sensor GENESIS GV60 2023 Owner's Manual

5-29
05

[When the vehicle entry with face
recognition is disabled, touching
the sensor on the outer door handle
will not operate the face recognition
camera. It is activated automatically
when the face is registered.

[If you have left your smart key or
digital key in your vehicle and locked
the vehicle door with Face Connect,
keep the smart key out of sight to
prevent theft.
WARNING
Do not register a child’s face on the
vehicle as unexpected accidents may
occur.
When Purchasing a Used Vehicle
If you purchase a used vehicle, you
should confirm and delete all registered
face in Driver 1 and Driver 2 profile.
If a face is registered, the message
“Biometric authentication active”
appears on the instrument cluster once
when the vehicle is turned on while the
doors are unlocked.
Legal Compliance
This system uses facial recognition and
authentication which may be considered
"biometrics" under law. Use of this
system consents to the collection,
use, and storage of your data for the
disclosed activities. (By setting your
Facial Recognition Profile, you consent to
using facial recognition for locking and
unlocking the vehicle.) We will only use
or share your data as needed for system
use, maintenance, and storage. Stored
data cannot be converted into your
facial image. You may delete your facial
recognition data at any time.

5-30
Convenience Features
Fingerprint authentication system allows
the driver to have access to personal
information, unlock profile and exit valet
mode with a enrolled fingerprint.
Fingerprint Authentication
System Settings
To use the system, the driver’s fingerprint
should be enrolled in the driver’s profile.
The drivers can set or delete their
fingerprint through the infotainment
system. Follow the following procedure.
Enrolling fingerprint
OJWEV051012 [A] : Fingerprint sensor
1. Turn on the vehicle.
2. 6HOHFW
S6HWXS

5-31
05
CAUTION
Do not participate in duplicating your
fingerprint with anyone.
NOTICE
Touch the fingerprint authentication
sensor gently. Fingerprint
authentication attempts with excessive
force may fail.
Fingerprint Authentication
System Operation
Touch control
The convenient features such as personal
information access, profile unlock, and
valet mode exit are available with the
fingerprint authentication system.
When the fingerprint shape appears
on the infotainment system screen,
you should place your finger on the
recognition sensor in the vehicle
according to the instruction message for
authorization and then you can operate
the linked features without entering the
password.
If the fingerprint authentication system
does not work, pull your finger away
from the fingerprint authentication
sensor and then try again.
Fingerprint linked features can be turned
on or off from the Settings menu. Select:

[
S6HWXS

5-32
Convenience Features
Limitations of the System

[Fingerprint authentication system
may not work when:
- Trying to authorize with
unregistered fingerprint.
- Not touching the center of
fingerprint authentication sensor.
- Any water or substances is on your
finger or the sensor.
- The film on the sensor is not
removed.
- The registered fingerprint is
damaged or swollen.
- The hand is overly dry.
- The sensor is touched shortly.

[If fingerprint authentication fails
over 5 consecutive times, fingerprint
recognition is temporarily restricted.
You should try it later or try other
methods such as inputting your
password.

[When you visit an authorized retailer
of Genesis Branded products to repair
parts due to fingerprint authorization
system or related part failure, your
registered fingerprint might be
deleted. Have your smart key when
you visit an authorized retailer of
Genesis Branded products.

[You cannot use the fingerprint sensor
when the vehicle is discharged.

[If you turn the vehicle on or off
while proceeding the fingerprint
authorization, the process will not be
complete. WARNING
Do not enroll children’s fingerprints in
the vehicle.
If you enroll children’s fingerprints and
leave them in the vehicle, unexpected
accidents may occur.
Used vehicle
When purchasing a used vehicle
If you purchase a used vehicle, you
should confirm and delete all of the
enrolled fingerprints in Driver 1 and
Driver 2 profile.

5-36
Convenience Features
Operating Door Locks from
Outside the Vehicle
Mechanical key
OJWEV051015
Press the front part (1) of the door
handle to pull out the rear part of the
door handle. While pressing the front
part of the door handle, insert (2) the
mechanical key to the lock.
To unlock the door, turn the key toward
the front (A) of the vehicle. To lock, turn
the key toward the rear (B) of the vehicle.
NOTICE
Do not apply excessive force on the
door and door handle. It may damage
the door and door handle.
Information
:KHQWKHNH\KROHIUHH]HVDQGGRHVQRW
open, lightly tap or indirectly warm (i.e.
hand temperature) the keyhole.
Smart key
„Lock
OJWEV051003
Touch the touch sensor on the front
outside door handle (the engraved part)
while carrying the Smart Key with you or
press the Door Lock button on the Smart
Key, all doors will lock.
„Unlock
OJWEV051003
Put your hand in the front outside door
handle while carrying the Smart Key with
you or press the Door Unlock button on
the Smart Key, only driver side door will
unlock. If you do the same action one
more, all the doors will unlock.
Once the doors are unlocked, they may
be opened by pulling the door handle.
When closing the door, push the door by
hand. Make sure that doors are closed
securely.
For more details, refer to “Smart Key” in
the previous pages.
DOOR LOCKS

5-37
05
Information

[During a car wash or rain, in order
to minimize unintentional operation
of the touch sensor, the touch sensor
may become insensitive. This is not a
malfunction.

[In cold and wet climates, door lock
and door mechanisms may not work
properly due to freezing conditions.

[,IWKHGRRULVORFNHGXQORFNHGPXOWLSOH
times in rapid succession with either
the vehicle key or door lock switch, the
system may stop operating temporarily
in order to protect the circuit and
prevent damage to system components.
Operating Door Locks from
Inside the Vehicle
With the door handle
OJWEV051016
Front door
If the inner door handle is pulled when
the door is locked, the door will unlock
and open.
Rear door
If the inner door handle is pulled once
when the door is locked, the door will
unlock. If the inner door handle is pulled
once more, the door will open.
Information
If a power door lock ever fails to function
while you are in the vehicle try one or
more of the following techniques to exit:

[Operate the door unlock feature
repeatedly (both electronic and
manual) while simultaneously pulling
on the door handle.

[Operate the other door locks and
handles, front and rear.

[Lower a front window and use the
mechanical key to unlock the door from
outside.

5-44
Convenience Features
This system helps to protect your vehicle
and valuables. The horn will sound and
the hazard warning lights will blink
continuously if any of the following
occur:

[A door is opened without using the
smart key.

[The liftgate is opened without using
the smart key.

[The vehicle hood is opened.
The alarm continues for 30 seconds, then
the system resets. To turn off the alarm,
unlock the doors with the smart key.
The Theft Alarm System automatically
sets 30 seconds after you lock the
doors and the liftgate. For the system to
activate, you must lock the doors and
the liftgate from outside the vehicle with
the smart key or by touching the touch
sensor on the outside of the door handle
with the smart key in your possession.
The hazard warning lights will blink and
the chime will sound once to indicate the
system is armed.
Once the security system is set, opening
any door, the liftgate, or the hood
without using the smart key will cause
the alarm to activate.
The Theft Alarm System will not set if the
hood, the liftgate, or any door is not fully
closed. If the system will not set, check
the hood, the liftgate, or the doors are
fully closed.
Do not attempt to alter this system or
add other devices to it. Information

[Do not lock the doors until all
passengers have left the vehicle. If the
remaining passenger leaves the vehicle
when the system is armed, the alarm
will be activated.

[If the vehicle is not disarmed with the
smart key, open the doors by using the
mechanical key and start the vehicle by
GLUHFWO\SUHVVLQJWKH6WDUW6WRSEXWWRQ
with the smart key.

[If the system is disarmed by unlocking
the vehicle, but neither a door or the
liftgate is opened within 30 seconds, the
doors will relock and the system will
rearm automatically.
Information
OHI038181L
9HKLFOHVHTXLSSHGZLWKDWKHIWDODUP
system will have a label attached to the
vehicle with the following words:
1. :$51,1*
2. 6(&85,7<6<67(0
7+()7

5-46
Convenience Features
Information

[The second alert is available for
vehicles equipped with the ROA sensor.

[The second alert is activated only after
the prior activation of the first alert.

[Rear Occupant Alert also activates
when movement is detected in the cargo
area.

[ „Cluster

ôType A„Cluster

ôType B
OJWEV051293NOJWEV051078

[ „Steering wheel
OJWEV051078
If you do not want to use Rear
Occupant Alert, press the OK button
on the steering wheel when the first
alert is displayed on the cluster. Doing
so will deactivate the second alert one
time.

[If the vehicle is started remotely (if
equipped with Remote Start), inside
movement detection will stop.
Advanced Rear Occupant Alert
Precautions

[Make sure that all the windows are
closed. If the window is open, the
alert may operate by the sensor
detecting an unintended movement
(for example, wind or bugs).

[The alert may operate if movement
in the driver or passenger seat is
detected.

[If the doors are locked with a
passenger inside the vehicle, the alert
may operate.

[An alert can occur if the there is an
impact on the vehicle.

[If boxes or objects are stacked in the
vehicle, the system may not detect
passengers. Or, the alert may operate
if the boxes or objects fall off.

[The alert may operate when the
vehicle is pushed or shaken, or while
washed, or by surrounding noise or
vibration after the vehicle is locked.

[The alert may operate when there
are metallic or liquid objects in the
vehicle.

5-47
05
WARNING
Even if your vehicle is equipped with
Advanced Rear Occupant Alert (ROA),
always make sure to check the rear
seats or cargo area before you leave the
vehicle.
Advanced Rear Occupant Alert (ROA)
may not operate when:

[Movement does not continue for
a certain period of time or the
movement is small.

[A child is not seated in a child
restraint system.

[The detection signal is weak because
the signal is obscured by seat or
CRS(for example, child is restrained
in the forward-facing CRS).

[Movement is detected in areas other
than the rear seats.

[The rear passenger is covered with a
fabric containing metallic substance
such as a blanket.

[An object in the vehicle blocks the
sensor.

[The sensor is contaminated by
foreign material.

[An animal at the rear seat or luggage
compartment is not large enough to
be detected by the sensor or there is
hardly any movement.

[Attaching objects or modifying the
interior ceiling, or the interior ceiling
is deformed or damaged.

[There are electronic interference
around the vehicle.

[Other environmental reasons that
may affect the system.
Declaration of Conformity
The radio frequency components (ROA
Radar Sensor) complies:
- For USA
OANATEL323
- For Canada
OANATEL324

5-93
05
LIGHTING
Exterior Lights
Lighting control
To operate the lights, turn the knob at
the end of the control lever to one of the
following positions:
OJX1059057
1. OFF position
2. AUTO headlamp position
3. Parking lamp position
4. Headlamp position
Daytime Running Light (DRL)
The Daytime Running Lights (DRL) can
make it easier for others to see the front
of your vehicle during the day, especially
after dawn and before sunset.
The DRL system will turn the dedicated
lamp OFF when :

[The headlamps are ON.

[The parking brake is applied.

[The vehicle is turned off.
ORG3EV051070
AUTO headlamp position
The parking lamp and headlamp will
be turned ON or OFF automatically
depending on the amount of daylight as
measured by the ambient light sensor (1)
at the upper end of the windshield glass.
Even with the AUTO headlamp feature
in operation, it is recommended to
manually turn ON the headlamps when
driving at night or in a fog, driving in the
rain, or when you enter dark areas, such
as tunnels and parking facilities.