seat adjustment HYUNDAI I10 2022 Owners Manual

Page 39 of 486

3-7
03
‡If there are occupants in the rear
seats, be careful whilst adjusting
the front seat position.
‡Make sure that the seat is locked
in place after the adjustment. If
not, the seat might move unex-
pectedly resulting in an accident.
CAUTION
To prevent injury:
‡Do not adjust your seat whilst
wearing your seat belt. Moving
the seat cushion forward may
cause strong pressure on your
abdomen.
‡Do not allow your hands or fin-
gers to get caught in the seat
mechanisms whilst the seat is
moving.
Forward and rearward
adjustment
OAC3039002R
To move the seat forward or rear-
ward:
1. Pull up the seat slide adjustment
lever and hold it.
2. Slide the seat to the position you

desire.
3. Release the lever and make sure
the seat is locked in place. Move
forward and rearward without
using the lever. If the seat moves,
it is not locked properly.

Page 45 of 486

3-13
03

ODN8039067L
Adjust the head restraints so the
middle of the head restraints is
at the same height as the height
of the top of the eyes.
‡NEVER adjust the head restraint
position of the driver’s seat when
the vehicle is in motion.
‡Adjust the head restraint as
close to the passenger’s head as
possible. Do not use a seat cush-
ion that holds the body away
from the seatback.
‡Make sure the head restraint
locks into position after adjust-
ing it.
NOTICE
To prevent damage, NEVER hit or
pull on the head restraints.
CAUTION
When there is no occupant in the
rear seats, adjust the height of the
head restraint to the lowest posi-
tion. The rear seat head restraint
can reduce the visibility of the rear
area.
Front seat head restraints
OOSEV038012L
The driver’s and front passenger’s
seats are equipped with adjustable
head restraints for the passengers
safety and comfort.
OGB034007
Forward and rearward adjustment
The head restraint may be adjusted
forward to 3 different positions by
pulling the head restraint forward to
the desired detent. To adjust the
head restraint to it’s furthest rear-
wards position, pull it fully forward to
the farthest position and release it.