phone HONDA INSIGHT 2014 2.G Technology Reference Guide

Accessing the MultiInformation Display
MID Main Display
Bluetooth®HandsFreeLink®*
IMA System Power Flow Monitor
Average Speed
Elapsed Time
Ecological Drive Display
Average Fuel Economy Records
Instant and Average FuelEconomy A\fB
Range
*if a phone is paired and active
MID Main Displays
When you start the engine, the
MID shows the main display.
45
MULTIINFORMATION DISPLAY (MID)Consists of several displays that provide you with useful information.
To toggle between the MID
displays:
• Press either Info button
(p\fq) for the main displays.
• Press SEL\fRESET for the subdisplays.
SEL/RESET
Button
Info
Buttons
14 Insight EX NAV TRG_A\ATG_NEW STYLE 7/2\b/\A2013 10\f25 AM Pag\Ae 4

V O I C E R E C O G N I T I O N
Voice Command Tips
1415
PickUp button: Answer an
incoming call, or go directly to the
Phone screen.
Talk button: Say navigation, HFL,
audio, or climate control commands.
HangUp button: End a call or
decline a call.
Back button: Cancel a command
and return to the previous screen.
The voice control system uses the steering wheel buttons and ce\0iling microphone.
To reduce the potential for driver distraction, certain manual and touch
screen functions may be inoperable or grayed out while the vehicle is
moving. Voice commands are always available.
Voice Control System
R E A R V I E W C A M E R A
How It Works
• When you shift into Reverse (R), a realtime image of the area behind your vehicleis shown in the navigation display.
• The rearview display turns off when you shift out of Reverse.
For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up.
Parking Guidelines
• Yellow parking guidelines also appear to help you judge distance. They can be turned on
or off.
• Press and hold CANCEL until the guidelines turn on or off. They remain off until you turn
them on again.
• Press and release the Talk button, wait for a beep, then say a command.
• All available voice commands are highlighted in blue when you press the Talk
button.
• For a list of available commands, press and release the Talk button and say “Help” at any time. For a full list of commands, say “Display information” and “Voice
info,” or see your Navigation Manual.
• Speak in a clear, natural voice, and reduce all background noise.
• Adjust the dashboard and side vents away from the microphone in the ceiling.
• Close the windows.
• The system also uses a touchscreen display. You can select options or icons by touching them on the screen. This is limited while the vehicle is moving.
To keep your eyes on the road and hands on the wheel, use the Talk button to say
voice commands to operate certain vehicle features.
14 Insight EX NAV TRG_A\ATG_NEW STYLE 7/2\b/\A2013 10\f2\b AM Page\A 9

Commonly Used Voice Commands
Here are some examples of commonly used voice commands. Try some of these
to familiarize yourself with the voice command system.
G e n e r a l C o m m a n d s(Accepted on most screens to change displays)
• Display map
• Display menu
• Display information
• Display audio
• What time is it?
• Next\fprevious
(to change pages)• Left\fright (to change tabs)• Up\fdown(to scroll lists up to three pages)
F i n d P l a c e C o m m a n d s(Accepted on Map screen)
• Find nearest: ATM Honda dealer
gas station airport
Mexican hospital restaurant bank
post office
N a v i g a t i o n C o m m a n d s(Accepted on Map screen)
• How long\ffar to the destination?
• Display destination map
• Display entire route
D i s p l a y C o m m a n d s(Accepted on Map screen)
• Display\fHide: ATM
gas station
restaurant
post office
• Display north up\fheading up
• Zoom in\fout
• Go home
• Display current location
A u d i o C o m m a n d s(Accepted on most screens)
• Radio on
• Radio # FM\fAM
• Radio preset 1\f2\f3\f4\f5\f6
• DISC\fUSB\fiPod play
• DISC\fUSB\fiPod skip forward\fback
• Auxiliary (AUX) play
H e l p C o m m a n d s(Accepted on most screens)
• Help (list of available commands for current screen)
• Voice info from INFO screen (list of all
available commands by category)
1617
C l i m a t e C o n t r o l C o m m a n d s(Accepted on most screens)
• Air conditioner on\foff
• Rear defrost on\foff
• Climate control recirculate\f fresh air
• Fan speed up\fdown
• Temperature # degrees (# = 57–87)
• Temperature max hot\fcold
P h o n e C o m m a n d s(Accepted on Phone screen)
• Dial
• Speed Dial 1 (or 2)
• Redial
• Phonebook
• Phone setup
(Accepted on any screen)
• Dial by number
• Dial by voice tag
Press and release the Talk button before you say a command.Press and release the Talk button before you say a command.
14 Insight EX NAV TRG_A\ATG_NEW STYLE 7/2\b/\A2013 10\f2\b AM Page\A 10

FM Traffic
Displaying Traffic Information
Say “Display traffic”to view highway flow data.
Note:Traffic flow and incident icons
are only displayed on map scales of 5
miles or less.
Heavy traffic
Moderate traffic
Traffic
Flow
data
Traffic
Flow
data Incident
icon
Incident
icon
Incident
Traffic Icons
Construction
Road closed
Weather
Provides continuously updated information, including traffic speed, incidents, and
construction in major metro areas. Works in cities where a clear FM traffic signal
is available.
1. Say “Display traffic list” to view a
list of incidents on your route.
3. Say “\fvoid,” and the incident
list returns.
4. Say “Reroute” to set the new
route.
Traffic ReroutingWhen a destination is already set, you can create a detour to avoid traffic
incidents or congestion.
2021
2. Say the number of the incident you want to avoid. When the
incident appears, say “Traffic
detail.”
BLUETOOTH® HANDSFREELINK®( H F L )
Make and receive phone calls through your vehicle’s audio system. Visit
handsfreelink.honda.com to check if this feature is compatible with your phone.
To reduce the potential for driver distraction, certain manual and touch
screen functions may be inoperable or grayed out while the vehicle is
moving. Voice commands are always available.
How to Use HFL
Press and release the Talk button before you say a command.
PickUp button: Answer an
incoming call, or go directly to the
Phone screen.
Talk button: Give navigation, HFL,
audio, or climate control commands.
HangUp button: End a call or
decline a call.
Back button: Cancel a command
and return to the previous screen.
Use these buttons to navigate through the HFL menus.
Joystick/ENTER button:
Move up, down, left, or
right to scroll options, and
press to make a selection. PHONE button:
Go directly to the
Phone screen.
C\fNCEL button:
Press to cancel an
operation or return to
the previous screen.
14 Insight EX NAV TRG_A\ATG_NEW STYLE 7/2\b/\A2013 10\f2\b AM Page\A 12

2223
Pairing Your Phone
1. Press PHONE to go to the Phonescreen. A prompt appears. Say “Yes.”
2. Make sure your phone is in discovery mode. Say “OK.”
3. HFL searches for your phone. Say the number next to the phone when it
appears on the list.
If your phone does not appear:
Say “Find another phone,” and search for
HandsFreeLink from your phone.
Connect to HFL.
4. HFL gives you a fourdigit code. Enter it on your phone when prompted. The
phone is now paired.
Use this pairing method when no phone has ever been paired to the system. You
can pair your compatible phone only when the vehicle is stopped.
1. Press PHONE to go to the Phone
screen. If a prompt appears asking to
connect to a phone, say “No.”
2. Say “Phone setup.”
3. Say “Bluetooth setup add select a phone.”
4. Say “Search.”
5. Make sure your phone is in discovery mode. Say “OK.”
6. HFL searches for your phone. Say the number next to the phone when it
appears on the list.
If your phone does not appear:
Say “Find \fnother Phone,” and search for
HandsFreeLink from your phone.
Connect to HFL.
7. HFL gives you a fourdigit code. Enter it on your phone when prompted. The
phone is now paired.
Use this pairing method when a phone has already been paired to the system, or
when you want to pair an additional phone.
Press and release the Talk button before you say a command.
Press and release the Talk button before you say a command.
Dialing a Number
Enter a 10digit phone number to call.
1. Press PHONE to go to the Phonescreen.
2. Say “Dial.”
3. Say the entire phone number. For example, “\b1055512\b4.”
4. Say “Dial” to begin the call.
Using the Phonebook
1. Press PHONE to go to the Phone screen.
2. Say “Phonebook.”
3. Scroll through the list to find the name and number you want.
4. Say “Call” to begin the call.
When your phone is paired, its entire phonebook is automatically imported to
the system. This feature is inoperable when the vehicle is moving.
Press and release the Talk button before you say a command.
Note:
You can also say “Dial by number,” followed by the phone number
and “Dial” from any screen.
Press and release the Talk button before you say a command.
14 Insight EX NAV TRG_A\ATG_NEW STYLE 7/2\b/\A2013 10\f2\b AM Page\A 13

2425
Playing BluetoothAudio
BLUETOOTH®AUDIO
Play stored or streaming audio from your compatible phone through your vehicle’s
audio system. Visit handsfreelink.honda.comto check if this feature is compatible with
your phone.
1. Make sure your phone is on and paired to Bluetooth®HandsFreeLink®
(see page 21).
3. From your phone, open the desired audio player or app and begin playing.
Sound is redirected to the audio
system.
Make sure the volume on your phone
is properly adjusted. 4. Press
(9) (:) or (\b) ()to change
tracks.
2. Press CD\fAUX until Bluetooth Audio
mode appears.
Notes:
• You may need to enable additional Bluetooth settings on your phone for playback.
• The play\fpause function and remote audio controls may not be supported on all phones.
• Only operate your phone when your vehicle is stopped.
Receiving a Call
Press the HangUp button to
end or decline the call.
A notification is heard and the following screen appears:
Press the PickUp button to
accept the call.
Using Speed Dial
Store up to 15 numbers for quick calling. See your Navigation Manual for
instructions on storing voice tags. 1. Press PHONE to go to the Phonescreen.
2. Say “Speed Dial 1” (or “Speed Dial 2”) and the number next to the entry.
For example, “One.”
3. Say “Call” to begin the call.
Press and release the Talk button before you say a command.
Note: If an entry has a stored voice tag, you can say “Dial by voice tag,”
followed by the voice tag name and “Dial” from any screen.
14 Insight EX NAV TRG_A\ATG_NEW STYLE 7/2\b/\A2013 10\f2\b AM Page\A 14