lights GMC SIERRA 2008 Get To Know Guide

Getting to Know Your Sierra4
Your vehicle’s instrument panel is
equipped with this cluster or one very
similar to it. The instrument clusterincludes these key features:
A. Oil Pressure Gauge (if equipped)B.Fuel Gauge*
C. Driver Information Center/Odometer
D. Tachometer
E. Speedometer
F. Engine Coolant Temperature GaugeG.Voltmeter (if equipped)
*Diesel Engine only: If ULTRALOW
SULFUR DIESELFUELONLY appears
on the fuel gauge, your vehicle isequipped with a Diesel Particulate
FilterEmissions System. Maintenance
messages may appear in your DriverInformation Center regarding thissystem. See your Diesel Engine OwnerManual for more information.
See Section 3 of your Owner Manual.
Note:The instrument cluster is designed
to let you know about many importantaspects of your vehicle’s operation. It is
important toread your Owner Manual
and become familiar with the informationbeing relayed to you by the lights,gauges and indicators, as well as whataction can be taken to ensure safetyandto prevent damage.
Diesel engine cluster shown.Instrument Panel Cluster
ABCEFGD
Sierra 2008 A 5/16/07 7:49 AM Page 4

5
Following are examples of symbols you
may find on your vehicle. It is importantto become familiar with them, as theyalert you to various vehicle operatingconditions.
Air Bag Readiness LightAir Conditioning (A/C)
Antilock Brake System Warning
Light
Brake System Warning Light
(Parking Brake Set)
Cruise Control Set LightFourWheel Drive Light
(Manual Transmission only)
HeadlampsHeated MirrorsMalfunction Indicator Lamp
(Check Engine Light)
Off
On/Off
On
Rear Window DefoggerSafety Belt Reminder LightSecurity Light
StabiliTrak Warning Light
Tire Pressure Warning Light
Tow/Haul Mode Light
Ultrasonic Rear Parking Assist
Voltmeter Operation
The voltmeter shows the condition of the
vehicle’s charging system. The systemis designed to regulate voltage output tohelp improve fuel economy and extendbattery life. Normal system operationreadings may fluctuate (as indicated bythe blue area in the illustration above)based on vehicle operation, includingthe number of electrical accessoriesbeing operated and engine speed.
See Section 3 of your Owner Manual.
Vehicle Symbols
Driver Information Center
Your vehicle’s Driver Information Center
(DIC) provides vehicle information, vehi
cle feature customization (if equipped),
and vehicle warning messages. The DICmessages will be shown on the instru
ment panel cluster display.
Sierra 2008 A 5/16/07 7:49 AM Page 5

Getting to Know Your Sierra8
The following power seat controls are
located on the outboard side of thedriver and front passenger seats: Your vehicle may feature the OnStar
Safe & Sound Plan or the uplevelOnStar Directions & Connections Plan,with one year of OnStar service from thedate you purchased your new vehicle.
OnStar offers a variety of capabilities,
such as Remote Door Unlock, AutomaticAirbag Notification, and HandsFreeCalling. In addition, most vehicles canget driving directions using a system
called TurnbyTurn Navigation. OnStar
Advisors can send a planned route to
your vehicle and, as you approach aturn, instructions play over your vehiclespeakers. Press the OnStar button to
ask an OnStar Advisor about the service
plan you have or to upgrade your plan.
For more information, refer to your
OnStar Owner’s Guide, call 1888
4ONSTAR (18884667827), or visit
onstar.com.
See Section 2 of your Owner Manual
OnStar®(if equipped)
Power Seat Controls
(if equipped)
COMFORT
A
B
C
Power Seat: Use the horizontal control
(A) to move the seat forward/rearwardand up/down as well as to raise/lowerthe front or rear of the seat cushion.
Power Recline(if equipped): Use the
vertical control (B) to recline/raise theseatback.
Power Lumbar(if equipped): Use the
round control (C) to increase/decreaselumbar support and to raise/lower theposition of the support.
See Section 1 of your Owner Manual.
The following
heated seatcontrols arelocated on thefront doors:
(Heated
Seatback):
Press the top
button to turnon the heated seatback.
(Heated Seat/Seatback):Press the
bottom button to turn on the heated seatand seatback.
Continue to press the desired button to
cycle through the temperature settingsof High (three indicator lights), Medium(two indicator lights), Low (one indicator
light) and Off (all indicator lights are off).
Heated seat operation is canceled each
time the ignition is turned off.
See Section 1 of your Owner Manual.
Heated Seats (if equipped)
Sierra 2008 A 5/16/07 8:39 AM Page 8

15
This feature allows you to start the
engine from outside the vehicle by usingthe Remote Keyless Entry (RKE) trans
mitter. The remote start capability must
be turned on using the Driver
Information Center.
The automatic climate control system
(ifequipped) will default to a heating
orcooling mode based on outside tem
perature, or the manual climate control
system will turn on at the same settingas when the vehicle was last turned off.
Heated/cooled seats (if equipped)willalso turn on based on outside
temperature.
Remote Vehicle Start
(if equipped)
CONVENIENCE
SRCE
(Source):
Press this
button to switch
between AM,FM, XM (ifequipped),
CD and AUX.
(Seek):Press this but
ton to go to thenext radio station.
(
Mute/Voice Recognition): Press
this button to mute the vehicle speakers.
Press and hold the button for one second to initiate navigation system voicerecognition or interact with the OnStarsystem.
See Section 3 of your Owner Manual.
Starting the Vehicle
To remote start the vehicle:
1. Aim the RKE transmitter at the vehi
cle. (Remote Vehicle Start transmitterrange is within approximately 200 feetof the vehicle.)
2. Press and release the (Lock)
button on the transmitter.
3. Immediately press and hold the
(Remote Vehicle Start) button forabout four seconds. When the park
ing lights flash, release the button.The engine will start and the parkinglamps will remain on. The engine will
continue running for 10 minutes.
4. Repeat these steps for a 10minute
time extension. Only two consecutiveremote starts are allowed.
When you enter the vehicle after a
remote start, the key must be inserted in
the ignition and turned to the Run position before driving.
Canceling a Remote Start
If you wish to turn off the engine instead
of driving after a remote start, performone of the following functions:
•Press and hold the button until the
parking lamps turn off.
• Press and release the Hazard
Warning Flashers button inside thevehicle. Press the button again to
turn off the flashers.
•Turn the key in the ignition switch to
the Run position and then off.
See Section 2 of your Owner Manual.
Note: The Remote Vehicle Start feature
will not operate if the key is in the igni
tion, the hood is open, or the CheckEngine light is illuminated on the instru
ment panel cluster.
Sierra 2008 A 5/16/07 7:49 AM Page 15

17
Heated Windshield Washer
Fluid (if equipped)
Press the (Heated Washer Fluid)
button, located below the climate controls on the instrument panel, to sprayheated washer fluid on the windshield.This will help to clear ice, tree sap or
bugs from the windshield. A light on theswitch will flash while the washer fluid is
heated, which may take up to 40 sec
onds. The wipers will automatically turnon for four heated wash cycles or untilthe button is pressed again.
See Section 3 of your Owner Manual.
Your vehicle is equipped with an
Automatic Headlamp System, which
turns on the Daytime Running Lamps
(DRL) during the day and the headlamps and other exterior lamps at nightor when necessary.
The system uses a light sensor, located
on top of the instrument panel, to determine light conditions. For proper systemoperation, avoid placing any objects on
or near the sensor.
The exterior and interior lamp controls
are located on the instrument panel tothe left of the steering wheel.
Automatic Headlamp System
and Interior Lamps
Exterior Lamp Controls
(On/Off):
Turn the knob to this posi
tion to turn off the Automatic Headlamp
System and DRL. Turn the knob to thisposition again to turn them on.
AUTO (Automatic):This position turns
on the Automatic Headlamp System
and DRL.
(Parking Lamps):This position
turns on the parking lamps and taillamps.
(Headlamps):This position turns
on the headlamps and other exteriorlamps.
(Fog Lamps)(if equipped): Press
this button to turn the fog lamps onoroff.
Interior Lamp Controls
(Instrument Panel Brightness):
Turn this popout knob to adjust the
brightness of the instrument panel lights.
(Dome Lamp Override):Press in
this button to turn the dome lamps
off when a door is open. Press the but
ton again to have the dome lamps turn
on automatically when a door is open.
See Section 3 of your Owner Manual.
Extended Cab
The power sunroof
switch, located onthe
overhead console,includes these features:
Vent:From the closed
position, press and holdthe rear of the switch tovent the sunroof.
Sunroof (if equipped)
Sierra 2008 A 5/16/07 7:50 AM Page 17

the rear window.
Press and hold thefront of the switchto close the rear
window.
See Section 1 of your
Owner Manual.
Getting to Know Your Sierra18
Open:From the vent position, press and
hold the rear of the switch to open thesunroof.
Close:Press and hold the front of the
switch to close the sunroof.
Crew Cab
The power
sunroof switches, located onthe overheadconsole,include these features:
Vent:From the closed position, press
the rear of the passengerside switch tovent the sunroof.
To close the sunroof, press and hold the
front of the passengerside switch.
ManualOpen/ManualClose:To partial
ly open the sunroof, press and hold therear of the driverside switch until thesunroof reaches the desired position.Press and hold the front of the driverside switch to close it.
ExpressOpen/ExpressClose:To
expressopen the sunroof, fully press
and release the rear of the driversideswitch. Fully press and release the frontof the driverside switch to expressclose the sunroof. Press the switchagain to stop it.
See Section 2 of your Owner Manual.
Power Sliding Rear Window
(if equipped)
The power sliding rear window switch is
located on the overhead console. Pressand hold the rear of the switch to open
This feature uses ultrasonic sensors
on the rear bumpers to help you avoidcolliding with objects when parking thevehicle. It operates only at speeds lessthan 5 mph.
The rear parking assist display is
located near the rear window on thepassenger side. The lights on the
display provide
distance information. Lowtonedbeeps play out ofthe speakers (forobjects near therear bumper).
To turn off the
system, press the (Rear Parking
Assist) disable button, located below the
climate controls on the instrument panel.The indicator light will illuminate when
the system is off.
See Section 3 of your Owner Manual.
Ultrasonic Rear Parking Assist
(if equipped)
Note: The Ultrasonic Rear Parking
Assist (URPA) system will not activate
if you have a trailer hitch and trailerattached to your vehicle, or a bicycle orother object was hanging out of your
vehicle, when you last turned off thevehicle. Removing the attached orhanging objects and driving the vehicleforward above 15 mph will restore the
URPA system to normal operation.
Sierra 2008 A 5/16/07 7:50 AM Page 18

apply the trailer brakes. ITBC system
information is displayed on the Driver
Information Center.
See Section 4 of your Owner Manual
Getting to Know Your Sierra22
vehicle has been sitting for at least three
hours or driven no more than one mile.
You can temporarily clear the DIC
message by acknowledging it with
your DIC controls. However, at the nextvehicle startup, the DIC message willreappear if the tire pressure has notbeen corrected.
During cooler conditions, the low tire
pressure warning light may appear whenthe vehicle is first started and then turn
off as you start to drive the vehicle. Thiscould be an early indicator that your tirepressures are getting low and need tobe inflated to the proper pressure.
See Section 5 of your Owner Manual.
Note:The Tire Pressure Monitor can
alert you about low tire pressure, but itdoesn’t replace normal monthly tiremaintenance.
Integrated Trailer Brake Control
System (if equipped)
The control
panel for theIntegratedTrailer Brake
Control (ITBC)system islocated on theinstrumentpanel to theleft of the steering wheel.
The control panel allows you to adjust
the amount of output available to theelectric trailer brakes and to manuallyIf the Tighten Gas Cap message is
displayed on the Driver InformationCenter (DIC), check that your fuel cap
is properly installed. If the cap is notsecurely fastened, turn it clockwise untila clicking sound is heard, indicating that
it is properly installed. The DIC messagewill turn off after a few driving trips with
the cap properly installed.
See Sections 3 and 5 of your Owner Manual.
Tighten Gas Cap Message
Note:If the brakes are manually
applied, the brake lights do not turn on.
If your vehicle has a yellow gas cap, it
was engineered as a FlexFuel vehiclecapable of running on gasoline or E85fuel. E85 is a blend of 85% ethanol and15% gasoline. E85 is a highoctane,renewable fuel made primarily from corn
(see livegreengoyellow.com).
Your FlexFuel vehicle automatically
detects the current fuel mixture in thefuel tank and adjusts engine settings
accordingly. You can fill up with gasolineor E85, regardless of which fuel isalready in the tank.
FlexFuel (E85) – Yellow Gas Cap
(if equipped)
Sierra 2008 A 5/16/07 7:50 AM Page 22