reverse HYUNDAI ELANTRA 2022 Workshop Manual

09
9-57
Bulb type
OCN7080073LOCN7080073L
1. Remove the lamp assembly from the
vehicle by prying the lens and pulling
the assembly out.
2. Disconnect the bulb electrical
connector.
3. Separate the socket and the
lens parts by turning the socket
counterclockwise until the tabs on the
socket align with the slots on the lens
part.
4. Remove the bulb by pulling it straight
out.
5. Insert a new bulb in the socket.
6. Reassemble the socket and the lens
part.
7. Connect the bulb electrical connector.
8. Reinstall the lamp assembly to the
body of the vehicle.
Rear combination lamp bulb
replacement
„„Type AType A
OCN7090018NOCN7090018N
„„Type BType B
OCN7H090026NOCN7H090026N
„„Type CType C
OCN7H090025NOCN7H090025N
(1) Stop lamp (LED or bulb)
(2) Tail lamp (LED or bulb)
(3) Turn signal lamp
(4) Reverse lamp
(5) Rear side marker (LED or bulb)
CN7 HMA 9.indd 9-572020-12-03 9:42:32

09
9-59
Tail lamp/Stop lamp (Inner lamp)
(Bulb type)
1. Open the trunk.
2. Loosen the retaining screw of the
trunk lid cover and then remove the
cover.
OCN7080040OCN7080040
3. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on the
assembly.
4. Remove the bulb by pulling it out.
5. Insert a new bulb by inserting it into
the socket.
6. Reinstall the trunk lid cover by
pushing in the screw.
Reverse lamp (Inner lamp)
(Bulb type)
1. Disconnect the connector and then
remove the nuts by turning the nuts
counter clockwise.
2. Take the light assembly out.
OCN7080053OCN7080053
3. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on the
assembly.
4. Remove the bulb by pulling it out.
5. Insert a new bulb by inserting it into
the socket.
6. Install the light assembly to the trunk.
7. Reinstall the trunk lid cover by
pushing in the screw.
Stop/Tail lamp and rear side marker
(LED type)
If the LED lamp does not operate, we
recommend that you have the vehicle
checked by an authorized HYUNDAI
dealer.
CN7 HMA 9.indd 9-592020-12-03 9:42:36

Maintenance
9-60
High mounted stop lamp
replacement
OCN7080032OCN7080032
OAD075042OAD075042[A] : High mounted stop lamp
1. Open the trunk.
2. Remove the socket by turning it
counterclockwise until the tabs on the
socket align with the slots.
3. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on the
bulb align with the slots in the socket.
Pull the bulb out of the socket.
4. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
5. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly.
Push the socket into the assembly and
turn the socket clockwise.
License Plate Light Bulb
Replacement
OCN7080035OCN7080035
1. Using a flat-blade screwdriver gently
pry the lens cover from the lamp
housing.
2. Remove the bulb by pulling it straight
out.
3. Install a new bulb.
4. Reinstall in the reverse order.
CN7 HMA 9.indd 9-602020-12-03 9:42:36

Index
I-10
P
Parking Brake ...................................................................................................... 9-21
Checking the Parking Brake............................................................................. 9-21
R
Rear Cross-Traffic Collision Warning (RCCW) ............................................... 7-117
Function malfunction and limitations ............................................................ 7-121
Function operation.......................................................................................... 7-119
Function settings ............................................................................................ 7-118
Rear Cross-Traffic Collision-Avoidance Assist (RCCA) ................................. 7-125
Function malfunction and limitations ............................................................ 7-131
Function operation.......................................................................................... 7-127
Function settings ............................................................................................ 7-126
Rear View Monitor (RVM) ................................................................................ 7-113
Function malfunction and limitations ............................................................ 7-116
Function operation.......................................................................................... 7-114
Function settings ............................................................................................ 7-114
Recommended Lubricants and Capacities........................................................... 2-13
Recommended SAE Viscosity Number ........................................................... 2-14
Reporting Safety Defects ..................................................................................... 2-18
Reverse Parking Collision-Avoidance Assist (PCA) ........................................ 7-138
Function malfunction and limitations ............................................................ 7-142
Function operation.......................................................................................... 7-141
Function settings ............................................................................................ 7-139
Reverse Parking Distance Warning (PDW) ...................................................... 7-135
Function malfunction and precautions .......................................................... 7-136
Function operation.......................................................................................... 7-136
S
Safe Exit Warning (SEW) ................................................................................... 7-60
Function malfunction and limitations .............................................................. 7-63
Function operation............................................................................................ 7-62
Function settings .............................................................................................. 7-61
Safety Messages..................................................................................................... 1-4
Scheduled Maintenance Services .......................................................................... 9-7
Maintenance Under Severe Usage Conditions ................................................. 9-11
Normal Maintenance Schedule (Smartstream G2.0 Atkinson) .......................... 9-8