sensor HYUNDAI GENESIS GV70 2022 Service Manual
Page 406 of 647
07
7-57
OTM070100NOTM070100N
When the side view mirror warning
light is not working properly, the ‘Check
side view mirror warning light’ warning
message will appear on the cluster
for several seconds, and the master
(
) warning light will illuminate on
the cluster. If the master warning light
illuminates, have the vehicle inspected
by an authorized retailer of Genesis
Branded products.
Safe Exit Assist disabled
OTM070098NOTM070098N
When the rear bumper around the rear
corner radar or sensor is covered with
foreign material, such as snow or rain,
or installing a trailer or carrier, it can
reduce the detecting performance and
temporarily limit or disable Safe Exit
Assist.
If this occurs, the ‘Blind-Spot Safety
system disabled. Radar blocked’ warning
message will appear on the cluster.
Safe Exit Assist will operate properly
when such foreign material or trailer,
etc. is removed, and then the engine is
restarted.
If Safe Exit Assist does not operate
properly after it is removed, have the
vehicle inspected by an authorized
retailer of Genesis Branded products.
Page 411 of 647
Driver Assistance System
7-62
Intelligent Speed Limit Assist uses
information from the detected road sign
and navigation system to inform the
driver of the speed limit and additional
information of the current road. Also,
Intelligent Speed Limit Assist helps the
driver to maintain within the speed limit
of the road.
& $ 8 7 , 2 1
, Q W H O O L J H Q W 6 S H H G / L P L W $ V V L V W P D \ Q R W
R S H U D W H S U R S H U O \ L I W K H I X Q F W L R Q L V X V H G
L Q R W K H U F R X Q W U L H V
Detecting sensor
OJK071223N OJK071223N [1]: Front view camera
Refer to the picture above for the
detailed location of the detecting sensor.
& $ 8 7 , 2 1
For more details on the precautions
R I W K H I U R Q W Y L H Z F D P H U D U H I H U W R
U ) R U Z D U G & R O O L V L R Q $ Y R L G D Q F H $ V V L V W
) & $ V V H F W L R Q L Q W K L V F K D S W H U
Information
If the navigation system is available, the
information from the navigation system is
used along with the road sign information
detected by the front view camera.
Intelligent Speed Limit Assist
Settings
Setting features
OJK071224NOJK071224N
Speed Limit
With the engine on, select or deselect
S ' U L Y H U $ V V L V W D Q F H
Page 414 of 647
07
7-65
Intelligent Speed Limit Assist
Malfunction and Limitations
Intelligent Speed Limit Assist
malfunction
OJK071215N OJK071215N
When Intelligent Speed Limit Assist is not
working properly, the ‘Check Speed Limit
system’ warning message will appear on
the cluster for several seconds, and the
master (
) warning light will illuminate
on the cluster. If this occurs, have the
vehicle inspected by an authorized
retailer of Genesis Branded products.
Intelligent Speed Limit Assist
disabled
OJK071216N OJK071216N
When the front windshield where the
front view camera is located is covered
with foreign material, such as snow
or rain, it can reduce the detecting
performance and temporarily limit or
disable Intelligent Speed Limit Assist.
If this occurs, the ‘Speed Limit system
disabled. Camera obscured’ warning
message will appear on the cluster.
Intelligent Speed Limit Assist will operate
properly when snow, rain or foreign
material is removed.
If Intelligent Speed Limit Assist does not
operate properly after it is removed, have
the vehicle inspected by an authorized
retailer of Genesis Branded products.
: $ 5 1 , 1 *
• ( Y H Q W K R X J K W K H Z D U Q L Q J P H V V D J H R U
warning light does not appear on the
F O X V W H U , Q W H O O L J H Q W 6 S H H G / L P L W $ V V L V W
P D \ Q R W R S H U D W H S U R S H U O \
• If the detecting sensor is
F R Q W D P L Q D W H G L P P H G L D W H O \ D I W H U
V W D U W L Q J W K H H Q J L Q H , Q W H O O L J H Q W
6 S H H G / L P L W $ V V L V W P D \ Q R W R S H U D W H
S U R S H U O \
Page 416 of 647
07
7-67
% D V L F I X Q F W L R Q
Driver Attention Warning can help
determine the driver's attention level
by analyzing driving pattern and driving
time while vehicle is being driven. Driver
Attention Warning will recommend a
break when the driver’s attention level
falls below a certain level.
/ H D G L Q J Y H K L F O H G H S D U W X U H D O H U W
function
Leading Vehicle Departure Alert function
will inform the driver when a detected
vehicle in front departs from a stop.
Detecting sensor
OJK071223NOJK071223N[1]: Front view camera
The front view camera is used as a
detecting sensor to detect driving
patterns and front vehicle departure
while vehicle is being driven.
Refer to the picture above for the
detailed location of the detecting sensor.
& $ 8 7 , 2 1
• $ O Z D \ V N H H S W K H I U R Q W Y L H Z F D P H U D L Q
good condition to maintain optimal
S H U I R U P D Q F H R I ' U L Y H U $ W W H Q W L R Q
: D U Q L Q J
• For more details on the precautions
R I W K H I U R Q W Y L H Z F D P H U D U H I H U W R
U ) R U Z D U G & R O O L V L R Q $ Y R L G D Q F H $ V V L V W
) & $ V V H F W L R Q L Q W K L V F K D S W H U
' U L Y H U $ W W H Q W L R Q : D U Q L Q J 6 H W W L Q J V
Setting features
OJK070014LOJK070014L
Driver Attention Warning
With the engine on, select or deselect
S ' U L Y H U $ V V L V W D Q F H
Page 426 of 647
07
7-77
„ „Left sideLeft side „ „Right sideRight side
OJK071201NOJK071201NOJK071202NOJK071202N
Blind-Spot View Monitor displays the
rear blind spot area of the vehicle in the
cluster when the turn signal is turned on
to help safely change lanes.
Detecting sensor
OJK071049NOJK071049N[1], [2]: Surround-side view camera
(camera located at bottom of the mirror)
Refer to the picture above for the
detailed location of the detecting
sensors.
% O L Q G 6 S R W 9 L H Z 0 R Q L W R U
Settings
Setting features
Blind-Spot View
With the engine on, select ‘Driver
$ V V L V W D Q F H
Page 428 of 647
07
7-79
Smart Cruise Control is designed to
help detect the vehicle ahead and
help maintain the desired speed and
minimum distance between the vehicle
ahead.
2 Y H U W D N L Q J $ F F H O H U D W L R Q $ V V L V W
While Smart Cruise Control is operating,
if the function judges that the driver is
determined to overtake the vehicle in
front, acceleration will be assisted.
% D V H G R Q ' U L Y L Q J 6 W \ O H L I H T X L S S H G
Smart Cruise Control will operate based
on the driver’s driving style, such as
inter-vehicle distance, acceleration,
reaction speed.
Detecting sensor
OJK071223NOJK071223N
OJK070075 OJK070075 [1]: Front view camera, [2]: Front radar
The front view camera and front radar
are used as a detecting sensor to help
detect vehicles in front.
Refer to the picture above for the
detailed location of the detecting sensor.
& $ 8 7 , 2 1
$ O Z D \ V N H H S W K H I U R Q W Y L H Z F D P H U D
and front radar in good condition to
maintain optimal performance of Smart
& U X L V H & R Q W U R O
For more details on the precautions of
W K H I U R Q W Y L H Z F D P H U D D Q G I U R Q W U D G D U
U H I H U W R U ) R U Z D U G & R O O L V L R Q $ Y R L G D Q F H
$ V V L V W ) & $ V V H F W L R Q L Q W K L V F K D S W H U
6 0 $ 5 7 & 5 8 , 6 ( & 2 1 7 5 2 /
Page 441 of 647
Driver Assistance System
7-92
Smart Cruise Control disabled
OTM070115N OTM070115N
When the front radar cover or sensor
is covered with snow, rain, or foreign
material, it can reduce the detecting
performance and temporarily limit or
disable Smart Cruise Control.
If this occurs the ‘Smart Cruise Control
disabled. Radar blocked’ warning
message will appear for a certain period
of time on the cluster.
Smart Cruise Control will operate properly
when snow, rain or foreign material is
removed.
: $ 5 1 , 1 *
( Y H Q W K R X J K W K H Z D U Q L Q J P H V V D J H G R H V
Q R W D S S H D U R Q W K H F O X V W H U 6 P D U W & U X L V H
& R Q W U R O P D \ Q R W S U R S H U O \ R S H U D W H
& $ 8 7 , 2 1
6 P D U W & U X L V H & R Q W U R O P D \ Q R W S U R S H U O \
R S H U D W H L Q D Q D U H D H J R S H Q W H U U D L Q
where there is nothing to detect after
W X U Q L Q J 2 1 W K H H Q J L Q H
Limitations of Smart Cruise Control
Smart Cruise Control may not operate
properly, or it may operate unexpectedly
under the following circumstances:
• The detecting sensor or the
surroundings are contaminated or
damaged
• Washer fluid is continuously sprayed,
or the wiper is on
• The camera lens is contaminated due
to tinted, filmed or coated windshield,
damaged glass, or sticky foreign
material (sticker, bug, etc.) on the
glass
• Moisture is not removed or frozen on
the windshield
• The field of view of the front view
camera is obstructed by sun glare
• Street light or light from an oncoming
vehicle is reflected on the wet road
surface, such as a puddle on the road
• The temperature around the front
view camera is high or low
• An object is placed on the dashboard
• The surrounding is very bright
• The surrounding is very dark, such as
in a tunnel, etc.
• The brightness changes suddenly, for
example when entering or exiting a
tunnel
• The brightness outside is low, and the
headlamps are not on or are not bright
• Driving in heavy rain or snow, or thick
fog
• Driving through steam, smoke or
shadow
Page 444 of 647
07
7-95
• Changing lanes
OADAS030 OADAS030 [A] : Your vehicle, [B] : Lane changing vehicle
When a vehicle moves into your lane
from an adjacent lane, it cannot be
detected by the sensor until it is in the
sensor's detection range. Smart Cruise
Control may not immediately detect
the vehicle when the vehicle changes
lanes abruptly. In this case, you must
maintain a safe braking distance, and
if necessary, depress the brake pedal
to reduce your driving speed in order
to maintain a safe distance.• Detecting vehicle
OJX1079181OJX1079181
In the following cases, some vehicles
in your lane cannot be detected by the
sensor:
- Vehicles offset to one side
- Slow-moving vehicles or sudden-
decelerating vehicles
- Oncoming vehicles
- Stopped vehicles
- Vehicles with small rear profile, such
as trailers
- Narrow vehicles, such as
motorcycles or bicycles
- Special vehicles
- Animals and pedestrians
Adjust your vehicle speed by
depressing the brake pedal according
to the road and driving conditions
ahead.
Page 445 of 647
Driver Assistance System
7-96
OJK071036NOJK071036N
In the following cases, the vehicle
in front cannot be detected by the
sensor:
- Vehicles with higher ground
clearance or vehicles carrying loads
that stick out of the back of the
vehicle
- Vehicles that has the front lifted due
to heavy loads
- You are steering your vehicle
- Driving on narrow or sharply curved
roads
Adjust your vehicle speed by
depressing the brake pedal according
to the road and driving conditions
ahead.
OTM058129OTM058129
• When a vehicle ahead disappears
at an intersection, your vehicle may
accelerate.
Always pay attention to road and
driving conditions while driving.
OTM058119OTM058119
• When a vehicle in front of you merges
out of the lane, Smart Cruise Control
may not immediately detect the new
vehicle that is now in front of you.
Always pay attention to road and
driving conditions while driving.
OTM058124OTM058124
• Always look out for pedestrians when
your vehicle is maintaining a distance
with the vehicle ahead.
Page 454 of 647
07
7-105
Lane Following Assist is designed to help
detect lane markings and/or vehicles on
the road, and assists the driver’s steering
to help keep the vehicle between lanes.
Detecting sensor
OJK071223NOJK071223N[1]: Front view camera
The front view camera is used as a
detecting sensor to detect lane markings
and front vehicles.
Refer to the picture above for the
detailed location of the detecting sensor.
& $ 8 7 , 2 1
For more details on the precautions
R I W K H I U R Q W Y L H Z F D P H U D U H I H U W R
U ) R U Z D U G & R O O L V L R Q $ Y R L G D Q F H $ V V L V W
) & $ V V H F W L R Q L Q W K L V F K D S W H U
Lane Following Assist Settings
Setting features
OJK070097OJK070097Turning Lane Following Assist On/Off
With the engine on, shortly press the
Lane Driving Assist button located on the
steering wheel to turn on Lane Following
Assist. The grey or green
indicator
light will illuminate on the cluster.
Press the button again to turn off the
function.
/ $ 1 ( ) 2 / / 2 : , 1 * $ 6 6 , 6 7