light HYUNDAI ELANTRA 2022 Owners Manual

Page 382 of 584

Driver assistance system
7-54
WARNING
Take the following precautions when
using Blind-Spot Safety system:
[For your safety, change the Settings
after parking the vehicle at a safe
location.
[If any other system’s warning
message is displayed or audible
warning is generated, Blind-Spot
Safety system’s warning message
may not be displayed and audible
warning may not be generated.
[You may not hear the warning sound
of Blind-Spot Safety system if the
surrounding is noisy.
[Blind-Spot Safety system may not
operate if the driver applies the
brake pedal to avoid collision.
[When Blind-Spot Safety system
is operating, braking control by
the system will automatically
cancel when the driver excessively
depresses the accelerator pedal or
sharply steers the vehicle.
[During Blind-Spot Safety system
operation, the vehicle may stop
suddenly injuring passengers and
shifting loose objects. Always have
the seat belt on and keep loose
objects secured.
[Even if there is a problem with Blind-
Spot Safety system, the vehicle’s
basic braking performance will
operate normally.
[Blind-Spot Safety system does not
operate in all situations or cannot
avoid all collisions. [Blind-Spot Safety system may warn
the driver late or may not warn the
driver depending on the road and
driving conditions.
[Driver should maintain control
of the vehicle at all times. Do not
depend on Blind-Spot Safety system.
Maintain a safe braking distance, and
if necessary, depress the brake pedal
to reduce driving speed or to stop
the vehicle.
[Never operate Blind-Spot Safety
system on people, animal, objects,
etc. It may cause serious injury or
death.
WARNING
The brake control may not operate
properly depending on the status of
ESC (Electronic Stability Control).
There will only be a warning when:
-The ESC (Electronic Stability Control)
warning light is on
-ESC (Electronic Stability Control) is
engaged in a different function

Page 383 of 584

07
7-55
Function malfunction and
limitations
Function malfunction
OTM070099N
When Blind-Spot Safety system is not
working properly, the ‘Check Blind-Spot
6DIHW\V\VWHP V TZDUQLQJPHVVDJHZLOO
appear on the cluster, and the system
will turn off automatically or the system
will be limited. We recommend that the
system be inspected by an authorized
HYUNDAI dealer.
OTM070100N
When the outside rearview mirror
warning light is not working properly, the
S&KHFNVLGHYLHZPLUURUZDUQLQJOLJKWT
warning message will appear on the
cluster. We recommend that the system
be inspected by an authorized HYUNDAI
dealer.
Function disabled
OTM070098N
When the rear bumper around the rear
corner radar or sensor is covered with
foreign material, such as snow or rain,
or installing a trailer or carrier, it can
reduce the detecting performance and
temporarily limit or disable Blind-Spot
Safety system.
If this occurs, the ‘Blind-Spot Safety
V\VWHP V GLVDEOHG5DGDUEORFNHGT
warning message will appear on the
cluster.
The function will operate normally
when such foreign material or trailer,
etc. is removed, and then the engine is
restarted.
If the function does not operate normally
after it is removed, we recommend
that the system be inspected by an
authorized HYUNDAI dealer.
WARNING
[Even though the warning message
does not appear on the cluster, Blind-
Spot Safety system may not properly
operate.
[Blind-Spot Safety system may not
properly operate in an area (e.g. open
terrain) where any substance are
not detected right after the engine
is turned on, or when the detecting
sensor is blocked with foreign
material right after the engine is
turned on.

Page 402 of 584

Driver assistance system
7-74
OTM058156E
(1) Cruise indicator
(2) Set speed
Cruise Control will allow you to drive at
speeds above 20 mph (30 km/h) without
depressing the accelerator pedal.
Function operation
To set speed
1. Accelerate to the desired speed,
which must be more than 20 mph (30
km/h).
OCN70600602. Press the Driving Assist button at
the desired speed. The set speed
and Cruise (
) indicator will
illuminate on the cluster.
3. Release the accelerator pedal.
Vehicle speed will maintain the set
speed even when the accelerator
pedal is not depressed.
Information
On a steep slope, the vehicle may slightly
slow down or speed up while driving uphill
or downhill.
CRUISE CONTROL ãCCä ãIF EQUIPPEDä

Page 416 of 584

Driver assistance system
7-88
[When you are towing a trailer or
another vehicle, we recommend that
Smart Cruise Control is turned off
due to safety reasons.
[Turn off Smart Cruise Control when
your vehicle is being towed.
[Smart Cruise Control may not
operate normally if interfered by
strong electromagnetic waves.
[Smart Cruise Control may not
detect an obstacle in front and lead
to a collision. Always look ahead
cautiously to prevent unexpected
and sudden situations from
occurring.
[Vehicles moving in front of you with
a frequent lane change may cause
a delay in the system's reaction or
may cause the system to react to a
vehicle actually in an adjacent lane.
Always drive cautiously to prevent
unexpected and sudden situations
from occurring.
[Always be aware of the surroundings
and drive safely, even though a
warning message does not appear or
an audible warning does not sound.
[If any other system’s warning
message is displayed or warning
sound is generated, Smart Cruise
Control warning message may not
be displayed and warning sound may
not be generated.
[You may not hear the warning sound
of Forward Collision-Avoidance
Assist if the surrounding is noisy.
[The vehicle manufacturer is not
responsible for any traffic violation
or accidents caused by the driver.
[Always set the vehicle speed to the
speed limit in your locality. Information
[Smart Cruise Control may not operate
for 15 seconds after the vehicle is
started or the front view camera or
front radar is initialized.
[You may hear a sound when the brake
is controlled by Smart Cruise Control.
Function malfunction and
limitations
Function malfunction
OCN7070056L
When Smart Cruise Control is not working
properly, the ‘Check Smart Cruise Control
V\VWHPT ZDUQLQJ PHVVDJH ZLOO DSSHDU DQG
the
warning light will illuminate on the
cluster. We recommend that the function
be inspected by an authorized HYUNDAI
dealer.

Page 417 of 584

07
7-89
Function disabled
OTM070115N
When the front radar cover or sensor
is covered with snow, rain, or foreign
material, it can reduce the detecting
performance and temporarily limit or
disable Smart Cruise Control.
If this occurs the ‘Smart Cruise Control
GLVDEOHG5DGDUEORFNHGTZDUQLQJ
message will appear for a certain period
of time on the cluster.
The system will operate normally when
snow, rain or foreign material is removed.
WARNING
[Even though the warning message
does not appear on the cluster,
Smart Cruise Control may not
properly operate.
[Smart Cruise Control may not
properly operate in an area (e.g. open
terrain), where there is nothing to
detect after turning ON the engine.
Limitations of the functionm
Smart Cruise Control may not operate
normally, or the system may operate
unexpectedly under the following
circumstances:
[The detecting sensor or the
surroundings are contaminated or
damaged
[Washer fluid is continuously sprayed,
or the wiper is on
[The camera lens is contaminated due
to tinted, filmed or coated windshield,
damaged glass, or stuck of foreign
material (sticker, bug, etc.) on the
glass
[Moisture is not removed or frozen on
the windshield
[The field of view of the front view
camera is obstructed by sun glare
[Street light or light from an oncoming
vehicle is reflected on the wet road
surface, such as a puddle on the road
[The temperature around the front
view camera is high or low
[An object is placed on the dashboard
[The surrounding is very bright
[The surrounding is very dark, such as
in a tunnel, etc.
[The brightness changes suddenly, for
example when entering or exiting a
tunnel
[The brightness outside is low, and the
headlamps are not on or are not bright
[Driving in heavy rain or snow, or thick
fog
[Driving through steam, smoke or
shadow

Page 418 of 584

Driver assistance system
7-90
[Only part of the vehicle is detected
[The vehicle in front has no tail lights,
tail lights are located unusually, etc.
[The brightness outside is low, and the
tail lamps are not on or are not bright
[The rear of the front vehicle is small
or does not look normal (i.e. tilted,
overturned, etc.)
[ 7KHIURQWYHKLFOHTVJURXQGFOHDUDQFHLV
low or high
[A vehicle suddenly cuts in front
[Your vehicle is being towed
[Driving through a tunnel or iron bridge
[Driving near areas containing metal
substances, such as a construction
zone, railroad, etc.
[A material is near that reflects very
well on the front radar, such as a
guardrail, nearby vehicle, etc.
[The bumper around the front radar is
impacted, damaged or the front radar
is out of position
[The temperature around the front
radar is high or low
[Driving in large areas where there are
few vehicles or structures (i.e. desert,
meadow, suburb, etc.)
[The vehicle in front is made of
material that does not reflect on the
front radar
[Driving near a highway (or motorway)
interchange or tollgate
[Driving on a slippery surface due to
snow, water puddle, ice, etc.
[Driving on a curved road
[The vehicle in front is detected late
[The vehicle in front is suddenly
blocked by a obstacle
[The vehicle in front suddenly changes
lane or suddenly reduces speed [The vehicle in front is bent out of
shape
[ 7KHIURQWYHKLFOHTVVSHHGLVIDVWRU
slow
[With a vehicle in front, your vehicle
changes lane at low speed
[The vehicle in front is covered with
snow
[Unstable driving
[You are on a roundabout and the
vehicle in front is not detected
[You are continuously driving in a circle
[Driving in a parking lot
[Driving through a construction area,
unpaved road, partial paved road,
uneven road, speed bumps, etc.
[Driving on an incline road, curved
road, etc.
[Driving through a roadside with trees
or streetlights
[The adverse road conditions cause
excessive vehicle vibrations while
driving
[Your vehicle height is low or high
due to heavy loads, abnormal tire
pressure, etc.
[Driving through a narrow road where
trees or grass are overgrown
[There is interference by
electromagnetic waves, such as
driving in an area with strong radio
waves or electrical noise

Page 430 of 584

Driver assistance system
7-102
Lane Following Assist is designed to help
detect lane markings and/or vehicles on
WKHURDGDQGDVVLVWVWKHGULYHUTVVWHHULQJ
to help center the vehicle in the lane.
Detecting sensor
OCN7060030[1] : Front view camera
The front view camera is used as a
detecting sensor to help detect lane
markings and vehicles in front.
Refer to the picture above for the
detailed location of the detecting sensor.
CAUTION
For more details on the precautions
of the front view camera, refer to
“Forward Collision-Avoidance Assist
(FCA)” section in chapter 7.
Function settings
Setting
OCN7060087
Turning the function ON/OFF
With the engine on, shortly press the
Lane Driving Assist button located on the
steering wheel to turn on Lane Following
Assist. The white or green
indicator
light will illuminate on the cluster.
Press the button again to turn off the
system.
If the engine is restarted, Lane Following
Assist will maintain the last setting.
LANE FOLLOWING ASSIST ãLFAä ãIF EQUIPPEDä

Page 432 of 584

Driver assistance system
7-104
OCN7070035L
Hands-off warning
If the driver takes their hands off the
steering wheel for several seconds, the
S3ODFHKDQGVRQWKHVWHHULQJZKHHOT
warning message will appear and an
audible warning will sound in stages.
First stage : Warning message
Second stage : Warning message (red
steering wheel) and
audible warning
OCN7070060L
If the driver still does not have their
hands on the steering wheel after
the hands-off warning, the ‘Driving
&RQYHQLHQFHV\VWHPVFDQFHOHGTZDUQLQJ
message will appear and Lane Following
Assist will be automatically canceled.
WARNING
[Lane Following Assist does not
operate at all times. It is the
responsibility of the driver to safely
steer the vehicle and to maintain the
vehicle in its lane.
[The hands–off warning message
may appear late depending on road
conditions. Always have your hands
on the steering wheel while driving.
[If the steering wheel is held very
lightly the hands–off warning
message may appear because the
system may not recognize that the
driver has their hands on the steering
wheel.
[If you attach objects to the steering
wheel, the hands-off warning may
not work properly.
Information
[You may change settings from the
instrument cluster (User Settings) or
infotainment system (Vehicle Settings),
whichever option that is provided with
your vehicle. For more details, see
"User Settings" section in chapter 4, or
"Vehicle Settings" section in supplied
Infotainment Manual.
[When both lane markings are detected,
the lane lines on the cluster will change
from grey to white.

Page 433 of 584

07
7-105
„Lane undetected
‡Type A‡Type B
OCN7060172NOCN7060178N
„Lane detected
‡Type A‡Type B
OCN7060174NOCN7060176N
[If lane markings are not detected,
steering wheel control by Lane
Following Assist can be limited
depending on whether a vehicle is in
front or the driving conditions of the
vehicle.
[Even though the steering is assisted
by Lane Following Assist, the driver
may control the steering wheel.
[The steering wheel may feel heavier
or lighter when the steering wheel is
assisted by Lane Following Assist than
when it is not.
Function malfunction and
limitations
Function malfunction
OTM070118N
When Lane Following Assist is not
working properly, the ‘Check Lane
)ROORZLQJ$VVLVW /)$ V\VWHPTZDUQLQJ
message will appear on the cluster. If this
occurs, we recommend that the function
be inspected by an authorized HYUNDAI
dealer.
WARNING
For more details on the system
precautions, refer to “Lane Keeping
Assist (LKA)” section in chapter 7.
Limitations of the function
For more details on function limitations,
refer to “Lane Keeping Assist (LKA)”
section in chapter 7.

Page 438 of 584

Driver assistance system
7-110
Function standby
When Smart Cruise Control is
temporarily canceled while Highway
Driving Assist is operating, Highway
Driving Assist will be in the standby state.
At this time, Lane Following Assist will
operate normally.
Function malfunction and
limitations
System malfunction
OTM070120N
When Highway Driving Assist or Highway
Lane Change function is not working
properly, the ‘Check Highway Driving
$VVLVW +'$ V\VWHPT ZDUQLQJ PHVVDJH
will appear, and the
warning light will
illuminate on the cluster. We recommend
that the function be inspected by an
authorized HYUNDAI dealer.
WARNING
[The driver is responsible for
controlling the vehicle for safe
driving.
[Always have your hands on the
steering wheel while driving.
[Highway Driving Assist is a
supplemental function that assists
the driver in driving the vehicle
and is not a complete autonomous
driving system. Always check road
conditions, and if necessary, take
appropriate actions to drive safely.
[Always have your eyes on the road,
and it is the responsibility of the
driver to avoid violating traffic laws.
The vehicle manufacturer is not
responsible for any traffic violation
or accidents caused by the driver.
[Highway Driving Assist may not
be able to recognize all traffic
situations. The function may not
detect possible collisions due to
limitations of the system. Always
be aware of the limitations of the
system. Obstacles such as vehicles,
motorcycles, bicycles, pedestrians,
unspecified objects, structures, etc.
that may collide with the vehicle may
not be detected.
[Highway Driving Assist will turn off
automatically under the following
situations:
-Driving on roads that the system
does not operate, such as a rest
area, intersection, junction, etc.
-The navigation does not operate
properly such as when the
navigation is being updated or
restarted

Page:   < prev 1-10 ... 91-100 101-110 111-120 121-130 131-140 141-150 151-160 161-170 171-180 ... 180 next >