keyless HONDA ACCORD SEDAN 2013 9.G Technology Reference Guide

1415
How It Works
O N E T O U C H T U R N S I G N A L
Use this quick and convenient method to signal a lane change.
• Lightly push the turn signallever up or down for a three
blink sequence.
• For a continuous signal\b push the lever up or down until it
locks into place.
How It Works
A U T O H E A D L I G H T S W I T H W I P E R I N T E G R A T I O N
For your safety and convenience\b your vehicle’s headlights automatically turn on when
you activate the windshield wipers.
• Make sure your headlights are in the AUTOposition.
• Turn on your windshield wipers. The headlights also turn on.
• When you turn off the windshield wipers\b the headlights turn off shortly after.
D R I V I N G P O S I T I O N M E M O R Y S Y S T E M ( D P M S )
How It Works
1. Turn on the vehicle. Make sure
the shift lever is in Park (P).3. Press SET. You will hear a beep.
4.Press the memory button
corresponding to the remote (1
or 2) you are using. You will
hear two beeps.
Note: Stored positions can also be recalled by pressing memory buttons
(1 or 2) on the door.
Store driver’s seat positions into memory for each corresponding keyless remote
(1 or 2)\b which are recalled when you unlock the driver’s door with the remote
and enter the vehicle.
2.Adjust your preferred seat
settings.
13 Accord4D TRG_TOURING\fATG_NEW\A STYLE 7/13/2012 4\f41 PM Page 9