ignition GMC SIERRA 2008 Get To Know Guide

Getting to Know Your Sierra6
DIC Controls (if equipped)
The following DIC
controls are located on the left or
right side (depending on model) ofthe instrumentpanel cluster:
(Trip/Fuel):Press this button
to display the following trip and fuelinformation:
• Odometer
(Vehicle Information):Press this
button to display the following vehicleinformation:
• Oil Life
•Display Units (English/Metric)
• Tire Pressure (if equipped)
•Trailer Gain and Output (ifequipped)
• Engine Hours
• Tire Pressure System Programming
(if equipped)
• Remote Keyless Entry Programming
(Customization):Press this button
to scroll through the following customization features:
• Display Language
• Auto Door Lock
• Auto Door Unlock
• Remote Door Lock
• Remote Door Unlock
• Delay Door Lock
• Exit Lighting
• Approach Lighting
• Chime Volume
• Park Tilt Mirrors (if equipped)
• Easy Exit Seat (if equipped)
• Memory Seat Recall (if equipped)
(Set/Reset):Press this button to set
or reset DIC information while it is dis
played or to acknowledge a warning
message.
Customization Settings
To customize features:
1. With the vehicle in Park, turn on the
ignition.
2. Press the (Customization) button
to display available customizationfeatures.
3. With the desired customization
feature displayed, press the (Set/Reset) button to access thefeature settings.
4.Press the button to scroll through
the available settings.
5. With the desired setting displayed,
press the button to select it.
6. Press the button to scroll to the
next feature.
Sierra 2008 A 5/16/07 7:49 AM Page 6

7
7. To exit the Feature Settings menu,
press the button until EXIT
FEATURE SETTINGS is displayed
and then press the button; or
press the button or the button.
Warnings and Messages
The DIC provides a variety of vehicle
warning messages (depending onoptional equipment) if a problem is
sensed in a vehicle system. To acknowledge a message and clear it from the
display, press the (Set/Reset) button.Some urgent messages cannot be
cleared from the DIC display.
If you have a current OnStar subscrip
tion, and a warning message appears,you can press the OnStar button and
speak to an OnStar Advisor. In manyvehicles, OnStar Advisors can access
certain diagnostic information and cantell you how serious the problem is andwhat you should do about it.
See Section 3 of your Owner Manual.
Note: Your vehicle’s warnings and mes
sages provide critical information thatcan prevent damage to your vehicle.Review your Owner Manual to becomefamiliar with the information displayedand the action required.
Remote Keyless Entry
(if equipped)
SAFETY& SECURITY
The Remote
Keyless Entry (RKE)transmitter includes
the followingfunctions:
(Remote Vehicle Start)(if
equipped): This feature can be used tostart the engine from outside the vehicle.
(See Remote Vehicle Start.)
(Lock):Press this button to lock all
the doors. RKE feedback (light flashand/or horn chirp) can be programmedusing the DIC.
(Unlock):Press this button to unlock
the driver’s door. Press it again withinfive seconds to unlock all remainingdoors. RKE feedback (light flash) can
be programmed using the DIC.
(Vehicle Locator/Panic Alarm):Press this button to locate your vehicle.
The turn signal lamps will flash and thehorn will sound three times.
Press and hold the button to activate the
panic alarm. The turn signal lamps will
flash and the horn will sound for 30 seconds. Press the button again or turn theignition to Run to cancel the alarm.
See Section 2 of your Owner Manual.
Content TheftDeterrent System
(if equipped with RKE)
To arm the content theftdeterrent
alarmsystem, lock the doors using the
Remote Keyless Entry (RKE) transmit
ter. The security light on the instrument
panel cluster will flash for approximately
30 seconds to indicate the alarm is activated. To disarm the system, unlock the
doors using the RKE transmitter.
The alarm system will not be armed or
disarmed if the doors are locked orunlocked with a key or the manual
door lock.
See Section 2 of your Owner Manual.
Sierra 2008 A 5/16/07 8:39 AM Page 7

Getting to Know Your Sierra8
The following power seat controls are
located on the outboard side of thedriver and front passenger seats: Your vehicle may feature the OnStar
Safe & Sound Plan or the uplevelOnStar Directions & Connections Plan,with one year of OnStar service from thedate you purchased your new vehicle.
OnStar offers a variety of capabilities,
such as Remote Door Unlock, AutomaticAirbag Notification, and HandsFreeCalling. In addition, most vehicles canget driving directions using a system
called TurnbyTurn Navigation. OnStar
Advisors can send a planned route to
your vehicle and, as you approach aturn, instructions play over your vehiclespeakers. Press the OnStar button to
ask an OnStar Advisor about the service
plan you have or to upgrade your plan.
For more information, refer to your
OnStar Owner’s Guide, call 1888
4ONSTAR (18884667827), or visit
onstar.com.
See Section 2 of your Owner Manual
OnStar®(if equipped)
Power Seat Controls
(if equipped)
COMFORT
A
B
C
Power Seat: Use the horizontal control
(A) to move the seat forward/rearwardand up/down as well as to raise/lowerthe front or rear of the seat cushion.
Power Recline(if equipped): Use the
vertical control (B) to recline/raise theseatback.
Power Lumbar(if equipped): Use the
round control (C) to increase/decreaselumbar support and to raise/lower theposition of the support.
See Section 1 of your Owner Manual.
The following
heated seatcontrols arelocated on thefront doors:
(Heated
Seatback):
Press the top
button to turnon the heated seatback.
(Heated Seat/Seatback):Press the
bottom button to turn on the heated seatand seatback.
Continue to press the desired button to
cycle through the temperature settingsof High (three indicator lights), Medium(two indicator lights), Low (one indicator
light) and Off (all indicator lights are off).
Heated seat operation is canceled each
time the ignition is turned off.
See Section 1 of your Owner Manual.
Heated Seats (if equipped)
Sierra 2008 A 5/16/07 8:39 AM Page 8

9
Memory Settings (if equipped)
The memory buttons are located on the
driver’s door next to the heated seatcontrols. Settings can be programmed
for the driver’s seat, the outside mirrorsand the adjustable pedals (if equipped)for two drivers.
To save memory settings:
1. Adjust the driver’s seat, outside
mirrors and pedals to a comfortable
position.
2. Press and hold button 1 or 2 until two
beeps sound.
3. Repeat these steps for a second
driver using the other memory button.
To recall the settings, press memory
button 1 or 2 with the vehicle in Park. Ifthe Remote Keyless Entry transmitter is
used to enter the vehicle and the memory seat recall feature is on (see DriverInformation Center), the settings will be
recalled automatically.
Easy Exit Seat
The easy exit seat button is located
between the two memory buttons. Pressthe exit button, with the vehicle in Park,
to move the driver’s seat to the exitposition.
If the easy exit seat feature is on (see
Driver Information Center), automaticseat movement will occur when the keyis removed from the ignition.
See Section 1 of your Owner Manual.
The accelerator and brake pedals can
be adjusted to a comfortable and safeoperating position by using theadjustable pedals switch located on the
Adjustable Pedals (if equipped)
The automatic climate control system
maintains the desired individual temper
ature for the driver and front seat pas
senger. The system adjusts the airflow
mode, fan speed, air conditioning and
recirculation functions to reach the settemperature(s) as quickly as possible.
Automatic Operation
To set the automatic mode:
1. Press the AUTO button.
2. Set the driver’s and front passenger’s
temperature using the + or – temperature buttons.
Automatic Climate Controls
(if equipped)
instrument
panel belowthe climatecontrols.
Press the top
arrow on theswitch to movethe pedalsaway from youand the bottom arrow on the switch tomove the pedals toward you.
The pedals cannot be adjusted when the
vehicle is in Reverse or when cruisecontrol is activated.
See Section 2 of your Owner Manual.
Sierra 2008 A 5/16/07 7:49 AM Page 9

Getting to Know Your Sierra14
Rear Seat Audio and DVD Rear
Seat Entertainment Systems (if equipped)
Rear Seat Audio
The Rear Seat Audio (RSA) system
allows front seat and rear seat passen
gers to listen to different entertainmentsources at the same time using the rearseat controls and wired headphones(not supplied).
To select an entertainment source
(radio; CD; or DVD, if equipped), press
the SRCE (Source) button.
DVD Rear Seat Entertainment
The Rear Seat Entertainment (RSE)
system includes a CD/DVD player aspart of the front radio, a flipdown videoscreen, audio/video jacks, two wirelessheadphones, and a remote control.
To play a DVD:
1. Turn the ignition to the Accessory or
Run position.
2.Push the release button on the DVD
display console and pull down the
video screen.
3. Insert a DVD into the DVD slot in the
radio. It will turn on the video screenand begin playing automatically. It
may be necessary to press the Playpushbutton on the radio or the remotecontrol to start playing the movie ifthe DVD stops at a menu screen.
Audio Steering Wheel Controls
(if equipped)
The following audio controls are located
on the steering wheel:
+ – (Volume): Pull up the + or – button
to increase or decrease the volume.
(Next/Previous):Press the up or
down arrow to go to the next or previous
radio station stored as a favorite or,when a CD is playing, to the next orprevious track.
4. To listen to the DVD through the
vehicle speakers, press the DVD/CD
AUX button. Adjust volume using theradio volume control.
To listen to the DVD through the
headphones, select channel 1 and
push the power button on the head
phones. Adjust volume using theheadphone volume control.
5. To control DVD playback, use the
remote control or the front radiopushbuttons.
Parental Control
To enable the Parental Control feature to
gain the attention of rear passengers
using headphones, press and hold theradio power button for two seconds.
To turn off Parental Control, press
and hold the radio button again for twoseconds.
See Section 3 of your Owner Manual.
Note:Aim the remote control at the video
screen, not the DVD player, for properoperation.
Sierra 2008 A 5/16/07 7:49 AM Page 14

15
This feature allows you to start the
engine from outside the vehicle by usingthe Remote Keyless Entry (RKE) trans
mitter. The remote start capability must
be turned on using the Driver
Information Center.
The automatic climate control system
(ifequipped) will default to a heating
orcooling mode based on outside tem
perature, or the manual climate control
system will turn on at the same settingas when the vehicle was last turned off.
Heated/cooled seats (if equipped)willalso turn on based on outside
temperature.
Remote Vehicle Start
(if equipped)
CONVENIENCE
SRCE
(Source):
Press this
button to switch
between AM,FM, XM (ifequipped),
CD and AUX.
(Seek):Press this but
ton to go to thenext radio station.
(
Mute/Voice Recognition): Press
this button to mute the vehicle speakers.
Press and hold the button for one second to initiate navigation system voicerecognition or interact with the OnStarsystem.
See Section 3 of your Owner Manual.
Starting the Vehicle
To remote start the vehicle:
1. Aim the RKE transmitter at the vehi
cle. (Remote Vehicle Start transmitterrange is within approximately 200 feetof the vehicle.)
2. Press and release the (Lock)
button on the transmitter.
3. Immediately press and hold the
(Remote Vehicle Start) button forabout four seconds. When the park
ing lights flash, release the button.The engine will start and the parkinglamps will remain on. The engine will
continue running for 10 minutes.
4. Repeat these steps for a 10minute
time extension. Only two consecutiveremote starts are allowed.
When you enter the vehicle after a
remote start, the key must be inserted in
the ignition and turned to the Run position before driving.
Canceling a Remote Start
If you wish to turn off the engine instead
of driving after a remote start, performone of the following functions:
•Press and hold the button until the
parking lamps turn off.
• Press and release the Hazard
Warning Flashers button inside thevehicle. Press the button again to
turn off the flashers.
•Turn the key in the ignition switch to
the Run position and then off.
See Section 2 of your Owner Manual.
Note: The Remote Vehicle Start feature
will not operate if the key is in the igni
tion, the hood is open, or the CheckEngine light is illuminated on the instru
ment panel cluster.
Sierra 2008 A 5/16/07 7:49 AM Page 15

E85 is not yet available at all gas sta
tions. E85 holds less energy per gallonthan gasoline, so drivers will experiencelower miles per gallon and cruisingrange when running on E85.
See Section 5 of your Owner Manual.
23
Note: If your vehicle does not have the
yellow gas cap, do not use E85.
The Oil Life System calculates engine oil
life based on vehicle use and displays
CHANGE ENGINE OIL SOON on theDriver Information Center (DIC) when it’s
necessary to change your engine oil and
filter. The Oil Life System should bereset to 100% only following an oilchange.
To reset the Oil Life System:
1.Turn on the ignition.
2. Press the (Vehicle Information)
button until the DIC displays OILLIFE
REMAINING.
3.Press and hold the (Set/Reset)
button until 100% is displayed.
4. Turn off the ignition.
See Section 5 of your Owner Manual.
Resetting the Engine Oil Life
System
OWNER INFORMATION
Sierra Accessories
A variety of GM accessories, such as
running boards, ashtray and lighter
package, roof rack rails, and bed extenders, have been designed exclusivelyfor your Sierra to enhance its style and
functionality.
Accessories also are available for use
with the cargo management system,including an overhead rack, sliding
metal tool box, sliding metal bed divider,and sliding metal side storage boxes.
Visit www.gmc.com, or see your GMC
dealer for information about the avail
ability and installation of select Sierraaccessories.
Sierra 2008 A 5/16/07 7:50 AM Page 23