HONDA CIVIC COUPE 2005 7.G Owners Manual

On models with in-dash CD changerOn models with in-dash CD changer
You can display the sound with
spectroscopic analysis. There are
five modes of display; Peak-Hold,
Normal, Aurora, Level and Off. Each
time you press and release the DISP
button, the mode changes f rom P.
HOLD to NORMAL to AURORA to
LEVEL, then to OFF. You see the
selected mode in the display f or
about 5 seconds as it changes.You can use the instrument panel
brightness control knob to adjust the
illumination of the audio system (see
page ). The audio system
illuminates when the parking lights
are on, even if the radio is turned of f .
You can also select the reduced
brightness in the display when the
parking lights are on. Press and hold
the DISP button for about 5 seconds
until you hear a beep to change the
brightness. Press and hold this
button again f or about 5 seconds
until you hear a beep to return to the
f ull brightness.
63
Playing the Radio
Spect roscopic A nalysis
Display bright ness
A udio System L ighting
96
——y
y
(%yy

How well the radio receives stations
is dependent on many f actors, such
as the distance from the station’s
transmitter, nearby large objects,
and atmospheric conditions.
The radio can receive the complete
AM and FM bands.
Those bands cover these f requen-
cies:
AM band: 530 to 1,710 kilohertz
FM band: 87.7 to 107.9 megahertz
Driving very near the transmitter of
a station that is broadcasting on a
f requency close to the f requency of
the station you are listening to can
also af f ect your radio’s reception.
You may temporarily hear both
stations,orhearonlythestationyou
are close to.
A radio station’s signal gets weaker
as you get f arther away f rom its
transmitter. If you are listening to an
AM station, you will notice the sound
volume becoming weaker and the
stationdriftinginandout.If youare
listening to an FM station, you will
see the stereo indicator f lickering of f
and on as the signal weakens.
Eventually, the stereo indicator will
go of f and the sound will f ade
completely as you get out of range of
the station’s signal.
Radio stations on the AM band are
assigned f requencies at least ten
kilohertz apart (530, 540, 550).
Stations on the FM band are
assigned f requencies at least 0.2
megahertz apart (87.9, 88.1, 88.3).
Stations must use these exact
f requencies. It is f airly common f or
stations to round-of f the f requency in
their advertising, so your radio could
display a f requency of 100.9 even
though the announcer may identif y
the station as ‘‘FM101.’’
CONT INUED
Radio Reception
Radio Reception
Radio Frequencies
Features
97
——y
y
(%y
y

Radio signals, especially on the FM
band, are def lected by large objects
such as buildings and hills. Your
radio then receives both the direct
signal f rom the station’s transmitter,
and the def lected signal. This causes
the sound to distort or flutter. This is
a main cause of poor radio reception
in city driving.Radio reception can be af f ected by
atmospheric conditions such as
thunderstorms, high humidity, and
even sunspots. You may be able to
receive a distant radio station one
day and not receive it the next day
because of a change in conditions.Electrical interf erence f rom passing
vehicles and stationary sources can
cause temporary reception problems.
As required by the FCC:
Changes or modif ications not expresslyapproved by the party responsible f orcompliance could void the user’sauthority to operate the equipment.
Radio Reception
98
——y
y
(%y

y

µ´
Playing a Disc
Features
99
AM/FM BUTTON
POWER/
VOLUMEKNOB
DX model
CD/TAPE BUTTON RANDOM BUTTON
REPEAT
BUTTON
DISC BUTTON DISC BUTTON
SEEK/SKIP BAR
POWER/VOLUMEKNOB
AM/FM
BUTTON CD BUTTON
CD SLOTREPEAT INDICATOR
RANDOM BUTTON
EJECT
BUTTON
REPEAT BUTTON
RANDOM INDICATOR
SEEK/ SKIP BAR LOAD BUTTON
LOADED DISC
NUMBER FOLDER INDICATOR/
NUMBER
FILE
INDICATOR/
NUMBER
DISC SLOT
DISC LOAD
INDICATOR DISPLAY
BUTTON
SEEK/SKIP
BAR
CD
BUTTON
DISC
NUMBER
RANDOM
BUTTON
FOLDER
BAR
POWER/
VOLUME KNOB
RANDOM INDICATOR
REPEAT
INDICATOR
TITLE BUTTONEJECT
BUTTON
RREPEAT BUTTON/
SCAN BUTTON
MP3 INDICATOR
Audio System with In-dash CD ChangerU.S.: Special Edition models
Canada: REVERB, Si-GA models
U.S.: Value Package, HX, LX, EX models
Canada: DX Special Edition, LX, Si-G models
——y
y
(%y
y

µ µ µ µ
On models with in-dash CD changerOn models with CD player
Optional on DX model
The in-dash CD changer can also
play CD-Rs and CD-RWs
compressed in MP3 standard. When
playing a disc in MP3, you will see
‘‘MP3’’ in the display. You can select
afolderortrackupto .
Video CDs and DVD discs will not
work in this unit.
The specif ications of the compatible
MP3 f ile are:
You operate the CD player/CD
changer with the same controls used
for the radio. To select the CD
player/CD changer, press the CD
button. You will see ‘‘CD’’ in the
display. The number of the track
playing is shown in the display. With
the in-dash CD changer, the disc and
track numbers are displayed. The
system will continuously play a disc
until you change modes.
To load or play discs, the ignition
switch must be in the ACCESSORY
(I) or ON (II) position.
Sampling f requency: 32/44.1/48kHz
Bit rate: 32/40/48/56/64/80/96/
112/128/160/192/224/256/
320 kbps
Compatible with variable bit rate
and multi-session
Maximum layers
(including ROOT): 8 layersWhile playing a disc, you can see the
playing time in the display by
cancelling the clock display (see
page ).
Insert a CD into the CD slot. The
drive will pull the CD in the rest of
the way to play it. When the system
reaches the end of the disc, it will
return to the beginning and play the
disc again.
You can also play 3-inch (8-cm) discs
without using an adapter ring.
To play the radio when a disc is
playing, press the AM/FM button.
Press the CD button again to switch
back to the CD player.
255
116
To Play a Disc
Playing a Disc
100
Do not use discs with adhesive labels.
The label can curl up and cause the
disc to jam in the unit.
——y

y
(%y
y

On models with in-dash CD changer
Your vehicle’s in-dash CD changer
hold up to six discs.Press the LOAD button until you
hear beep and see ‘‘LOAD’’ in the
display. To load only one disc,
press and release the LOAD
button. The green disc load
indicator will come on.
The disc number f or an empty
position begins blinking. You cannot load and play 3-inch
(8-cm) discs in this unit.
When the disc load indicator turns
green and ‘‘LOAD’’ appears in the
display again, insert the next disc
in the slot. Do not try to insert a
disc until ‘‘LOAD’’ appears. You
could damage the audio unit.
Repeat this until all six positions
are loaded. If you are not loading
all six positions, the system begins
playing the last disc loaded.
You can also load a disc into an
empty position while a disc is playing
by pressing the appropriate preset
button. The system stops playing the
current disc and starts the loading
sequence. It plays the disc just
loaded.
Insert the disc into the disc slot
when the green disc load indicator
comes on. Insert it only about
half way; the drive will pull it in the
rest of the way. You will see
‘‘BUSY’’ in the display while the
disc load indicator turns red and
blinks as the disc is loaded.
To play the tape when a CD is
playing, insert a tape in the player
(optional). If a tape is in the player,
press the TAPE button. Press the
CD button again, to switch back to
the CD player.
If you turn the system of f while a CD
is playing, either with the Power/
Volume knob or by turning of f the
ignition switch, the disc will stay in
the drive. When you turn the system
back on, the CD will begin playing
where it lef t of f .
1. 2. 3.4. 5.
CONT INUED
L oading Discs in t he In-dash CD
Changer
Playing a Disc
Features
101
——y
y
(%y
y

In MP3 mode with In-dash CD ChangerWith In-dash CD Changer
When you press the TITLE button
while playing a disc in MP3, the
displayshowsthefirst13characters
of the current f older or f ile name f or
about 5 seconds, then automatically
returns to the normal display.
With the f older or f ile name, you will
see the FOLDER or FILE indicator
in the display.
Each time you press the TITLE
button, the display mode changes
f rom File Name display to Folder
Name display, then to Normal
display.
If thefolderorfilenamehasmore
than 13 characters and the name is
displayed, press and hold the TITLE
button until you hear a beep. The
display will show the next 13
characters f or about 5 seconds. Tosee all characters of the f older or f ile
name, repeat this step.
If you press the TITLE button when
the last character(s) is displayed,
you hear two beeps, then the display
shows the f irst 13 characters again.
You will also see the f older or f ile
name in the f ollowing conditions:
When the f older or the f ile is
changed.
When you change the audio mode
to play discs in MP3 and the
system begins to play.
When you insert a disc and the
system begins to play. You can use the SEEK/SKIP bar
while a disc is playing to select
passages and change tracks (f iles in
MP3 mode).
To select a dif f erent disc, press the
appropriate preset button (1 to 6). If
you select an empty position, the
system will go into the loading
sequence (see page ).
In MP3 mode, use the FOLDER bar
to select f olders in the disc and use
the SEEK/SKIP bar to change files.
101
Folder Name and File Name Display
Function T o Change or Select T racks/Files
Playing a Disc
102
——y
y
(%y
y

µµ
µ µ
Each time you
press and release the / side of the SEEK/SKIP bar,
the player skips forward to the
beginning of the next track (f ile in
MP3 mode). Press and release the / side, to skip backward
to the beginning of the current track.
Press it again to skip to the
beginning of the previous track.
To move rapidly within a track, press
andholdthe / or /
side of the SEEK/SKIP bar.
You will see CUE or REW in the
display while moving.
While moving forward or backward,
thetimedisplaychangestothe
track/f ile playing time. Af ter
releasing the bar, the display goes
back to the time display. To
select a different folder, press and
release the ‘‘ ’’ side of the
FOLDER bar to move the beginning
of the next f older. Press and release
the‘‘ ’’sidetomovethe
beginning of the current f older.
Press and release it again to skip to
the beginning of the previous f older.
To continuously replay
a track (f ile in MP3 mode), press and
release the RPT button. You will see
RPT in the display. Press the RPT
button again to turn it off. With the
in-dash CD changer, press the RPT
button two or three times depending
on the selected mode to return to
normal playing. Pressing either side of the SEEK/
SKIP bar or selecting a dif f erent disc
with a preset button also turns of f
the repeat f eature.
This feature,
when activated, replays all the tracks
(all f iles in each f older in MP3 mode)
on the selected disc in the order they
are recorded on the disc. To activate
the disc repeat f eature, select the
Disc-Repeat mode by pressing the
RPT button repeatedly. You will see
D-RPT in the display. The system
continuously replays the current disc.
Press the RPT button again to turn it
off. Pressing the RDM button or
selecting a dif f erent disc with a
preset button also turns of f the
repeat feature.
Except f or models with in-dash CD
changer
On models with in-dash CD changer In MP3 mode with In-dash CD Changer With In-dash CD Changer
With In-dash CD Changer
CONT INUED
SEEK /SK IPFOLDER SELECTION
REPEAT (TRACK/FILE
REPEAT)DISC-REPEA T
Playing a Disc
Features
103
——y

y
(%y
y

µµ µ
In MP3 mode with In-dash CD Changer
In CD mode with In-dash CD Changer In MP3 mode with In-dash CD Changer
With In-dash CD Changer In MP3 mode with In-dash CD Changer
This feature,
when activated, replays all the f iles
on the selected f older in the order
they are compressed in MP3. To
activate Folder Repeat mode, press
the RPT button. You will see F-RPT
in the display. The system
continuously replays the current
folder. Press the RPT button again to
turn it off. Pressing the RDM button,
selecting a dif f erent disc with a
preset button, or selecting a dif f erent
folder with the FOLDER bar also
turns of f the repeat f eature. This f eature plays the
tracks (all f iles in each f older in MP3
mode) within a disc in random order.
To activate Random Play, press and
release the RDM button. In MP3
mode, press the RDM button twice
to select Within a Disc Random Play.
You will see RDM in the display.
Press the RDM button again to
return to normal play.
Selecting a dif f erent disc with a
preset button also turns of f the
random f eature. This
f eature, when activated, plays the
f iles within a f older in random order,
rather than in the order they are
compressedinMP3.Toactivate
Folder Random play, press the RDM
button. You will see F-RDM in the
display. The system will then select
and play f iles randomly. This
continues until you deactivate Folder
RandomPlaybypressingtheRDM
button again, or you select a
dif f erent disc with a preset button or
a different folder with the FOLDER
bar.
Each time you press and release the
RDM button, the mode changes
f rom Folder Random Play to Within
a Disc Random Play, then to normal
playing.
Each time you press and release the
RPT button, the mode changes f rom
File Repeat to Folder Repeat to Disc
Repeat, then to normal playing.
Each time you press and release the
RPT button, the mode changes from
Track Repeat to Disc Repeat, then to
normal playing.
FOL DER-REPEA T
RANDOM (Random within a
Disc)FOLDER-RANDOM
Playing a Disc
104
——y

y
(%y
y

µµ
In CD mode with In-dash CD Changer In MP3 mode with In-dash CD ChangerExcept f or models with in-dash CDchanger
The SCAN f unction
samples all the tracks on the
selected disc in the order they are
recorded on the disc. To activate the
Scan f eature, press and hold the
SCAN button until you hear a beep.
You will see SCAN in the display.
You will get a 10 second sampling of
each track on the selected disc.
Press the SCAN button again to get
out of the system and play the last
track sampled.
Pressing either side of the SEEK/
SKIP bar or selecting a dif f erent disc
with a preset button also turns of f
the scan feature. This f eature, when
activated, samples all the files in the
selected f older in the order they are
compressedinMP3.Toactivatethe
Folder Scan f eature, press and hold
the SCAN button until you hear a
beep. You will see F-SCAN in the
display. The system will then play
the f irst f ile f or about 10 seconds. If
you do nothing, the system will then
play the f ollowing f iles f or 10
seconds each. When it plays a f ile
that you want to continue listening to,
press the SCAN button again.
Pressing either side of the SEEK/
SKIP bar, selecting a dif f erent disc
with a preset button, or a dif f erent
folder with the FOLDER bar also
turns off the scan feature. Press the eject button ( ) to
remove the CD. If you eject the CD,
but do not remove it f rom the slot,
the system will automatically reload
the CD af ter 15 seconds and put it in
pause mode. To begin playing, press
the CD button.
Press the AM/FM button to switch
to the radio while a CD is playing. To
play the CD, press the CD button.
If a tape is in the optional tape player,
press the TAPE button to switch to
the tape while a CD is playing. Press
the CD button again to switch back
to the CD player.
CONT INUED
SCAN F-SCAN
To Stop Playing a Disc
Playing a Disc
Features
105
——y
y
(%y
y