Assist or Smart Cruise Control, an
arrow in the direction of up or down is
displayed to inform the driver that the set
speed needs to be changed. At this time,
the driver can change the set speed
according to the speed limit by using the
+ or – switch on the steering wheel.

Page 463 of 676

7-74
Driver Assistance System
Blind-Spot View Monitor
2SHUDWLQJFRQGLWLRQV
When the left or right side turn signal
turns on, the image in that direction is
displayed on the instrument cluster.
Off conditions
[When the turn signal turns off, the
image on the instrument cluster will
turn off.
[When the hazard warning flasher
is on, Blind-Spot View Monitor will
turn off, regardless of the turn signal
status.
[When other important warning is
displayed on the instrument cluster,
Blind-Spot View Monitor may turn off.
%OLQG6SRW9LHZ0RQLWRU
0DOIXQFWLRQ
When Blind-Spot View Monitor is not
working properly, or the cluster display
flickers, or the camera image does
not display properly, have the vehicle
inspected by an authorized retailer of
Genesis Brand products.
:$51,1*
[7KHLPDJHVKRZQRQWKHFOXVWHUPD\
differ from the actual distance of the
REMHFW0DNHVXUHWRGLUHFWO\FKHFN
WKHYHKLFOH
VVXUURXQGLQJVIRUVDIHW\
[$OZD\VNHHSWKHFDPHUDOHQVFOHDQ
,IWKHOHQVLVFRYHUHGZLWKIRUHLJQ
PDWHULDOLWPD\DGYHUVHO\DIIHFW
FDPHUDSHUIRUPDQFHDQG%OLQG
6SRW9LHZ0RQLWRUPD\QRWRSHUDWH
SURSHUO\

Page 470 of 676

7-81
07
Turning off Smart Cruise Control
ORS071025
Press the Driving Assist button to turn
Smart Cruise Control off.
Information
,I\RXUYHKLFOHLVHTXLSSHGZLWK0DQXDO
6SHHG/LPLW$VVLVWSUHVVDQGKROGWKH
Driving Assist button to turn off Smart
&UXLVH&RQWURO+RZHYHU0DQXDO6SHHG
Limit Assist will turn on.
CAUTION
'RQRWXVHWKHVZLWFKHVDQGEXWWRQV
DWWKHVDPHWLPH6PDUW&UXLVH&RQWURO
PD\QRWRSHUDWHSURSHUO\
Displaying operating status
You can see the status of the Smart
Cruise Control operation in the Driving
Assist view on the cluster. Refer to “View
Modes” section in chapter 4.
Smart Cruise Control will be displayed
as below depending on the status of the
function.
ORS072145N
A: Operating,
B: Temporarily canceled
[When operating
(1) Whether there is a vehicle ahead
and the selected distance level
(2) Set speed
(3) Whether there is a vehicle ahead
and the target vehicle distance
[When temporarily canceled
(1) Your vehicle (shaded)
(2) Previous set speed (shaded)
(3) Vehicle ahead and distance level
(shaded)

Page 472 of 676

7-83
07
Based on Driving Style operation
ORS071094LORS072148N
When Based on Driving Style is
operating, ‘Driving Style Adaptive SCC’
message will appear on the cluster for
2 seconds, and the distance level and
target distance will be displayed based
on the driving style.
Temporarily cancelling Smart Cruise
Control
ORS071118L
Smart Cruise Control will be temporarily
canceled automatically when:
[The vehicle speed is above 130 mph
(210 km/h)
[The vehicle is stopped for a certain
period of time
[The accelerator pedal is continuously
depressed for a certain period of time
[The conditions for Smart Cruise
Control to operate is not satisfied
If Smart Cruise Control is temporarily
canceled automatically, the ‘Smart
Cruise Control deactivated’ warning
message will appear on the cluster, and
an audible warning will sound to warn
the driver.
Information
,I6PDUW&UXLVH&RQWUROLVWHPSRUDULO\
canceled while the vehicle is at a
standstill with the function activated,
(3% (OHFWURQLF3DUNLQJ%UDNH PD\EH
DSSOLHG
:$51,1*
When Smart Cruise Control is
WHPSRUDULO\FDQFHOHGGLVWDQFHZLWKWKH
IURQWYHKLFOHZLOOQRWEHPDLQWDLQHG
$OZD\VKDYH\RXUH\HVRQWKHURDG
ZKLOHGULYLQJDQGLIQHFHVVDU\GHSUHVV
WKHEUDNHSHGDOWRUHGXFH\RXUGULYLQJ
speed in order to maintain a safe
GLVWDQFH

Page 498 of 676

7-109
07
ORS071076
Driving to one side within lane
When vehicle speed is above 40 mph (60
km/h), if a detected vehicle around you is
driving at a close distance, your vehicle
will control steering in the opposite
direction of the vehicle to assist in safe
driving. If there a detected vehicle in
both sides of the lane that are driving
close to you, the function will not veer to
the opposite side of the lane.
+LJKZD\'ULYLQJ$VVLVWVWDQGE\
When Smart Cruise Control is
temporarily canceled while Highway
Driving Assist is operating, Highway
Driving Assist will be in the standby state.
At this time, Lane Following Assist will
operate properly.
Information
['ULYLQJ6SHHG/LPLWKHOSV\RXGULYH
EHORZPSK NPK $WWKLVWLPH
the vehicle decelerates due to the
vehicle ahead. After the vehicle has
decelerated, it cannot automatically
accelerate.
['ULYLQJ6SHHG/LPLWZLOOFDQFHOLQWKH
following circumstances:
-When the driver grabs the steering
wheel again
-When the driver turns on Lane
)ROORZLQJ$VVLVWE\SUHVVLQJWKH/DQH
Driving Assist button
-When +, -,
switch or button is
RSHUDWHGRUWKHDFFHOHUDWRUSHGDORU
WKHEUDNHSHGDOLVGHSUHVVHG
Highway Lane Change Assist
'LVSOD\LQJRSHUDWLQJVWDWXV
You can see the status of the Highway Lane
Change Assist operation in the Driving
Assist view on the cluster. Refer to “View
Modes” section in chapter 4.
Highway Lane Change Assist function
will be displayed as below depending on
the status of the function.

Page 499 of 676

7-110
Driver Assistance System
ORS072093N
A: Ready/Operating,
B: Standby/Canceled
(1) Highway Lane Change Assist
indicator
[Green on : Ready state
[Green blink : Operating state
[Grey on : Standby state
[ White blink : Canceled state
(display only a certain time)
(2) Green lane line
The lane line is displayed same as
the Highway Lane Change Assist
indicator (1). However, if the function
is on standby, it displays whether the
lane line is detected.
(3) Green arrow and shade
The green arrow is displayed when a
certain amount of time has passed
after the function has started
operating, and until the lane change
has completed.
(4) Message
[Message is displayed when the
function does not operate even
though the turn signal is used.
[Message is displayed when
the function is canceled while
operating.
7RWXUQRQ+LJKZD\/DQH&KDQJH$VVLVW
Highway Lane Change Assist function
will turn on when the following
conditions are satisfied.
[The Driving Assist button or Lane
Driving Assist button is used to turn
on Highway Driving Assist.
+LJKZD\/DQH&KDQJH$VVLVWUHDG\WR
RSHUDWH
While Highway Lane Change Assist
function is on, the function will be
ready to operate when all the following
conditions are satisfied:
[Highway Driving Assist is operating
[Lane Following Assist is operating
[A vehicle in the rear area of your
vehicle is detected more than once
after the engine is turned on
[Your vehicle speed is above 50 mph
(80 km/h)
[Hands-off warning is not displayed on
the cluster
[Hazard warning flasher is off

Page 506 of 676

7-117
07
Camera settings
ORS072257N
[You can change Surround View
Monitor ‘Display Contents’ or ‘Display
Settings’ by touching the setup icon
(
) on the screen while Surround
View Monitor is operating, or selecting
S'ULYHU$VVLVWDQFH

Page:   < prev 1-10 ... 31-40 41-50 51-60 61-70 71-80 81-90 91-100 next >